Supporting Information
|
|
- Erica Newton
- 5 years ago
- Views:
Transcription
1 Supporting Information Metal-Free Synthesis of C-4 Substituted Pyridine Derivatives Using Pyridine-boryl Radicals via a Radical Addition/Coupling Mechanism: A Combined Computational and Experimental Study Guoqiang Wang, a Jia Cao, a,c Liuzhou Gao, a Wenxin Chen, b Wenhao Huang, b Xu Cheng b,d,* and Shuhua Li a,* a Key Laboratory of Mesoscopic Chemistry of Ministry of Education, Institute of Theoretical and Computational Chemistry, School of Chemistry and Chemical Engineering, Nanjing University, Nanjing , P. R. China b Institute of Chemistry and Biomedical Sciences, Jiangsu Key Laboratory of Advanced Organic Material, School of Chemistry and Chemical Engineering, Nanjing University , P. R. China c College of Chemistry and Chemical engineering, Yan an University, Yan an , P. R. China d State Key Laboratory of Elemento-organic Chemistry, Nankai University, P. R. China s: shuhua@nju.edu.cn, chengxu@nju.edu.cn Table of Contents CONTENTS 1. Computational Investigations... S2 2. Experimental Studies on Substrare Scopes... S9 3. Experimental Studies on the Mechanism... S12 4. Spectroscopic Characterization of the 4-Substituted Pyridines... S18 5. NMR Spectra... S50 6. Cartesian Coordinates and Energies of the Optimized Structures... S References... S142 S1
2 1. Computational Investigations 1.2 Computational Details All calculations were performed with the Gaussian 09 package. [1] Geometries of all stationary points were fully optimized and characterized by vibrational frequency calculations at the M06-2X [2] /6-31G(d,p) level of theory. To get more accurate energies, we performed single-point energy calculations for all the species at the M06-2X/cc-pVTZ level. The calculated gas-phase Gibbs free energies refer to K and 1 atm. A broken-symmetry guess was used for calculations on open-shell systems. For each transition state, the intrinsic reaction coordinate (IRC) [3] analysis was performed to verify whether the transition state truly connects the reactant and the product. The solvent effect was treated with the polarizable continuum model (PCM). [4] In calculating the free energies for species in the benzene solvent, we have used the method developed by Whitesides et al. [5] to calculate the entropic contributions. This method was designed to better describe the suppression of the translational entropy upon moving from gas phase to a solvent for each species. [6] Activation free energy barriers here are defined as the free energy difference between the transition state and the lowest-energy stationary point before it in the reaction pathways. 1.2 Spin Density Calculations on the Pyridine-Boryl Radical The calculated spin density distribution on 1 is shown in Figure S1. One can see that the spin density is mainly localized at C4 (0.448), C2 (0.218), and N1 (0.139), and only a small spin density on B (0.048). This distribution of spin density is mainly S2
3 due to the resonance stabilization effect of the pyridinyl group. Carbon radical character is dominant in 1, which indicates that radical 1 may act as a carbon radical for the development of other new reactions, in particular reactions that lead to the synthesis of pyridine derivatives via the radical carbon-carbon coupling reactions. Figure S1. DFT-optimized structure and the calculated spin density in the pyridine-boryl radical Theoretical Investigations on Possible Substrates for Radical C-C Coupling Reactions Before verifying our hypothesis, we performed calculations to investigate the possibility for the addition of the boryl radical from radical 1 to other substrates for subsequent radical coupling reactions. As shown in Scheme S1, the addition of the boryl radical from radical 1 to 2-cyclohexenone, benzaldehyde and N-phenyl-1-(p-tolyl) methanimine were only endothermic by 2.2, 0.5 and 3.4 kcal/mol, respectively. These results indicate that the generation of new radicals with above mentioned substrates is feasible. In the following studies, the reaction between radical 1 and 2-cyclohexenone was selected as the model reaction to investigate the reactivity of the pyridine-boryl radical 1 in radical C-C coupling reactions. S3
