DEPC-MPR-043 Prediction of the Impact Performance of Plastics Mouldings, G D Dean and L E Crocker.
|
|
- Everett Rogers
- 6 years ago
- Views:
Transcription
1 NPL Reports DEPC-MPR-043 Prediction of the Impact Performance of Plastics Mouldings, G D Dean and L E Crocker. DEPC-MPR The Effect of Pressure on the Thermal Conductivity of Polymer Melts, A Dawson, M Rides and J Nottay. DEPC-MPR A Method for Predicting the Perceived Hardness of Soft- Touch Elastomeric Coatings and Over-Mouldings, L E Crocker, G D Dean and P E Tomlins. DEPC-MPR Physical Characterisation of Soft-Touch Materials, J. M. Urquhart and C. S. Brown, P E Tomlins, M Rides, A Dawson, M Gee, G Dean, C Hobbs, C Allen, S Gnaniah, A Calver and R Darling. DEPC-MPR Measurement of the rheological properties of adhesives, M Rides, B Duncan, A Dawson and C Allen. DEPC-MPR Correlating physical properties of adhesives with process and bonding performance, M Rides and B Duncan. DEPC-MPR Investigations into Sensation of "Softness" and Perception of the Tactile Properties of "Soft Touch" Thermoplastic Elastomers, H Petrie, N King and P Tomlins. DEPC-MPR-016 Review of Accelerated Ageing Methods and Lifetime Prediction Techniques for Polymeric Materials, A S Maxwell, W R Broughton, G Dean and G D Sims March DEPC-MPR-015 Review of Techniques for Monitoring the Environmental Degradation of Polymers A.S. Maxwell, March DEPC-MPR Rheological characterisation of filled materials: a review, M. Rides. DEPC-MPR Review of Measurement and Modelling of Permeation and Diffusion in Polymers, B Duncan, J Urquhart and S Roberts. DEPC-MPR A Review of Creep Modelling for Toughened Adhesives and Thermoplastics, GD Dean and WR Broughton. DEPC-MPR Determination of Material Properties and Parameters Required for the Simulation of Impact Performance of Plastics using Finite Element Analysis, G Dean and R Mera. DEPC-MPR Modelling creep in toughened adhesives for finite element analysis, G Dean and R Mera. DEPC-MPR The Effect of Uncertainty in Heat Transfer Data on The Simulation of Polymer Processing, J. M. Urquhart and C. S. Brown.
2 MATC (A) A Comparison of the Data Requirements and Predictive Accuracies of the Cavitation Model and a Simple Model for Non-linear Behaviour in Finite Element Systems G. Dean, B. Read and L. Wright. MATC (A) Comparison of the Measured and Predicted Deformation of a Circular Plate of an ABS Polymer Under Centre Loading G. Dean and L. Wright. MATC (A) 88 - Analysis of Failure Tests on Uniaxial Tensile and Plate Specimens of ABS G. Dean and L. Wright. MATC (A) 77 - Influence of Strain Rate and Temperature on the Stress/Strain Behaviour of Rubber-Toughened Plastics B. Read, G. Dean and L. Wright. MATC (A) 75 - A Further Evaluation of the Cavitation Model for Rubbertoughened Plastics G. Dean, B. Read and L. Wright. MATC (A) 56 - Effect of die geometry on shear viscosity and entrance pressure drop determination by capillary extrusion rheometry (M Rides, C Allen) October MATC (A) 49 - Review of Test Methods for Coating Adhesion A.S. Maxwell, September MATC (A) 44 - Latent Heat of Polymers Crystallised Under Pressure (E Arranz, C Brown, S Gnaniah, S Percio) September MATC (A) 35 - Effects of Cavity Growth and Orientation Hardening on the Stress/strain Behaviour of Rubber Toughened Plastics B. Read, G. Dean and L. Wright. MATC (A) 33 - Effect of Pressure on Thermal Conductivity of Polymers (D Mulligan, C Brown, T Fry, S Percio) July MATC (A) 28 - Improved testing using the melt flow rate instrument - multi-rate and extensional flow measurements (M Rides, C Allen and A Dawson) June MATC (A) 25 - Thermal Properties of Polymer Melts at Elevated Pressure from Compression Heating and Differential Scanning Calorimetry (C Hobbs, D Ferriss, S Roberts, S Gnaniah and C Brown) October MATC (A) 05 - Practical Guide for Designers and Manufacturers of Mouldings to Reduce the Risk of Environment Stress Cracking, A.S. Maxwell, February CMMT (A)301 - A Proposed Model for the Non-linear Stress/strain Behaviour of Rubber Toughened Plastics, B. Read, G. Dean and L. Wright.
3 CMMT (A)299 - Deformation of a Centrally Loaded Circular Plate of a Thermoplastic Material: Comparison of Measurements with Predictions using Finite Element Analysis G. Dean and L. Wright. CMMT (A)298 - On the Determination of Stress-strain Curves Under Biaxial Loading, P. Tomlins, M. Yazici and G. Dean. CMMT (A) Practical Guide to Selection of Environment Stress Cracking Test Methods for Plastics A.S. Maxwell and A. Turnbull, September CMMT (A) Characterisation of Environment Stress Cracking Susceptibility of Weld-line Defects by the Chemical Probe Technique, A.S. Maxwell and A. Turnbull, August CMMT (A)266 - Illustrations of the Application of Finite Element and Processing Simulation Analyses to Plastics, G. Dean, R. Shastri and R. Hunt. CMMT (A)256 - Committee Draft of an ISO Guide to the Acquisition and Presentation of Design Data for Plastics, G. Dean and R. Shastri. CMMT (A) 248 Draft ISO Standard for the determination of the transient extensional viscosity of polymer melts (M Rides). CMMT (A) 246 A review of Requirements for Improved Methods of Measuring Thermal Properties of Polymers (S Chakravorty). CMMT (A) 245 The Properties of Waxes Used in the Investment Casting Industry: Final Report (S Chakravorty). CMMT (A) 244 Properties of Investment Casting Waxes and Industrial Evaluation (S Chakravorty). CMMT (A) 244 Specification of Pressure-Volume-Temperature (PVT) Measurements Relevant to Industrial Polymer Processing (S Chakravorty). CMMT (A) 231 Review of Melt Mass flow rate and melt volume flow rate measurements for Polymer Melts (M Rides). CMMT (A) 226 Extensional rheometry of polymer melts: comparison of various grades of polyethylene and results of a recent intercomparison (M Rides, CRG Allen and S Chakravorty). CMMT (A) 226 October 1999 Verification of Hyperelastic test methods (BC Duncan, AS Maxwell, LE Crocker and RA Hunt). CMMT (A) 224 Measurement of Reactive Polymer Systems Report of work carried out for 6MMP14/04 (A Fry, P Monaghan and M Rides).
