Pershing Gold Concludes 2016 Phase 1 Drilling Program and Shifts Focus to Pre-Feasibility Study and Restart of Relief Canyon

Transcription

1 Pershing Gold Concludes 216 Phase 1 Drilling Program and Shifts Focus to Pre-Feasibility Study and Restart of Relief Canyon LAKEWOOD, Colo., Jan 9, 217 (PR NEWSWIRE) Pershing Gold Corporation (NASDAQ:PGLC) (TSX: PGLC) (FWB:7PG1) ("Pershing Gold" or the "Company"), the emerging Nevada gold producer, today provides an update on the progress towards production at its Relief Canyon Mine in Pershing County, Nevada. With the recent volatility in the gold price, the economics for Relief Canyon remain strong as a low cost, low CAPEX project in comparison with our North American peers, stated Stephen D. Alfers, Pershing Gold President, CEO, and Executive Chairman. Early this year the Company plans to publish a third-party Pre-Feasibility Study on Relief Canyon. This study is expected to continue to bolster the confidence in the Relief Canyon project, Alfers explained. Additionally, we have completed the 216 Phase 1 Drilling Program at Relief Canyon, which successfully extended high-grade mineralization with step-out drilling to the west. We also report promising results with our Phase 2 drilling, south of Relief Canyon. We are currently evaluating the results of this drilling in consideration of follow up drilling programs. That said, our main focus will be re-starting the Relief Canyon mine, said Alfers. Pre-Feasibility Study and Progress Towards Production Pershing Gold is nearing the completion of the third-party Pre-Feasibility Study ( PFS ) on the Relief Canyon mine that it initiated earlier this year. The PFS will refine the underlying assumptions used in the 216 Preliminary Economic Assessment ( PEA ) on Relief Canyon, which is available on the Company s website at Mine Development Associates, McLelland Laboratories, Inc. and Kappes, Cassiday and Associates, all of Reno, NV, have been commissioned to complete the PFS. Pershing Gold expects the PFS to be published in early 217. The PFS is a key step to allow the Company to define reserves at Relief Canyon under Canadian National Instrument and is expected to provide a higher degree of confidence in the Relief Canyon project. Key components of the PFS include the following: Incorporation of a geotechnical pit slope evaluation completed by Golder Associates of Reno, NV. Evaluation of an updated resource model incorporating new exploration drilling. Detailed capital and operating cost comparison of contract versus self-mining. Detailed capital and operating cost comparison of truck stacking versus conveyor stacking of crushed and agglomerated ore on the leach pad. Incorporation of additional metallurgical testing to establish ore agglomeration parameters. Trade-off study of line versus generated electrical power. Additionally, the PFS will provide refined costs for all capital and operating expenses for the 1

2 restart of Relief Canyon. Permitting On December 22, 216, the Nevada Division of Environmental Protection ( NDEP )/Bureau of Mining Regulation and Reclamation Phase issued the Reclamation Permit for Phase I expansion of the Relief Canyon Mine. With the receipt of this permit, along with the Bureau of Land Management ( BLM ) approval of the Relief Canyon Mine Expansion announced in August of 216, Pershing Gold has received the principal permits to initiate the restart and expansion of the Relief Canyon Mine. Similar to the previously approved BLM Plan of Operation, the NDEP Reclamation Permit authorizes Pershing Gold to create 68.7 acres of surface disturbance on public and private land, expand and deepen the open-pit mine, construct a new waste rock storage area, and significantly increase the exploration drilling area to allow testing of high-priority targets around the existing pit. Other key items in the ongoing process of permitting the Relief Canyon Mine include water pollution control and air quality permits. On December 21, 216, NDEP issued a public notice stating that they had made the tentative decision to approve Pershing Gold s application to modify and renew the current Water Pollution Control Permit. With this announcement, NDEP started the 3-day public comment period for this permit. The comment period will end on January 2, 217. Pershing Gold anticipates that the NDEP will issue the Water Pollution Control Permit modification and renewal shortly thereafter. Pershing Gold is working closely with NDEP s Bureau of Air Pollution Control to finalize the air quality permitting process. The Company expects that NDEP will issue the air quality permits in the first quarter of Drilling Program Phase 1 Final Results Pershing Gold has received the final results from Phase 1 of its 216 Drilling Program (the Program ), listed in Table 1 below. A complete list of results received to date is available on our website at Results are reported in feet ( ft ) and meters ( m ), and in grams per tonne ( gpt ) and ounces per ton ( oz/ton ) of gold ( Au ) or silver ( Ag ). Notable intercepts from RC16-49 include: o RC16-49 including: 24.1 ft (7.3 m), 1.83 gpt,.53 oz/ton Au including: 5. ft (1.5 m), gpt,.47 oz/ton Au The Phase 1 Drilling Program was designed to extend the western boundary of economic mineralization at Relief Canyon. RC16-49 continues to confirm that significant portions of the western margin of the mineral zones remain open to the west. RC16-49 is a 55 ft (167.6 m) offset to RC and a 29 ft (88.4 m) offset to RC The intercept in RC includes eight zones totaling ft (5.7 m) with an average grade of gpt,.46 oz/ton Au, and 23.5 gpt,.7 oz/ton Ag that the Company reported on September 9, 216. A plan view including these drill holes is shown below in Figure 1. 2