4 Scheme S1. Thermodynamical calculations for the reactions between 1 and some potential substrates (kcal/mol, in gas phase). 1.4 Theoretical Investigations on Dimerization of the Pyridine-boryl Radical The homo-coupling reaction of the radical 1 may generate three possible C-C coupling intermediates (IntC4-C4, IntC4-C4, and IntC2-C4), as listed in Scheme S2 and Figure S2. Although the formation of these three dimers are exothermic by 2.9, 4.6, and 3.7 kcal/ml, respectively, the corresponding barrier of these processes are about only kcal/mol, suggesting that the homo-coupling reactions of radical 1 are all reversible. Thus, the radical 1 may be considered as a persistent radical for subsequent radical cross-coupling reactions. The existence of the dimeric species of 1 was further verified by 1 H NMR and HRMS analysis (see experimental section, Figure S8). S4
5 Scheme S2. Possible pathways for the dimerization of pyridine-boryl radical (1). Figure S2. Computed Gibbs free energy (in kcal/mol) profile for the homo-coupling reaction of the pyridine-boryl radical 1 in the solvent (benzene). 1.5 Comparison between Radical C-C and C-B Coupling Reactions As shown in Figures S3 and S4, in addition to the radical C-C coupling pathway (Figure S3a), the radical coupling reaction between 1 and Int2 can also generate a C-B coupling intermediate (Int6) via TS5, with a barrier of 13.7 kcal/mol (Figure S3b), which is 2.2 kcal/mol higher than that of the C-C coupling transition state (TS3). The generation of Int6 is only exothermic by 17.0 kcal/mol (with respect to the radical 1 and reactant 2b). Hence, the formation of the C-B coupling product is less favorable both thermodynamically and kinetically. These results are consistent with the observed fact that only the C-C coupling products were detected in the following experimental sections. S5
6 Figure S3. Computed Gibbs free energy (in kcal/mol) profile for the reaction of the pyridine-boryl radical (1) and 2-cyclohexenone (2b) in the solvent (benzene) along C-C radical coupling pathway (a) and the C-B radical coupling pathway (b). Figure S4. The optimized transition state and the product involved in the C-B coupling reaction. Distances are in Å 1.6 Homo-coupling of Enone-B radical S6
7 Figure S5. Computed Gibbs free energy (in kcal/mol) profile for the homocoupling of enone-boryl radical (Int1) in the solvent (benzene). As shown in Figure S5, the homo-coupling of enone-boryl radical is exothermic by 37.7 kcal/mol (with respect to separated 1 and 2b). However, no homo-coupling product of Int2 was detected, which may be attributed by the persistent radical effect. [7] As shown in Eq. (a), the generation of the new radical Int2 is endothermic by 1.8 kcal/mol, which suggests that the concentration of the radical 1 is much higher that of Int2. Thus, the formation of cross-coupling product of 1 and Int2 is dominant in our system , 2- and 1, 4-Addition of Pyridine-boryl Radical to the 2-Cyclohexenone S7
8 Figure S6. Computed Gibbs free energy (in kcal/mol) profile for the direct addition reaction of the pyridine-boryl radical (1) to 2-cyclohexenone (2b) in the solvent (benzene) along 1, 4-addition pathway (a) and the 1, 2-addition pathway (b). The direct 1, 2- or 1, 4-addition of pyridine-boryl radical (1) to enone 2b could also generate the same C4-substituted pyridines. As shown in Figure S6, the relative free energy of Int8 and Int9 is 22.6 and 50.0 kcal/mol higher than that of separated 1 and 2b, respectively, suggesting that the 1,4- or 1,2-addition of 1 to 2-cyclohexenone (2b) is unlikely to occur. S8