4 NPL Technical Review No.3 - Test Methods for Environment Stress Cracking of Polymeric Materials A Turnbull and A S Maxwell, July CMMT (A) 190 Assessment of the correlation between tack and viscoelasticity (BC Duncan and K Ogilvie-Robb), June CMMT (A) 184 Comparison between rheological and bulk specimen tests for creep and stress relaxation properties (BC Duncan), May CMMT (A) 183 Hyperelastic modelling of flexible adhesives (LE Crocker, BC Duncan, RG Hughes and JM Urquhart), May CMMT (A) 182 The Influence of Shear History on the Crystallization Behaviour of Talc Filled Polypropylenes (CRG Allen and PE Tomlins). CMMT (A) 178 Measurement methods for time-dependent properties of flexible adhesives (BC Duncan and AS Maxwell), May CMMT (A) 177 Evaluation of a multi-functional adhesives test station (AS Maxwell and BC Duncan), April CMMT (A) 171 Intercomparison of extensional flow characterization techniques for polymer melts: tensile stretching and converging flow methods (M Rides, CRG Allen and S Chakravorty). CMMT (A) 163 Pressure/Volume/Temperature (PVT) Behaviour of Polymers during Ultrafast Cooling (CB Hobbs and CS Brown). CMMT (A) 147 The Influence of Phthalocyanin Blue on the Crystallization Behaviour of Polypropylene (PE Tomlins and MJ Richardson). CMMT (A) 138 The Effects of Copper Contamination on the Properties of High Density Polyethylene (CA Scoggins, PE Tomlins and MJ Bevis). CMMT (A) 126 Problems Associated with the use of Recycled Plastics within the UK (PE Tomlins and CA Scoggins). CMMT (A) 111 A Strategy for Investigating the Influence of Processing Conditions on the Dimensional Stability of Injection Moulded Artefacts (PE Tomlins, JM Urquhart, G Lord and B Butler). CMMT (A) 80 Review of converging flow methods for determining the extensional flow behaviour of polymer melts (M Rides and S Chakravorty). CMMT (A) 66 The Dimensional Stability of Moulded Parts: A Review of the Technology Base (PE Tomlins). CMMT (A) 66 Crystallization of Kinetics in Polymer Melts (PE Tomlins). CMMT (A) 60 Predicting and Controlling the Dimensional Stability of Injection Moulded Plastic Parts (PE Tomlins). CMMT (A) 52 - The Dimensional Stability of Moulded Parts: A Review of The Technology Base (PE Tomlins).
5 CMMT (A) 52- Crystallization Kinetics in Polymer Melts (PE Tomlins). CMMT (A) 44 Review of extensional viscoelasticity measurement techniques for polymer melts (M Rides, CRG Allen and S Chakravorty). CMMT (A) 38 Industrial need for extensional viscoelasticity measurements (M Rides). CMMT (A) 31 Numerical simulation of the extrudate swell behaviour of polymer melts (M Rides). CMMT (A) 30 Evaluation of Mould Designs for Preparing Standard Plate Specimens of Plastics by Injection Moulding (M Rides and G Dean). CMMT (A) 26 Protocol for the Prediction of Creep of Plastic Components (A Woolf and CS Brown). CMMT (A) 25 - Capillary Extrusion Rheometry Intercomparison Using Polyethylene and Glass-fibre Filled Polypropylene Melts: Measurement of Sheer Viscosity and Entrance Pressure Drop (M Rides and CRG Allen). CMMT (A) 20 Rheological Measurements of Polymer Melts for Characterisation and Modelling Material Behaviour (M Rides and CRG Allen). CMMT (A) 19 An Ultrasonic technique for monitoring polymer cure online (J Bromhead). CMMT (A) 13 Effect of Pressure-Volume-Temperature Behaviour of Polymer Melts on Extrudate Swell Measurements (M Rides). CMMT (A) 11 Round Robin for Parallel Plate Oscillatory Rheometry Using Polyethylene and Polypropylene Melts (M Rides and CRG Allen). CMMT (A) 9 Intercomparison of Extrudate Swell Measurements Using Capillary Extrusion Rheometers for a Polyethylene Melt (CRG Allen and M Rides). CMMT (A) 8 Measurement of the Properties of a High Density Polyethylene Fibre Optic Covering (CRG Allen and CS Brown). CMMT (A) 7 - The Pressure Dependency of the Sheer Viscosity of Polymer Melts: An International Round Robin Study (S Chakravorty, M Rides, CRG Allen and CS Brown). CMMT (A) 4 Prediction of Creep Behaviour of Plastic Components (A Woolf and BE Read). DMM (A) 167 The Significance of Thermal Material Parameters in Polymer Processing (S Chakravorty and CS Brown). DMA (A) 166 The Use of Plate Bending Waves for Elastic Property Determination of Polymers (GD Dean).