3 The Phase 1 drilling successfully expanded the North target area resource to the west and southwest where it remains open. This drilling continued to support the dominance of relatively low angle structural controls and continuity of mineralization and grade down dip. The Lower and Jasperoid Zones continue to produce high grades of gold with very good cyanide soluble results at depths to >9 ft (274 m). Table 1: Phase 1 Results Drill From To Width gpt oz/ton gpt Hole feet gold gold silver RC *True width is greater or equal to 9% of the intercept width. oz/ton silver Phase 1a Drilling Program The Company is now evaluating results from the 15,164 ft (4,622 m) of core drilling in the 216 Drilling Programs to follow-up on the successes there. This Phase 1a Program and other follow up programs could include step-out drilling to continue following the mineralization from Relief Canyon down dip to the west and southwest as well as infill drilling to expand the current economic pit limit at Relief Canyon. Geologic modeling of the higher grades encountered in the area of RC is currently in progress with additional drilling under consideration for 217. Phase 2 Drilling Program Pershing Gold has initiated Phase 2 of its 216 Drilling Program. Phase 2 is focused on extending mineralization south of the South Pit and the Lightbulb Pit, as well as on discovering satellite deposits that could be processed at the existing heap leach and ADR facilities at Relief Canyon. Table 2: Phase 2 Results Drill From To Width gpt oz/ton gpt Hole feet gold gold silver RC RC RC *True width is greater or equal to 9% of the intercept width. oz/ton silver.35.6 Phase 2 drilling at Pershing Gold Corporation s Relief Canyon Mine has identified potential mineable grade intervals of gold in drill hole RC with 1.1 ft (3.14 m) intervals averaging 1.13 gpt,.33 oz/ton Au, and 12.2 ft (3.7 m) at.343 gpt,.1 oz/ton Au. The Company is encouraged by the two intervals in hole RC because they occur along the 3

4 contact of the South Humboldt Thrust where deformed siliciclastics of the Grass Valley Formation are in thrust contact with the underlying carbonates of the Cane Springs Formation. Both of these intervals are found along altered gabbro contacts, which are illustrated in Figure 2 below. Figure 1 These structural contacts are key elements controlling the distribution of gold in the resource at Relief Canyon. Surface geological mapping and resistivity psuedosections indicate the intercepts in drill hole RC are located along a steepened thrust ramp. The depth to the South Humboldt Thrust shallows and flattens to the northeast as noted in Section 17-1 in Figure 2 below. Another key element to potential for resource growth at Relief Canyon is the 4

5 presence of a strong N4W structural corridor that cuts through the southeast extension target area. This N4W structural corridor is a significant structural control on gold at the Relief Canyon project. The Phase 2 drilling program is wide spaced, with the drill hole spacing averaging from 5 to 1,2 ft (152 to 366 m). This drilling is testing coincident geological, geochemical, and geophysical targets south and southeast of the old Relief Canyon Mine pits. The great majority of this highly prospective area has not previously been drilled. Phase 2 drilling completed to date has vectored toward the Southeast Extension target area (Figure 1). Figure 2 About Pershing Gold Corporation Pershing Gold is an emerging gold producer whose primary asset is the Relief Canyon Mine in Pershing County, Nevada. Relief Canyon includes three historic open-pit mines and a state-ofthe-art, fully permitted and constructed heap-leach processing facility. Pershing Gold is currently permitted to resume mining at Relief Canyon under the existing Plan of Operations. Pershing Gold's landholdings cover approximately 25, acres that include the Relief Canyon Mine asset and lands surrounding the mine in all directions. This land package provides Pershing Gold with the opportunity to expand the Relief Canyon Mine deposit and to explore and make new discoveries on nearby lands. Pershing Gold is listed on the NASDAQ Global Market and the Toronto Stock Exchange under the symbol PGLC and on the Frankfurt Stock Exchange under the symbol 7PG1. 5

6 Scientific and Technical Data All scientific and technical information in this press release has been reviewed and approved by Larry L. Hillesland, Certified Professional Geologist #1172, who is a Qualified Person under the definitions established by Canadian National Instrument Drill core at Relief Canyon is boxed and sealed at the drill rig and moved to the Relief Canyon logging and sample preparation facilities by trained personnel. The core is logged and split down the center using a typical table-fed circular rock saw. One half of the core is sent for assay to McClelland Laboratories, Inc.of Sparks, Nevada, while the other half is returned to the core box and stored at Relief Canyon in a secure, fenced-off, area. Pershing Gold Corporation QA/QC includes the regular use of blanks, standards, and duplicate samples. Legal Notice and Safe Harbor Statement This press release contains "forward-looking statements" within the meaning of the safe harbor provisions of the U.S. Private Securities Litigation Reform Act of 1995 and applicable Canadian securities laws. All statements, other than statements of historical fact, are "forward-looking statements," including the timing for the release of a Pre-Feasibility Study on the Relief Canyon mine and the expected contents and results of that study; the interpretation of Phase 1 results including confirmation that the deposit remains open to the west and southwest; the timing of of the issuance of the Water Pollution Control Permit modification and air quality permits; Although the Company's management believes that such forward-looking statements are reasonable, it cannot guarantee that such expectations are, or will be, correct. These forwardlooking statements involve a number of risks and uncertainties, which could cause the Company's future results to differ materially from those anticipated. Potential risks and uncertainties include, among others, interpretations or reinterpretations of geologic information, unfavorable exploration results, inability to obtain permits required for future exploration, development or production, general economic conditions and conditions affecting the industries in which the Company operates; the uncertainty of regulatory requirements and approvals; and fluctuating mineral and commodity prices. Additional information regarding the factors that may cause actual results to differ materially from these forward-looking statements is available in the Company's filings with the Securities and Exchange Commission, including the Annual Report on Form 1-K for the year ended December 31, 215, and on SEDAR at The Company assumes no obligation to update any of the information contained or referenced in this press release. Contact Information For more information, please contact: Stephen Alfers, Executive Chairman, President and CEO Jack Perkins, Vice President, Investor Relations investors@pershinggold.com 6