9 2. Experimental Studies on Substrate Scopes 2.1 General Information All reactions were carried out under nitrogen atmosphere. Anhydrous CH3CN, CH2Cl2, toluene, THF and methyl tert-butyl ether (MTBE) were purchased from Acros and used as received. Other solvents were dried by distillation over the appropriate drying reagents. All NMR spectra were recorded on a Bruker AVANCE Ⅲ 400 spectrometer at room temperature with CDCl3 as the solvent and TMS as the internal standard. Chemical shifts (δ) were reported in ppm with respect to the residue solvent peak. Coupling constant (J) were reported in Hert (Hz), abbreviations for signal couplings are indicated as follows: s, singlet; d, doublet; t, triplet; m, multiplet. Infrared spectra were recorded on a ThermoFisher Nicolet is5 FTIR using neat thin film technique. High-resolution mass spectra (HRMS) were recorded on Thermo Quest Finnigan LCQDECA system equipped with an ESI ionization source. Enones 2l, [8] 2m and 2o, [9] 2n, [10] 2h, [11] 2j, [12] 2A, [13] 2p, [14] 2r, [15] 2t and 2u, [16] 3-(methylthio)isonicotinonitrile, [17] and 6, [18] were synthesized according to the reported procedure. All other commercially available reagents were used without further purification. 2.2 Optimization Studies Using aryl Aldehydes as the Coupling Partner Table S1 Optimization studies. a S9
10 Entry t (h) T ( C) Benzaldehyde (equiv.) B 2(pin) 2 (equiv.) Yield b % % % % % % % % % (54%) c a Reaction conditions: 4-cyanopyridine (0.2 mmol), B 2(pin) 2 ( mmol), MTBE (1.0 ml), benzaldehyde ( mmol). b Yields were determined by 1 H NMR analysis of the crude reaction mixture with CH 3NO 2 as an internal standard. c Isolated yield. 2.3 General Procedures for the Synthesis of 4-Substituted Pyridines A: Using enones, arylimines, alkyn-ketone, aliphatic aldehyde or ketone as the coupling partner S10
11 A sealed reaction tube charged with a magnetic stir bar, B2(pin)2 (0.24 mmol, 1.2 equiv), 4-cyanopyridine (0.3 mmol, 1.5 equiv), MTBE (1 ml) and the corresponding coupling partner (2, 11, 13, 15, 17) was placed in a heated oil bath (25-70 C). After hours the reaction was cooled and quenched with 2M Na2CO3 aqueous solution (3 ml). The reaction tube was stirred under air for another 15 minutes. 10 ml of brine was added to the reaction mixture and the aqueous layer was extracted with EtOAc (3 10mL). The combined organic layer was dried over Na2SO4 and then concentrated in vacuo to afford the crude product. This crude material was purified by preparative TLC or chromatography on silca gel to afford the desired 4-substituted pyridines. B: Using Aryl Aldehydes and Ketone as the Coupling Partner A sealed reaction tube charged with a magnetic stir bar, B2(pin)2 (0.48 mmol, 2.4 equiv), 4-cyanopyridine (0.2 mmol, 1.0 equiv), MTBE (1 ml) and the corresponding aryl aldehydes or ketone (9) was placed in a heated oil bath (90 C). After 24 hours the reaction was cooled and the reaction was quenched by 2M Na2CO3 aqueous solution (3 ml). The mixture was stirred under air for another 15 minutes. 10 ml of brine was added to the reaction mixture and the product was extracted with EtOAc (3 10mL). The organic layer was collected, dried over Na2SO4, and then concentrated in vacuo to afford the crude product. This crude material was purified by preparative TLC to afford the desired 4-substituted pyridines. The yields were referred to 4-cyanopyridine. S11
12 2.4 Effect of Substituents on the Pyridine Ring The effect of substituents on the pyridine ring was investigated, as shown in Scheme S3a. 4-cyanopyridines bearing substituents such as F, Cl, and methyl, at C-3 position could afford the corresponding 1, 4-addition products (3v, 3w, and 3x) in moderate yield. However, for the 4-cyanopyridines bearing a substituent at C-2 position, no product was detected, suggesting that the 2-substitued-4-cyanopyridine failed to activate the B-B bond of B2(pin)2 to generate the corresponding boryl radical, which is mainly due to the steric effect of the substituents at C-2 position (Scheme S3b). Scheme S3. Reactions of 2-cyclohepten-1-one (2c) with the substituted 4-cycano pyridines. 3. Experimental Studies on the Mechanism 3.1 Detecting the Boron-enolate Intermediate by HRMS Analysis In order to verify the involvement of the boron-enolate intermedate under the proposed radical addition/coupling addition conditions, HRMS analysis was S12