6 DMM (A) 164 Modelling the rheology of an unsaturated polyester moulding material during cure (PAJ Gibbs and M Rides). DMM (A) 149 Rheological measurement methods for fibre filled plastics (M Rides). DMM (A) 141 In-line measurement of shear viscosity using an injection moulding machine (M Rides). DMM (A) 140 The measurement of viscosity by capillary rheometry: dwell time effects (CS Brown and CRG Allen). DMM (A) 137 Temperature Measurement of Polymer Melts during Flow (S Chakravorty, CRG Allen and CS Brown). DMM (A) 131 Industrial needs for polymer melt elasticity measurements (M Rides). DMM (A) 127 Theoretical basis for elasticity measurements of polymer melts and rubbers (M Rides). DMM (A) 123 Numerical simulation of the flow of thermosetting plastics: application to injection moulding (M Rides). DMM (A) 121 On the determination of extensional viscosity from capillary rheometer entrance pressure drop measurements using a numerical simulation of contraction flow (M Rides, IA Farah, AR Davies and K Thomas). DMM (A) 120 A Technique to Predict the Curing Behaviour of Unsaturated Polyester Materials (PAJ Gibbs and M Rides). DMM (A) 114 An Ultrasonic Measurement Technique to Determine the State of Cure in Thermosetting Materials (PAJ Gibbs, M Rides and P Williamson). DMM (A) 111 The performance of gloss meters on curving surfaces (A Cook and BC Duncan). DMM (A) 110 Stress relaxation in dough moulding compounds (A Cook, D Dawson and BC Duncan). DMM (A) 109 Measurement and modelling of bolted joint stress relaxation in plastics (A Cook, D Dawson and BC Duncan). DMM (A) 107 Modelling the Inhibition Cure Behaviour of Unsaturated Polyester Moulding Materials (PAJ Gibbs and M Rides). DMM (A) 106 Characterisation of surface appearance of injection moulded Dough Moulding Compounds (A Cook and PAJ Gibbs). DMM (A) 104 DUSOL Improved Software for Analysis of Ultrasonic Velocity Data on Anisotropic Materials (A Woolf).
7 DMM (A) 92 Modelling of Creep Data for Plastics (BE Read, GD Dean and PE Tomlins). DMM (A) 91 A Model for Non-linear creep and physical aging in PVC (BE Read, GD Dean and PE Tomlins). DMA (A) 106 An FFT Microcomputer Program for determining the Velocity of Ultrasonic Waves (A Woolf).
Modelling the behaviour of plastics for design under impact
Modelling the behaviour of plastics for design under impact G. Dean and L. Crocker MPP IAG Meeting 6 October 24 Land Rover door trim Loading stages and selected regions Project MPP7.9 Main tasks Tests
More informationGeometric and Material Property Effects on the Strength of Rubber-Toughened Adhesive Joints
Geometric and Material Property Effects on the Strength of Rubber-Toughened Adhesive Joints Altering the geometry of a bonded joint will invariably cause changes to occur in the stress and strain distribution
More informationMeasurement of heat transfer coefficients for polymer processing simulation
Measurement of heat transfer coefficients for polymer processing simulation Polymeric Materials IAG Wednesday 12 March 2008 Angela Dawson, Martin Rides and Crispin Allen Heat transfer coefficient Heat
More informationA CRITERION OF TENSILE FAILURE FOR HYPERELASTIC MATERIALS AND ITS APPLICATION TO VISCOELASTIC-VISCOPLASTIC MATERIALS
MTS ADHESIVES PROGRAMME 1996-1999 PERFORMANCE OF ADHESIVE JOINTS Project: PAJ1; Failure Criteria and their Application to Visco-Elastic/Visco-Plastic Materials Report 2 A CRITERION OF TENSILE FAILURE FOR
More informationMEASUREMENT METHODS FOR OBTAINING VOLUMETRIC COEFFICIENTS FOR HYPERELASTIC MODELLING OF FLEXIBLE ADHESIVES
MEASUREMENT METHODS FOR OBTAINING VOLUMETRIC COEFFICIENTS FOR HYPERELASTIC MODELLING OF FLEXIBLE ADHESIVES by Louise Crocker and Bruce Duncan Project PAJex2 - Flexible Adhesives PAJex2 Report No 3 January
More informationRheology. A Tool for Characterization of Materials and Optimization of Polymer Processing
Rheology A Tool for Characterization of Materials and Optimization of Polymer Processing Rheology of Polymer Materials LINEAR AND NONLINEAR FLOW PROPERTIES Polymer Engineering stands for scientific and
More informationPolymer engineering syllabus (BSc)
Polymer engineering syllabus (BSc) First semester Math 1 Physics 1 Physics 1 lab General chemistry General chemistry lab workshop Second semester Math 2 Physics 2 Organic chemistry 1 Organic chemistry
More informationProject PAJ2 Dynamic Performance of Adhesively Bonded Joints. Report No. 3 August Proposed Draft for the Revision of ISO
NPL Report CMMT(A)81 Project PAJ2 Dynamic Performance of Adhesively Bonded Joints Report No. 3 August 1997 Proposed Draft for the Revision of ISO 11003-2 Adhesives - Determination of Shear Behaviour of
More informationMaterial Testing Overview (THERMOPLASTICS)
Material Testing Overview (THERMOPLASTICS) Table of Contents Thermal Conductivity... 3 Specific Heat... 4 Transition Temperature and Ejection Temperature... 5 Shear Viscosity... 7 Pressure-Volume-Temperature
More informationMeasuring the rheology of thermoplastic polymer melts
Measuring the rheology of thermoplastic polymer melts Using rotational and capillary rheometry to characterize polymer melts RHEOLOGY AND VISCOSITY Introduction Rheology is the science of studying the