13 performed to detect the possible intermediate. Experimental procedure: A sealed reaction tube was charged with a magnetic stir bar, B2(pin)2 (61.9 mg, 0.24 mmol, 1.2 equiv), 4-cyanopyridine (31.2 mg, 0.3 mmol, 1.5 equiv), MTBE (1 ml) and cyclohept-2-en-1-one (2c) (24.7 μl, 0.2 mmol, 1.0 equiv.). The mixture was stirred at 25 C for 12h, after which, the ESI-MS analysis of the crude reaction mixture was carried out immediately. The mass for an aromatized boron-enolate intermediate (Int3 ) is C18H26BNNaO3 + [M+Na] + calc , found (Figure S7). However, the direct detection of Int3-like structure was not successful, possibly due to its rapid aromatization. Figure S7. Mass spectrum of the crude reaction mixture of 4-cycanopyridine, B2(pin)2 and cyclohept-2-en-1-one. 3.2 Trapping the boron-enolate with Cyano Group S13
14 Experimental procedure: The trapping of B-enolate intermediate with a cyano group was carried out following general procedure A using the cyclohept-2-en-1-one (2c) (24.7 μl, 0.2 mmol, 1.0 equiv.), 3, 4-dicyanopyridine (39.5 mg, 0.3 mmol, 1.5 equiv.), B2(pin)2 (61.9 mg, 0.24 mmol, 1.2 equiv) and MTBE (1 ml) at 70 C. After 24 hours, following the described workup procedure, the reaction mixture was purified by preparative TLC (PE/EtOAc = 1:2) to afford compound 5 with fused ring scaffold (8 mg, 19% yield), indicating that an intramolecular trapping of the boron-enolate via a nucleophilic addition reaction occurred. The computed relative free energy of imine-isomer 5 or 5 is higher about 14 kcal/mol than that of enamine-isomer 5, suggesting that the generation of 5 is favorable (See Scheme S4). The 13 C NMR spectrum in a CDCl3 solution displays only five peaks at upfield (and with eight peaks at downfield), indicating that 5 is the predominant species. Scheme S4. The calculated relative free energy change for imine-enamine tautomerism of 5 (with respect to 5 ) 5: Yellowish-brown solid, decomposed at >200 o C. 1 H NMR (400 MHz, CDCl3) S14
15 δ 8.85 (s, 1H), 8.65 (d, J = 5.1 Hz, 1H), 7.41 (d, J = 5.1 Hz, 1H), 3.62 (dd, J = 12.1, 2.4 Hz, 1H), (m, 1H), 2.56 (dd, J = 13.9, 7.2 Hz, 1H), 2.45 (dd, J = 13.4, 3.3 Hz, 1H), 2.20 (d, J = 13.8 Hz, 1H), (m, 1H), (m, 1H), 1.46 (q, J = 12.8 Hz, 1H), 1.08 (qd, J = 13.0, 3.0 Hz, 1H); 13 C NMR (100 MHz, CDCl3) δ , 155.4, 150.0, 142.3, 133.5, 119.8, 113.9, 47.6, 45.5, 34.4, 31.8, 24.6; IR (film): 3363, 3294, 1752, 1630, 1498, 1426, 953, 842 cm 1 ; HRMS (ESI-TOF) calculated for C13H15N2O [M+H] , found Intermediacy of Radical in Carbon-Carbon Coupling The involvement of a radical intermediate was probed with the rigid cycloprop[a]inden-6(1h)-one 6 as radical clock. In the presence of 3-chloro-4-cycano pyridine and B2(pin)2 at 70 o C, the product 7 is generated from the opening of fused cyclopropyl group in 13% yield. This result also supported the involvement of radical intermediate in the proposed pathways. Experimental procedure: Following general procedure A, a mixture of 6 (28.9 mg, 0.2 mmol, 1.0 equiv.), 3-chloro-4-cyano pyridine (42.4 mg, 0.3 mmol, 1.5 equiv.), B2(pin)2 (61.9 mg, 0.24 mmol, 1.2 equiv) and MTBE (1 ml) was stirred at 70 C. After 24 hours, with the described workup procedure, the reaction mixture was S15
16 purified by preparative TLC on silica gel (PE/EtOAc = 5:1) to afford compound 7 (6.7 mg, 13% yield) (and the 1, 2-addition product 8 was also obtained in 15% yield). 7: off-white solid, C. 1 H NMR (400 MHz, CDCl3) δ 8.65 (s, 1H), 8.36 (d, J = 5.0 Hz, 1H), 8.16 (dd, J = 7.7, 1.2 Hz, 1H), 7.50 (td, J = 7.5, 1.4 Hz, 1H), 7.43 (t, J = 7.5 Hz, 1H), 6.96 (d, J = 7.6 Hz, 1H), 6.75 (d, J = 5.0 Hz, 1H), 4.81 (t, J = 6.4 Hz, 1H), (m, 2H), (m, 1H), (m, 1H); 13 C NMR (100 MHz, CDCl3) δ 197.4, 150.3, 149.9, 148.3, 143.6, 134.4, 133.5, 132.4, 129.4, 128.2, 127.9, 124.8, 41.6, 36.3, 28.9; IR (film): 2923, 1686, 1598, 1398, 1033, 913, 840 cm 1 ; HRMS (ESI-TOF) calculated for C15H13ClNO [M+H] , found : off-white solid, mp C. 1 H NMR (400 MHz, CDCl3) δ 8.53 (s, 1H), 8.42 (s, 1H), 7.40 (d, J = 4.4 Hz, 1H), 7.34 (d, J = 7.5 Hz, 1H), 7.27 (td, J = 7.4, 1.3 Hz, 1H), 7.20 (t, J = 7.3 Hz, 1H), 7.05 (d, J = 7.5 Hz, 1H), 3.11 (brs, 1H), 2.66 (ddd, J = 7.7, 5.9, 3.7 Hz, 1H), 2.26 (ddd, J = 8.2, 5.9, 4.1 Hz, 1H), 1.25 (td, J = 7.9, 4.9 Hz, 1H), 0.93 (q, J = 4.0 Hz, 1H); 13 C NMR (100 MHz, CDCl3) δ 151.8, 151.2, 148.2, 147.4, 143.3, 129.1, 127.2, 125.9, 124.3, 122.8, 84.8, 27.7, 25.6, 19.9; (one carbon was not observed due to the incidental equivalence) IR (film): 3220, 3070, 3042, 1585, 1399, 1044, 912, 840 cm 1 ; HRMS (ESI-TOF) calculated for C15H13ClNO [M+H] , found Spectroscopic Study of the Dimerization of Pyridine-boryl Radical As shown in Scheme S5, three possible dimeric isomers may be generated via the dimerization of pyridine-boryl radical. Since these species are highly moisture and air sensitive, 1 H NMR and HRMS analysis were carried out to detect the presence of S16
17 these intermediates. Scheme S5. DFT-optimized three possible isomers of the homo-coupling of pyridine-boryl radical. Experimental procedure: Bis(pinacolato)diboron (30.5 mg, 0.12 mmol) and 4-cycanopyridine (15.7 mg, 0.15 mmol) were mixed in 0.5 ml THF-d8 in a NMR tube. The NMR tube was sealed with a cap before removal from the glove box. The mixture was allowed to heat for 12 h at 40 C, 1 H NMR analysis was carried out to determine the generation of the dimerization product. As shown in Figure S8, the peaks in the 1 H NMR spectrum of the 4-cyanopyridine/B2(pin)2 reaction mixture are significantly different from those of 4-cyanopyridine. The signals at ppm may be attributed to the 1,2 or (and) 1,4-dihydropyridine moiety, which are similar to the previously reported peaks of the 1,2 or 1,4-dearomatized pyridine. [19, 20] In addition, the mass for dimeric isomers IntC4-C4 (or IntC2-C2, IntC2-C4) is C24H33B2N4O4 + [M+Na] + calc , found These results suggested that the dimeric species of pyridine-boryl radical was formed in the mixture of 4-cyanopyridine and B2(pin)2. The direct observation of dimeric isomers is consistent with our DFT calculations. S17
18 Figure S8. Up: 1 H NMR spectrum of 4-cyanopyridine in THF-d8; Down: 1 H NMR spectrum of the reaction mixture of 4-cyanopyridine and B2(pin)2 in THF-d8. 4. Spectroscopic Characterization of the Corresponding 4-substituted Pyridines 4.1: Using enones as the coupling partner 3a and 4a: Prepared following general procedure A using 2a (20.2 μl, 0.2 mmol, 1.0 equiv.), 4-cyanopyridine (31.2 mg, 0.3 mmol, 1.5 equiv.), B2(pin)2 (61.9 mg, 0.24 mmol, 1.2 equiv) and MTBE (1 ml) at 70 C. After 24 hours, following the described workup procedure, the reaction mixture was purified by preparative TLC on silica gel (PE/EtOAc = 1:1) to afford the two pyridines (15 mg, 43% combined yield, 3a/4a = 1.8:1). And the resulting mixture was further isolated with preparative TLC on silica gel (PE/isopropanol = 6:1) to afford 3a and 4a separately. 3a: Colorless oil; 1 H NMR (400 MHz, CDCl3) δ 8.57 (d, J = 5.5 Hz, 2H), 7.21 (dd, J = 4.7, 1.5 Hz, 2H), (m, 2H), (m, 2H), (m, 2H), 1.39 (s, 3H); 13 C NMR (100 MHz, CDCl3) δ 217.2, 157.7, 150.3, 121.2, 51.6, 43.9, S18
19 36.8, 35.5, 28.9; IR (film): 2961, 1743, 1597, 1409, 994, 823 cm 1 ; HRMS (ESI-TOF) calculated for C11H14NO [M+H] , found a: Gum; 1 H NMR (400 MHz, CDCl3) δ 8.50 (d, J = 5.7 Hz, 2H), 7.37 (d, J = 5.7 Hz, 2H), 5.42 (s, 1H), 2.95 (brs, 1H), (m, 1H), (m, 1H), (m, 2H), 1.86 (s, 3H); 13 C NMR (100 MHz, CDCl3) δ 157.6, 149.5, 147.3, 130.3, 120.8, 86.7, 43.2, 36.0, 17.1; IR (film): 3218, 2966, 2937, 1600, 1411, 1240, 1065, 1003, 825 cm 1 ; HRMS (ESI-TOF) calculated for C11H14NO [M+H] , found b and 4b: Prepared following general procedure A using 2b (20 μl, 0.2 mmol, 1.0 equiv.), 4-cyanopyridine (31.2 mg, 0.3 mmol, 1.5 equiv.), B2(pin)2 (61.9 mg, 0.24 mmol, 1.2 equiv) and MTBE (1 ml) at 70 C. After 24 hours, following the described workup procedure, the reaction mixture was purified by preparative TLC (PE/EtOAc = 1:1) to afford the two pyridines (24.5 mg, 70% combined yield, 3b/4b=3.7:1). And the resulting mixture was further isolated by preparative TLC on silica gel (PE/isopropanol = 6:1) to afford 3b and 4b separately. 3b: Gum; 1 H NMR (400 MHz, CDCl3) δ 8.53 (s, 2H), 7.15 (d, J = 4.4 Hz, 2H), (m, 1H), (m, 4H), (m, 2H), (m, 2H); 13 C NMR (100 MHz, CDCl3) δ 209.9, 153.6, 150.2, 122.4, 47.9, 44.0, 41.3, 32.1, 25.5; IR (film): 2939, 2866, 1714, 1600, 1416, 993, 822 cm 1 ; HRMS (ESI-TOF) calculated for C11H14NO [M+H] , found b: White solid, mp C; 1 H NMR (400 MHz, CDCl3) δ 8.53 (d, J = 2.5 S19