More informationMechanical properties of polymers: an overview. Suryasarathi Bose Dept. of Materials Engineering, IISc, Bangalore
Mechanical properties of polymers: an overview Suryasarathi Bose Dept. of Materials Engineering, IISc, Bangalore UGC-NRCM Summer School on Mechanical Property Characterization- June 2012 Overview of polymer
More informationRHEOLOGY Principles, Measurements, and Applications. Christopher W. Macosko
RHEOLOGY Principles, Measurements, and Applications I -56081-5'79~5 1994 VCH Publishers. Inc. New York Part I. CONSTITUTIVE RELATIONS 1 1 l Elastic Solid 5 1.1 Introduction 5 1.2 The Stress Tensor 8 1.2.1
More informationHeat Transfer in Polymers
Heat Transfer in Polymers Angela Dawson, Martin Rides, Crispin Allen 18 April 2007 Heat Transfer in Polymers - Summary Introduction Heat Transfer Coefficients Standards for Thermal Properties Measurement
More informationNPL REPORT DEPC MPR. Rheological characterisation Of filled materials: a review M RIDES
RESTRICTED NPL Report NPL REPORT DEPC MPR Rheological characterisation Of filled materials: a review M RIDES NOT RESTRICTED February 2005 1 of 3 NPL
More informationLecture No. (1) Introduction of Polymers
Lecture No. (1) Introduction of Polymers Polymer Structure Polymers are found in nature as proteins, cellulose, silk or synthesized like polyethylene, polystyrene and nylon. Some natural polymers can also
More informationThermoplastic. Condensation. Homopolymer. Polymer POLYMERS. Synthetic. Natural. Addition. Copolymer. Polymer. Thermosetting
Thermoplastic Homopolymer Condensation Polymer Natural POLYMERS Synthetic Addition Polymer Copolymer Thermosetting Polymers are very large covalent molecular substances containing tens of thousands of
More informationContents. Preface. 1 What are plastics? 1. 2 Mechanical properties of polymeric materials 21
Contents Preface.XV 1 What are plastics? 1 1.0 Introduction 1 1.1 A brief history of the development of plastics 1 1.2 What are plastics, polymers and macromolecules? 3 1.3 A simple analogy for a polymer
More informationRHEOLOGY AS A POWERFULL TOOL FOR SCIENTIFIC AS WELL INDUSTRIAL CHARACTERISATION OF NEW MATERIALS BASED ON POLYMER-CLAY NANOCOMPOSITES.
RHEOLOGY AS A POWERFULL TOOL FOR SCIENTIFIC AS WELL INDUSTRIAL CHARACTERISATION OF NEW MATERIALS BASED ON POLYMER-CLAY NANOCOMPOSITES Milan Kracalik Johannes Kepler University Linz, Institute of Polymer
More informationBIRLA INSTITUTE OF TECHNOLOGY AND SCIENCE, Pilani Pilani Campus Instruction Division
Instruction Division FIRST SEMESTER 2017-18 Course Handout (Part II) Date:23/07/2017 In addition to Part I (General Handout for all courses appended to the Time Table), this portion gives further specific
More informationTHE MATRIX: EVOLUTIONS II
THE MATRIX: EVOLUTIONS II Pearl Sullivan Composites and Adhesives Group Department of Mechanical Engineering University of Waterloo IPR 28 th Annual Symposium, 16 May 2006 Scope: Multi-scale Analyses Atomic/Nanoscale
More informationISO 178 INTERNATIONAL STANDARD. Plastics Determination of flexural properties. Plastiques Détermination des propriétés en flexion
INTERNATIONAL STANDARD ISO 178 Fifth edition 2010-12-15 Plastics Determination of flexural properties Plastiques Détermination des propriétés en flexion Reference number ISO 178:2010(E) ISO 2010 PDF disclaimer
More informationRheology, Adhesion, and Debonding of Lightly Cross-linked Polymer Gels
Rheology, Adhesion, and Debonding of Lightly Cross-linked Polymer Gels Nicholas B. Wyatt, and Anne M. Grillet 2 Materials Science and Engineering Division 2 Engineering Sciences Division Sandia National
More informationImproved stress prediction in adhesive bonded optical components
Improved stress prediction in adhesive bonded optical components J. de Vreugd 1a, M.J.A. te Voert a, J.R. Nijenhuis a, J.A.C.M. Pijnenburg a, E. Tabak a a TNO optomechatronics, Stieltjesweg 1, 2628 CK,
More information(Refer Slide Time: 00:58)
Nature and Properties of Materials Professor Bishak Bhattacharya Department of Mechanical Engineering Indian Institute of Technology Kanpur Lecture 18 Effect and Glass Transition Temperature In the last
More informationPROPERTIES OF POLYMERS
PROPERTIES OF POLYMERS THEIR CORRELATION WITH CHEMICAL STRUCTURE; THEIR NUMERICAL ESTIMATION AND PREDICTION FROM ADDITIVE GROUP CONTRIBUTIONS Third, completely revised edition By D.W. VÄN KREVELEN Professor-Emeritus,
More informationHeat Transfer in Polymers
Industrial Advisory Group Heat Transfer in Polymers Chris Brown Date: October 16 th 2003 Introduction: why heat transfer in polymers? To help enhance productivity Faster heat transfer means better equipment
More informationPolymer Testing 28 (2009) Contents lists available at ScienceDirect. Polymer Testing. journal homepage:
Polymer Testing 28 (2009) 480 489 Contents lists available at ScienceDirect Polymer Testing journal homepage: www.elsevier.com/locate/polytest Test Method Intercomparison of thermal conductivity and thermal
More informationRHEOLOGICAL CHARACTERIZATION OF THERMOSETTING RES- IN SYSTEM WITH THERMOPLASTIC FUNCTIONAL LAYER
21 st International Conference on Composite Materials Xi an, 20-25 th August 2017 RHEOLOGICAL CHARACTERIZATION OF THERMOSETTING RES- IN SYSTEM WITH THERMOPLASTIC FUNCTIONAL LAYER W. Surjoseputro 1, G.
More informationAnalyzing & Testing. Comprehensive Material Characterization. Leading Thermal Analysis
Analyzing & Testing Comprehensive Material Characterization Leading Thermal Analysis Comprehensive Material Characterization What is Comprehensive Material Characterization? By combining the Thermo Scientific
More informationGB/T / ISO 527-1:1993
Translated English of Chinese Standard: GB/T1040.1-2006 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 83.080.01 G 31 GB/T 1040.1-2006 / ISO
More informationDepartment of Mechanical Engineering, Imperial College London, London SW7 2AZ, UK
5 th Australasian Congress on Applied Mechanics, ACAM 2007 10-12 December 2007, Brisbane, Australia Toughening mechanisms in novel nano-silica epoxy polymers A.J. Kinloch 1, B.B. Johnsen 1, R.D. Mohammed
More informationStrength of Adhesive Joints: A Parametric Study
Project PAJex1 - Report 3 Strength of Adhesive Joints: A Parametric Study W R Broughton, L E Crocker and J M Urquhart July 2001 NPL Materials Centre National Physical Laboratory NPL Report MATC(A)27 July
More informationHeat Transfer in Polymers
Heat Transfer in Polymers Martin Rides, Angela Dawson 27 April 2005 Heat Transfer in Polymers - summary Introduction Heat Transfer Coefficient Thermal Conductivity Thermal Imaging Industrial Demonstrations
More informationG Deant. B Readt and L Wright* tnpl Materials Centre and *Centre for Mathematics and Scientific Computing
NPL Report MATC(A)12 September 22 A Comparison of the Data Requirements and Predictive Accuracy of the Cavitation Model and a Simple Model for Non-Linear Behaviour in Finite Element Systems G Deant. B
More informationAM11: Diagnostics for Measuring and Modelling Dispersion in Nanoparticulate Reinforced Polymers. Polymers: Multiscale Properties.
AM11: Diagnostics for Measuring and Modelling Dispersion in Nanoparticulate Reinforced Polymers Polymers: Multiscale Properties 8 November 2007 Aims Provide diagnostic tools for quantitative measurement
More informationEXPERIMENTAL IDENTIFICATION OF HYPERELASTIC MATERIAL PARAMETERS FOR CALCULATIONS BY THE FINITE ELEMENT METHOD
Journal of KONES Powertrain and Transport, Vol. 7, No. EXPERIMENTAL IDENTIFICATION OF HYPERELASTIC MATERIAL PARAMETERS FOR CALCULATIONS BY THE FINITE ELEMENT METHOD Robert Czabanowski Wroclaw University
More informationANALYSIS ON PLANAR ENTRY CONVERGING FLOW OF POLYMER MELTS
Journal of Materials Science and Engineering with Advanced Technology Volume 2, Number 2, 2010, Pages 217-233 ANALYSIS ON PLANAR ENTRY CONVERGING FLOW OF POLYMER MELTS College of Industrial Equipment and
More informationOutline. Tensile-Test Specimen and Machine. Stress-Strain Curve. Review of Mechanical Properties. Mechanical Behaviour
Tensile-Test Specimen and Machine Review of Mechanical Properties Outline Tensile test True stress - true strain (flow curve) mechanical properties: - Resilience - Ductility - Toughness - Hardness A standard
More informationMATERIALS SCIENCE POLYMERS
POLYMERS 1) Types of Polymer (a) Plastic Possibly the largest number of different polymeric materials come under the plastic classification. Polyethylene, polypropylene, polyvinyl chloride, polystyrene,
More informationProperties of polypropylene modified with elastomers
Plasticheskie Massy, No. 5, 2005, pp. 31 34 Properties of polypropylene modified with elastomers G. M. Danilova-Volkovskaya Rostov State Academy of Agricultural Engineering Selected from International
More informationISO 178 INTERNATIONAL STANDARD. Plastics Determination of flexural properties. Plastiques Détermination des propriétés en flexion
INTERNATIONAL STANDARD ISO 178 Fourth edition 2001-12-15 Plastics Determination of flexural properties Plastiques Détermination des propriétés en flexion Reference number ISO 2001 PDF disclaimer This PDF
More informationA Review On Methodology Of Material Characterization And Finite Element Modelling Of Rubber-Like Materials
IOSR Journal of Engineering (IOSRJEN) ISSN (e): 50-301, ISSN (p): 78-8719 PP 06-10 www.iosrjen.org A Review On Methodology Of Material Characterization And Finite Element Modelling Of Rubber-Like Materials
More informationShear rheology of polymer melts
Shear rheology of polymer melts Dino Ferri dino.ferri@versalis.eni.com Politecnico Alessandria di Milano, 14/06/2002 22 nd October 2014 Outline - Review of some basic rheological concepts (simple shear,
More informationMechanical Properties of Polymers. Scope. MSE 383, Unit 3-1. Joshua U. Otaigbe Iowa State University Materials Science & Engineering Dept.
Mechanical Properties of Polymers Scope MSE 383, Unit 3-1 Joshua U. Otaigbe Iowa State University Materials Science & Engineering Dept. Structure - mechanical properties relations Time-dependent mechanical
More informationEXPERIMENTALLY DETERMINING THE VISCOELASTIC BEHAVIOR OF A CURING THERMOSET EPOXY R. Thorpe 1, A. Poursartip 1*
19 TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS EXPERIMENTALLY DETERMINING THE VISCOELASTIC BEHAVIOR OF A CURING THERMOSET EPOXY R. Thorpe 1, A. Poursartip 1* 1 Composites Group, Dept. of Materials
More informationCONSISTENCY OF RHEOLOGICAL EXPERIMENTS FOR PSA CHARACTERIZATION
CONSISTENCY OF RHEOLOGICAL EXPERIMENTS FOR PSA CHARACTERIZATION Dr. Laura Yao, Senior Research Chemist, Scapa North America, Windsor, CT Robert Braiewa, Research Chemist, Scapa North America, Windsor,
More informationPeriodic table with the elements associated with commercial polymers in color.