20 Hz, 2H), 7.41 (d, J = 3.6 Hz, 2H), (m, 1H), 5.72 (d, J = 10.0 Hz, 1H), 2.63 (brs, 1H), (m, 2H), (m, 1H), (m, 2H), (m, 1H); 13 C NMR (100 MHz, CDCl3) δ 157.5, 149.6, 132.4, 130.9, 121.1, 71.7, 39.4, 25.2, 19.1; IR (film): 3199, 3022, 2934, 1601, 1064, 1411, 982, 820 cm 1 ; HRMS (ESI-TOF) calculated for C11H14NO [M+H] , found c: Prepared following general procedure A using 2c (24.7 μl, 0.2 mmol, 1.0 equiv.), 4-cyanopyridine (31.2 mg, 0.3 mmol, 1.5 equiv.), B2(pin)2 (61.9 mg, 0.24 mmol, 1.2 equiv) and MTBE (1 ml) at 70 C. After 36 hours, following the described workup procedure, the reaction mixture was purified by preparative TLC on silica gel (PE/EtOAc = 1:1) to afford the pyridine 3c as the sole product (23.3 mg, 62% yield). 3c: Colorless oil; 1 H NMR (400 MHz, CDCl3) δ 8.51 (d, J = 5.9 Hz, 2H), 7.10 (d, J = 6.0 Hz, 2H), (m, 2H), (m, 3H), (m, 3H), (m, 2H), (m, 1H); 13 C NMR (100 MHz, CDCl3) δ 212.5, 155.8, 150.3, 122.2, 50.3, 44.2, 42.3, 38.6, 29.3, 24.3; IR (film): 2928, 2856, 1698, 1596, 1414, 993, 817 cm 1 ; HRMS (ESI-TOF) calculated for C12H16NO [M+H] , found d and 4d: Prepared following general procedure A using 2d (17.8 μl, 0.2 mmol, 1.0 equiv.), 4-cyanopyridine (31.2 mg, 0.3 mmol, 1.5 equiv.), B2(pin)2 (61.9 mg, 0.24 S20
21 mmol, 1.2 equiv) and MTBE (1 ml) at 70 C. After 24 hours, following the described workup procedure, the reaction mixture was purified by preparative TLC (PE/EtOAc = 1:1) to afford the two pyridines (12.9 mg, 40% combined yield, 3d/4d=1.2:1). And the resulting mixture was further purified by preparative TLC on silica gel (PE/isopropanol = 6:1) to afford 3d and 4d separately. 3d: Gum; 1 H NMR (400 MHz, CDCl3) δ 8.56 (d, J = 6.0 Hz, 2H), 7.18 (d, J = 6.1 Hz, 2H), (m, 1H), (m, 1H), (m, 2H), (m, 2H), (m, 1H); 13 C NMR (100 MHz, CDCl3) δ 216.9, 152.6, 150.2, 122.5, 45.0, 41.8, 38.8, 30.7; IR (film): 2994, 1742, 1415, 993, 820 cm 1 ; HRMS (ESI-TOF) calculated for C10H12NO [M+H] , found d: White solid, mp C; 1 H NMR (400 MHz, CDCl3) δ 8.51 (d, J = 6.1 Hz, 2H), 7.35 (d, J = 6.2 Hz, 2H), 6.16 (dt, J = 5.2, 2.4 Hz, 1H), 5.80 (m, J = 5.2, 2.4 Hz, 1H), 2.95 (brs, 1H), (m, 1H), (m, 1H), (m, 2H); 13 C NMR (100 MHz, CDCl3) δ 156.5, 149.8, 136.2, 136.1, 120.5, 86.4, 42.4, 31.9; IR (film): 3218, 2965, 2935, 1600, 1411, 1240, 1003, 824 cm 1 ; HRMS (ESI-TOF) calculated for C10H12NO [M+H] , found e and 4e: Prepared following general procedure A using 2e (23.2 μl, 0.2 mmol, 1.0 equiv.), 4-cyanopyridine (31.2 mg, 0.3 mmol, 1.5 equiv.), B2(pin)2 (61.9 mg, 0.24 mmol, 1.2 equiv) and MTBE (1 ml) at 70 C. After 36 hours, following the described workup procedure, the reaction mixture was purified by preparative TLC (PE/EtOAc = 1:1) to afford the two pyridines (32.5 mg, 86% combined yield, 3e/4e=1.9:1). And the resulting mixture were further purified by preparative TLC on silica gel S21
22 (PE/isopropanol = 6:1) to afford 3e and 4e separately. 3e: Colorless oil; 1 H NMR (400 MHz, CDCl3) δ 8.48 (d, J = 4.9 Hz, 2H), 7.19 (d, J = 5.4 Hz, 2H), 2.75 (d, J = 12.0 Hz,1H), 2.37 (d, J = 12.0 Hz, 1H), (m, 2H), (m, 1H), (m, 2H), (m, 1H), 1.24 (s, 3H); 13 C NMR (100 MHz, CDCl3) δ 210.5, 157.5, 150.1, 121.6, 52.4, 43.2, 40.9, 37.5, 29.4, 22.2; IR (film): 2958, 2871, 1711, 1616, 1410, 995, 820 cm 1 ; HRMS (ESI-TOF) calculated for C12H16NO [M+H] , found e: Gum; 1 H NMR (400 MHz, CDCl3) δ 8.53 (d, J = 4.4 Hz, 2H), 7.43 (d, J = 5.8 Hz, 2H), 5.44 (s, 1H), 2.77 (brs, 1H), (m, 2H), (m, 5H), (m, 2H); 13 C NMR (100 MHz, CDCl3) δ 159.1, 149.3, 140.8, 125.5, 121.5, 72.4, 39.1, 30.2, 24.2, 19.5; IR (film): 3201, 2934, 2866, 1616, 1424, 1080, 977, 824 cm 1 ; HRMS (ESI-TOF) calculated for C12H16NO [M+H] , found f and 4f: Prepared following general procedure A using 2f (30.5 μl, 0.2 mmol, 1.0 equiv.), 4-cyanopyridine (31.2 mg, 0.3 mmol, 1.5 equiv.), B2(pin)2 (61.9 mg, 0.24 mmol, 1.2 equiv) and MTBE (1 ml) at 70 C. After 36 hours, following the described workup procedure, the reaction mixture was purified by preparative TLC on silica gel (PE/EtOAc = 1:1) to afford the two pyridines (35.7 mg, 82% combined yield, 3f/4f=2.2:1). And the resulting mixture was further purified by preparative TLC on silica gel (PE/isopropanol = 6:1) to afford 3f and 4f separately. 3f: Colorless oil; 1 H NMR (400 MHz, CDCl3) δ 8.49 (dd, J = 4.9, 1.4 Hz, 2H), 7.30 (dd, J = 4.7, 1.6 Hz, 2H), 2.99 (d, J = 14.0 Hz 1H), 2.40 (dd, J = 14.0, 1.0 Hz, S22