Polymers 1. What are polymers 2. Polymerization 3. Structure features of polymers 4. Thermoplastic polymers and thermosetting polymers 5. Additives 6. Polymer crystals 7. Mechanical properties of polymers
More informationCHAPTER 3 THE EFFECTS OF FORCES ON MATERIALS
CHAPTER THE EFFECTS OF FORCES ON MATERIALS EXERCISE 1, Page 50 1. A rectangular bar having a cross-sectional area of 80 mm has a tensile force of 0 kn applied to it. Determine the stress in the bar. Stress
More informationH. W. Müllner (Sp), J. Eberhardsteiner, Technische Universität Wien (A); W. Fidi, Semperit Technische Produkte Ges.m.b.H. & Co. KG, Wimpassing (A)
Dienstag, 4. Juli 2006 Tuesday, July 4, 2006, 9.30 10.00 h Section A Rheologische Charakterisierung der Strangaufweitung von Kautschukmischungen mittels numerischer Simulationen Rheological Characterisation
More informationThe Rheology Handbook
Thomas G. Mezger The Rheology Handbook For users of rotational and oscillatory rheometers 2nd revised edition 10 Contents Contents 1 Introduction 16 1.1 Rheology, rheometry and viscoelasticity 16 1.2 Deformation
More informationFundamentals of Polymer Rheology. Sarah Cotts TA Instruments Rubber Testing Seminar CUICAR, Greenville SC
Fundamentals of Polymer Rheology Sarah Cotts TA Instruments Rubber Testing Seminar CUICAR, Greenville SC Rheology: An Introduction Rheology: The study of stress-deformation relationships =Viscosity =Modulus
More informationAn Introduction to Polymer Physics
An Introduction to Polymer Physics David I. Bower Formerly at the University of Leeds (CAMBRIDGE UNIVERSITY PRESS Preface Acknowledgements xii xv 1 Introduction 1 1.1 Polymers and the scope of the book
More informationSimulation of the mechanical behavior of a rubber pumping system under large deformations.
Simulation of the mechanical behavior of a rubber pumping system under large deformations. Author: Ing. Andrea Romeo LPA Consorzio per la promozione della cultura plastica Proplast Str. Comunale Savonesa,
More informationTesting Elastomers and Plastics for Marc Material Models
Testing Elastomers and Plastics for Marc Material Models Presented by: Kurt Miller Axel Products, Inc. axelproducts.com We Measure Structural Properties Stress Strain Time-Temperature Test Combinations
More informationRheological Properties and Fatigue Resistance of Crumb Rubber Modified Bitumen
Rheological Properties and Fatigue Resistance of Crumb Rubber Modified Bitumen F. Khodary Department of Civil Engineering, Institute of traffic and transport, section of road and pavement engineering,
More informationAnalysis of Melt Spinning Master-Curves of Low Density Polyethylene
Analysis of Melt Spinning Master-Curves of Low Density Polyethylene Ji-Zhao Liang, 1 Lei Zhong, 1 Kejian Wang 2 1 Research Division of Green Function Materials and Equipment, School of Mechanical and Automotive
More informationRheology/Viscometry. Viscometry
Viscometry Capillary viscometry is considered as the most accurate method for the determination of the viscosity of Newtonian liquids. By this technique the time is measured a certain volume needs to flow
More informationMeasurements for the prediction of perceived product quality (MONAT)
Measurements for the prediction of perceived product quality (MONAT) Measurements for the prediction of perceived product quality (MONAT) Measurement of Naturalness EC Framework VI Project Properties for
More informationUsing rheology to study the hardness and spreadability of butter
Using rheology to study the hardness and spreadability of butter RHEOLOGY AND VISCOSITY Introduction Butter is a multiphase emulsion consisting of fat globules, crystalline fat and an aqueous phase dispersed
More informationPhysical Properties Testing Technical Bulletin
Technical Bulletin MANUFACTURER Raven Lining Systems 13105 E. 61 st Street, Suite A Broken Arrow, OK 74012 (918) 615-0020 TENSILE TESTING OF PLASTICS ASTM D638, ISO 527 Tensile tests measure the force
More informationVISCOELASTIC PROPERTIES OF POLYMERS
VISCOELASTIC PROPERTIES OF POLYMERS John D. Ferry Professor of Chemistry University of Wisconsin THIRD EDITION JOHN WILEY & SONS New York Chichester Brisbane Toronto Singapore Contents 1. The Nature of
More informationDynamic Mechanical Analysis of Solid Polymers and Polymer Melts
Polymer Physics 2015 Matilda Larsson Dynamic Mechanical Analysis of Solid Polymers and Polymer Melts Polymer & Materials Chemistry Introduction Two common instruments for dynamic mechanical thermal analysis
More informationInfluence Of Processing Parameters On Flexural Properties Of Injection Moulded PP Using Response Surface Approach
Influence Of Processing Parameters On Flexural Properties Of Injection Moulded PP Using Response Surface Approach Eze Somtochukwu Nebo Fidelis Welding and Fabrication Department, Scientific Equipment Onyeagba
More informationElectronic materials and components-polymer types
Introduction Electronic materials and components-polymer types Polymer science is a broad field that includes many types of materials which incorporate long chain structures with many repeated units. One
More informationPolymer Engineering (MM3POE)
Polymer Engineering (MM3POE) MELT RHEOLOGY & PROCESSING http://www.nottingham.ac.uk/~eazacl/mm3poe Melt Rheology & Processing 1 Contents Introduction to polymer processing Basic principles Common manufacturing
More informationOptical & Spectroscopic Insight into Rheology. SR Kim
Optical & Spectroscopic Insight into Rheology SR Kim 14.11.2014 Contents Rheology and Microscopy Rheology and Simultaneous FT-IR Analysis 2 3 RHEOLOGY AND MICROSCOPY What does Rheology Do? Put a defined
More informationInfluence of steady shear flow on dynamic viscoelastic properties of un-reinforced and Kevlar, glass fibre reinforced LLDPE
Bull. Mater. Sci., Vol. 27, No. 5, October 2004, pp. 409 415. Indian Academy of Sciences. Influence of steady shear flow on dynamic viscoelastic properties of un-reinforced and Kevlar, glass fibre reinforced
More informationA Standardized Mechanism to Validate Crash Models for Ductile Plastics
A Standardized Mechanism to Validate Crash Models for Ductile Plastics Megan Lobdell, Brian Croop Hubert Lobo DatapointLabs Technical Center for Materials expert material testing CAE material parameters
More informationEffect of Molecular Weight on Viscosity of Polypropylene Melt by Capillary Rheometry
RESEARCH ARTICLE Effect of Molecular Weight on Viscosity of Polypropylene Melt by Capillary Rheometry Daniel N. Njoroge Department of Mechanical and Manufacturing Engineering Aalborg University Fibigerstraede
More informationInternational Academy of Rheology Program
International Academy of Rheology Program Always one step ahead prepared for future demands The International Academy of Rheology by Anton Paar offers you the opportunity to broaden your knowledge and
More informationTOPIC 7. Polymeric materials
Universidad Carlos III de Madrid www.uc3m.es MATERIALS SCIENCE AND ENGINEERING TOPIC 7. Polymeric materials 1. Introduction Definition General characteristics Historic introduction Polymers: Examples 2.