23 1H), 2.24 (d, J = 13.2 Hz, 2H), 2.08 (d, J = 13.4 Hz, 1H), 1.94 (d, J = 14.3 Hz, 1H), 1.33 (s, 3H), 1.03 (s, 3H), 0.36 (s, 3H); 13 C NMR (100 MHz, CDCl3) δ 210.7, 157.9, 149.9, 121.8, 54.6, 51.2, 50.7, 42.9, 36.6, 34.8, 33.2, 28.7; IR (film): 2958, 2926, 1715, 1595, 1412, 995, 823 cm 1 ; HRMS (ESI-TOF) calculated for C14H20NO [M+H] , found f: Gum; 1 H NMR (400 MHz, CDCl3) δ 8.50 (dd, J = 4.6, 1.6 Hz, 2H), 7.35 (dd, J = 4.6, 1.6 Hz, 2H), 5.43 (s, 1H), 2.53 (brs, 1H), 1.95 (d, J = 17.4 Hz, 1H), (m, 5H), 1.60 (d, J = 14.3 Hz, 1H), 1.14 (s, 3H), 0.93 (s, 3H); 13 C NMR (100 MHz, CDCl3) δ 159.2, 149.6, 138.6, 124.3, 120.9, 73.5, 51.5, 44.6, 31.9, 30.8, 27.5, 24.5; IR (film): 3219, 2950, 2865, 1599, 1411, 1240, 1054, 1002, 831 cm 1 ; HRMS (ESI-TOF) calculated for C14H20NO [M+H] , found g and 4g: Prepared following general procedure A using 2g (27.1 μl, 0.2 mmol, 1.0 equiv.), 4-cyanopyridine (31.2 mg, 0.3 mmol, 1.5 equiv.), B2(pin)2 (61.9 mg, 0.24 mmol, 1.2 equiv) and MTBE (1 ml) at 70 C. After 36 hours, following the described workup procedure, the reaction mixture was purified by preparative TLC on silica gel (PE/EtOAc = 1:1) to afford the two pyridines (33.6 mg, 83% combined yield, 3g/4g=1:2.6). And the resulting mixture was further purified by preparative TLC on silica gel (PE/isopropanol = 4:1) to afford 3g and 4g separately. 3g: Colorless oil; 1 H NMR (400 MHz, CDCl3) δ 8.55 (d, J = 5.1 Hz, 2H), 7.08 (d, J = 5.5 Hz, 2H), (m, 2H), (m, 1H), (m, 2H), S23
24 (m, 2H), 1.03 (s, 3H), 0.91 (s, 3H); 13 C NMR (100 MHz, CDCl3) δ 210.5, 150.6, 149.6, 124.5, 52.8, 42.9, 40.7, 38.5, 34.0, 29.5, 20.0; IR (film): 2960, 2870, 1716, 1595, 1416, 1240, 994, 831 cm 1 ; HRMS (ESI-TOF) calculated for C13H18NO [M+H] , found g: White solid, mp C; 1 H NMR (400 MHz, CDCl3) δ 8.49 (dd, J = 4.6, 1.6 Hz, 2H), 7.38 (dd, J = 4.6, 1.6 Hz, 2H), 5.77 (d, J = 10.0 Hz, 1H), 5.54 (d, J = 10.0, 1H), 2.75 (brs, 1H), (m, 2H), (m, 1H), (m, 1H), 1.07 (s, 3H), 1.05 (s, 3H); 13 C NMR (101 MHz, CDCl3) δ 157.5, 149.6, 142.2, 128.4, 121.2, 71.8, 36.7, 33.5, 32.1, 29.9, 28.2; IR (film): 3206, 2954, 2864, 1600, 1411, 1244, 1050, 1001, 823 cm 1 ; HRMS (ESI-TOF) calculated for C13H18NO [M+H] , found h: Prepared following general procedure A using 2h (34.4 mg, 0.2 mmol, 1.0 equiv.), 4-cyanopyridine (31.2 mg, 0.3 mmol, 1.5 equiv.), B2(pin)2 (61.9 mg, 0.24 mmol, 1.2 equiv) and MTBE (1 ml) at 25 C. After 48 hours, following the described workup procedure, the reaction mixture was purified by preparative TLC (PE/EtOAc = 1:1) to afford the pyridine 3h as the sole product with trans configuration (26.6 mg, 53% yield). 3h: Colorless oil; 1 H NMR (400 MHz, CDCl3) δ 8.37 (d, J = 4.1 Hz, 2H), (m, 3H), 6.99 (d, J = 6.0 Hz, 2H), 6.90 (dd, J = 5.2, 3.2 Hz, 2H), 3.78 (d, J = 12.3 Hz, 1H), (m, 1H), (m, 2H), (m, 1H), S24
25 (m, 3H); 13 C NMR (100 MHz, CDCl3) δ 208.4, 152.7, 149.9, 136.0, 129.6, 128.5, 127.4, 123.2, 62.8, 51.9, 42.1, 34.0, 26.4; IR (film): 2932, 1758, 1596, 1417, 993, 823 cm 1 ; MS (ESI) exact mass calculated for C17H18NO [M+H] , found The relative stereochemistry between α- and β-position of 3h was assigned as a trans-configuration based on 2D NOESY spectra. 3i and 4i: Prepared following general procedure A using 2i (26.5 μl, 0.2 mmol, 1.0 equiv.), 4-cyanopyridine (31.2 mg, 0.3 mmol, 1.5 equiv.), B2(pin)2 (61.9 mg, 0.24 mmol, 1.2 equiv) and MTBE (1 ml) at 70 C. After 24 hours, following the described workup procedure, the reaction mixture was purified by preparative TLC on silica gel (PE/EtOAc = 1:1) to afford the two pyridines (21.9 mg, 54% combined yield, 3i/4i=1.6:1). And the resulting mixture was further purified by preparative TLC (PE/isopropanol = 6:1) to afford 3i (with trans configuration as predominant species, d.r.