More informationUnit title: Polymer Chemistry
Unit title: Polymer Chemistry Unit code: L/601/0415 QCF level: 5 Credit value: 15 Aim This unit enables learners to gain an understanding of aspects of the structure, reaction mechanisms and polymer preparations.
More informationDIFFERENCE IN THERMOFORMING PROCESSABILITY OBSERVED FOR THREE HIGH IMPACT POLYSTYRENES
Page 1 of 5 DIFFERENCE IN THERMOFORMING PROCESSABILITY OBSERVED FOR THREE HIGH IMPACT POLYSTYRENES Caroline Woelfle, Kurt Koppi, Stephane Costeux, Todd Hogan, Joe Dooley, Ronald Van Daele, Alexander De
More informationTransactions on Modelling and Simulation vol 10, 1995 WIT Press, ISSN X
Modelling the behaviour of rubber-like materials to obtain correlation with rigidity modulus tests S.J. Jerrams, J. Bowen School of Engineering, Coventry University, Coventry England Abstract Finite element
More informationMadrid, 8-9 julio 2013
VI CURSO DE INTRODUCCION A LA REOLOGÍA Madrid, 8-9 julio 2013 NON-LINEAR VISCOELASTICITY Prof. Dr. Críspulo Gallegos Dpto. Ingeniería Química. Universidad de Huelva & Institute of Non-Newtonian Fluid Mechanics
More informationNon-Linear Viscoelastic Modeling of Epoxy Based Molding Compound for Large Deformations Encountered in Power Modules
2017 IEEE 67th Electronic Components and Technology Conference Non-Linear Viscoelastic Modeling of Epoxy Based Molding Compound for Large Deformations Encountered in Power Modules Przemyslaw Gromala, Alexandru
More informationEVALUATION OF NONLINEAR DIFFERENTIAL MODELS FOR THE SIMULATION OF POLYMER MELTS
1 th Fall Rubber Colloquium EVALUATION OF NONLINEAR DIFFERENTIAL MODELS FOR THE SIMULATION OF POLYMER MELTS Jochen Kroll, Stefan Turek, Patrick Westervoß Institute of Applied Mathematics (LS III), TU Dortmund
More informationRheological Properties of ABS at Low Shear Rates: Effects of Phase Heterogeneity
Malaysian Polymer Journal, Vol 4, No, p9-36, 9 Available online at wwwfkkksautmmy/mpj Rheological Properties of ABS at Low Shear Rates: Effects of Phase Heterogeneity Asif Ali Qaiser *, Yasir Qayyum and
More informationPOLYMER SCIENCE : lecture 1. Dr. Hanaa J. Alshimary Second class Poly. Eng. Dep. Introduction of Polymers Polymer poly mer Monomer Polymerization
Introduction of Polymers Polymer - The word polymer is the Greek word : poly means many and mer means unit or parts, A Polymer is a large molecule that comprises repeating structural units joined by the
More informationPolymer Rheology. P Sunthar. Department of Chemical Engineering Indian Institute of Technology, Bombay Mumbai , India
Polymer Rheology P Sunthar Department of Chemical Engineering Indian Institute of Technology, Bombay Mumbai 400076, India P.Sunthar@iitb.ac.in 05 Jan 2010 Introduction Phenomenology Modelling Outline of
More informationRheological And Dielectric Characterization of Thermosetting Polymers. Jeffrey Gotro, Ph.D.
Rheological And Dielectric Characterization of Thermosetting Polymers Outline Introduction Oscillatory parallel plate rheometry Dynamic dielectric measurements Simultaneous dynamic mechanical/dielectric
More informationInvestigation of Polymer Long Chain Branching on Film Blowing Process Stability by using Variational Principle
Investigation of Polymer Long Chain Branching on Film Blowing Process Stability by using Variational Principle ROMAN KOLARIK a,b and MARTIN ZATLOUKAL a,b a Centre of Polymer Systems, University Institute
More informationLecture 7: Rheology and milli microfluidic
1 and milli microfluidic Introduction In this chapter, we come back to the notion of viscosity, introduced in its simplest form in the chapter 2. We saw that the deformation of a Newtonian fluid under
More informationExperimental Study of the Induced Residual Stresses During the Manufacturing Process of an Aeronautic Composite Material
Research Journal of Applied Sciences, Engineering and Technology 2(6): 596-602, 2010 ISSN: 2040-7467 Maxwell Scientific Organization, 2010 Submitted Date: July 28, 2010 Accepted Date: August 27, 2010 Published
More informationStress Relaxation Behaviour of PALFnDPE Composites
Chapter 7 Stress Relaxation Behaviour of PALFnDPE Composites The results presented in this chapter have been communicated for publication to Journal of Reinforced Plastics and Composites. 7.1 Introduction
More informationSTRATEGIES FOR RHEOLOGICAL EVALUATION OF PRESSURE SENSITIVE ADHESIVES
STRATEGIES FOR RHEOLOGICAL EVALUATION OF PRESSURE SENSITIVE ADHESIVES Tianhong T. Chen, Sr. Applications Scientist, TA Instruments Waters LLC, 59 Lukens Drive, New Castle, DE 9720 Abstract Pressure sensitive
More informationTesting and Analysis
Testing and Analysis Testing Elastomers for Hyperelastic Material Models in Finite Element Analysis 2.6 2.4 2.2 2.0 1.8 1.6 1.4 Biaxial Extension Simple Tension Figure 1, A Typical Final Data Set for Input
More informationMaterial Testing Report SN 7131 ISOFIL HK 30 TTH0 WT0822
Material Testing Report SN 7131 ISOFIL HK 30 TTH0 WT0822 Prepared for: SIRMAX SPA Via Dell Artigianato 42 Cittadella 35013 Italy Prepared by: Autodesk Moldflow Plastics Labs 2353 N. Triphammer Rd. Ithaca,
More informationMP10: Process Modelling
MP10: Process Modelling MPhil Materials Modelling Dr James Elliott 0.1 MP10 overview 6 lectures on process modelling of metals and polymers First three lectures by JAE Introduction to polymer rheology
More informationViscoelasticity, Creep and Oscillation Experiment. Basic Seminar Applied Rheology
Viscoelasticity, Creep and Oscillation Experiment Basic Seminar Applied Rheology Overview Repetition of some basic terms Viscoelastic behavior Experimental approach to viscoelasticity Creep- and recovery
More informationPolymers in Modified Asphalt Robert Q. Kluttz KRATON Polymers
Polymers in Modified Asphalt Robert Q. Kluttz KRATON Polymers Polymers in Modified Asphalt Types of Polymers Compatibility of Polymers Effects of Polymers Analysis of polymers Recovery of PMA What Is a
More informationDeformation of Polymers. Version 2.1. Boban Tanovic, MATTER David Dunning, University of North London
Deformation of Polymers Version 2.1 Boban Tanovic, MATTER David Dunning, University of North London Assumed Pre-knowledge It is assumed that the user is familiar with the terms elasticity, stress, strain,
More informationMaterials Engineering with Polymers
Unit 73: Unit code Materials Engineering with Polymers K/616/2556 Unit level 4 Credit value 15 Introduction This unit will provide students with the necessary background knowledge and understanding of
More informationBIAXIAL STRENGTH INVESTIGATION OF CFRP COMPOSITE LAMINATES BY USING CRUCIFORM SPECIMENS
BIAXIAL STRENGTH INVESTIGATION OF CFRP COMPOSITE LAMINATES BY USING CRUCIFORM SPECIMENS H. Kumazawa and T. Takatoya Airframes and Structures Group, Japan Aerospace Exploration Agency 6-13-1, Ohsawa, Mitaka,
More informationHIGH PRESSURE CAPILLARY RHEOMETRY ON WOOD PLASTIC COMPOSITES WITH VARIATION OF WOOD CONTENT AND MATRIX POLYMER ABSTRACT
URN (Paper): urn:nbn:de:gbv:ilm1-2014iwk-170:9 58 th ILMENAU SCIENTIFIC COLLOQUIUM Technische Universität Ilmenau, 08 12 September 2014 URN: urn:nbn:de:gbv:ilm1-2014iwk:3 HIGH PRESSURE CAPILLARY RHEOMETRY
More informationMINUTES POLYMERS MULTISCALE PROPERTIES FORTH INDUSTRIAL ADVISORY GROUP MEETING
MINUTES POLYMERS MULTISCALE PROPERTIES FORTH INDUSTRIAL ADVISORY GROUP MEETING Polymers: Multiscale Properties FORTH INDUSTRIAL ADVISORY GROUP MEETING Globe Room, Bushy House National Physical Laboratory,
More informationAccelerated Weathering: Performance Testing of Polymer Matrix Composites
DEPC-MN 47 Accelerated Weathering: Performance Testing of Polymer Matrix Composites Summary Polymer matrix composites (PMCs) are increasingly being used in a wide range of engineering applications, such
More informationCHEM-C2410: Materials Science from Microstructures to Properties Composites: basic principles
CHEM-C2410: Materials Science from Microstructures to Properties Composites: basic principles Mark Hughes 14 th March 2017 Today s learning outcomes To understand the role of reinforcement, matrix and
More informationMSC Elastomers Seminar Some Things About Elastomers
MSC Elastomers Seminar Some Things About Elastomers Kurt Miller, Axel Products, Inc. www.axelproducts.com Visit us at: axelproducts.com 2 Your Presenter Kurt Miller Founded Axel Products 1994 Instron Corporation,
More informationLINEAR AND NON-LINEAR VISCOELASTIC BEHAVIOUR OF BINDERS AND ASPHALTS
UNIVERSITY OF NOTTINGHAM SCHOOL OF CIVIL ENGINEERING LINEAR AND NON-LINEAR VISCOELASTIC BEHAVIOUR OF BINDERS AND ASPHALTS By Behzad Rahimzadeh, BSc, MSc, MIAT, MIHT Thesis submitted to the University of
More information