>10:1) and 4i separately. 3i: White solid, mp C; 1 H NMR (400 MHz, CDCl3) δ 8.47 (d, J = 4.8 Hz, 2H), 7.17 (d, J = 5.1 Hz, 2H), 3.10 (dd, J = 8.7, 4.3 Hz, 1H), (m, 1H), (m, 1H), (m, 1H), (m, 6H), (m, 2H), (m, 1H); 13 C NMR (100 MHz, CDCl3) δ 210.6, 154.1, 149.7, 123.6, 52.3, 44.1, 30.9, 28.4, 26.4, 25.6, 21.9; IR (film): 2930, 2857, 1707, 1597, 1416, 993, 816 S25
26 cm 1 ; HRMS (ESI-TOF) calculated for C13H18NO [M+H] , found The relative stereochemistry between α- and β-position of 3i was assigned as a trans-configuration based on 2D NOESY spectra. 4i: White solid, mp C; 1 H NMR (400 MHz, CDCl3) δ 8.52 (d, J = 6.3 Hz, 2H), 7.36 (d, J = 6.2 Hz, 2H), (m, 1H), 2.84 (brs, 1H), (m, 2H), (m, 1H), (m, 8H); 13 C NMR (100 MHz, CDCl3) δ 156.9, 149.6, 141.7, 123.2, 121.1, 76.6, 28.9, 25.5, 24.6, 23.1, 22.4; IR (film): 3207, 2928, 2855, 1600, 1411, 1024, 1064, 1002, 828 cm 1 ; HRMS (ESI-TOF) calculated for C13H18NO [M+H] , found j: Prepared following general procedure A using 2j (32.3 mg, 0.2 mmol, 1.0 equiv.), 4-cyanopyridine (31.2 mg, 0.3 mmol, 1.5 equiv.), B2(pin)2 (61.9 mg, 0.24 mmol, 1.2 equiv) and MTBE (1 ml) at 70 C. After 24 hours, following the described workup procedure, the reaction mixture was purified by preparative TLC on silica gel (PE/EtOAc = 1:1) to afford the pyridine 3j with trans configuration as predominant species (28.4 mg, 62% yield, trans/cis = 10:1). 3j: White solid, mp C; 1 H NMR (400 MHz, CDCl3) 1H NMR (400 MHz, CDCl3) δ 8.45 (d, J = 4.7 Hz, 2H), 7.18 (d, J = 5.4 Hz, 1.84H, trans), 7.10 (d, J = 5.1 S26
27 Hz, 0.17H, cis), (m, 1H), (m, 1H), (m, 1H), (m, 1H), (m, 5H), (m, 2H), (m, 4H); 13 C NMR (100 MHz, CDCl3) δ 211.9, 154.7, 149.8, 149.4, 123.7, 123.3, 57.0, 52.7, 45.5, 44.2, 33.9, 29.9, 28.7, 26.4, 26.2, 25.8, 25.8, 25.1, 21.9, 21.1, 20.8, 11.1, 11.1, 10.6; IR (film): 2929, 2857, 1693, 1596, 1413, 994, 815 cm 1 ; HRMS (ESI-TOF) calculated for C15H20NO [M+H] , found The relative stereochemistry between α- and β-position of 3j was assigned as a trans-configuration based on 2D NOESY spectra. 3k: Prepared following general procedure A using 2k (39.2 mg, 0.2 mmol, 1.0 equiv.), 4-cyanopyridine (31.2 mg, 0.3 mmol, 1.5 equiv.), B2(pin)2 (61.9 mg, 0.24 mmol, 1.2 equiv) and MTBE (1 ml) at 70 C. After 24 hours, following the described workup procedure, the reaction mixture was purified by preparative TLC on silica gel (n-pentane/etoac = 1:1) to afford the pyridine 3k as the sole product (31 mg, 59% yield). 3k: White solid, mp C; 1 H NMR (400 MHz, CDCl3) δ 8.51 (d, J = 5.8 Hz, 2H), 7.42 (d, J = 6.4 Hz, 2H), 6.14 (d, J = 16.1 Hz, 1H), 5.70 (d, J = 16.8 Hz, 1H), 3.19 (brs, 1H), 1.95 (t, J = 6.1 Hz, 2H), 1.68 (s, 3H), (m, 5H), (m, 2H), 0.96 (s, 3H), 0.95 (s, 3H); 13 C NMR (100 MHz, CDCl3) δ 156.9, S27
28 149.7, 139.7, 136.7, 129.4, 127.4, 120.8, 74.4, 39.6, 34.4, 32.9, 29.9, 29.1 (two C have the same chemical shift at 29.1 ppm), 21.6, 19.5; IR (film): 3181, 2924, 1600, 1412, 1063, 826 cm 1 ; HRMS (ESI-TOF) calculated for C18H26NO [M+H] , found l and 4l: Prepared following general procedure A using 2l (22 mg, 0.2 mmol, 1.0 equiv.), 4-cyanopyridine (31.2 mg, 0.3 mmol, 1.5 equiv.), B2(pin)2 (61.9 mg, 0.24 mmol, 1.2 equiv) and MTBE (1 ml) at 70 C. After 24 hours, following the described workup procedure, the reaction mixture was purified by preparative TLC on silica gel (PE/EtOAc = 2:1) to afford the two pyridines (23 mg, 60% combined yield, 3l/4l = 2.3:1). And the resulting mixture was further purified by preparative TLC on silica gel (PE/isopropanol = 7:1) to afford 3l and 4l separately. 3l: Cloorless oil; 1 H NMR (400 MHz, CDCl3) δ 8.53 (d, J = 5.2 Hz, 2H), 7.20 (d, J = 6.0 Hz, 2H), (m, 2H), (m, 1H), 2.09 (s, 3H), (m, 1H), 0.60 (tt, J = 8.9, 5.1 Hz, 1H), 0.45 (tt, J = 9.1, 5.1 Hz, 1H), 0.27 (dq, J = 9.8, 4.9 Hz, 1H), 0.14 (dt, J = 9.5, 4.8 Hz, 1H); 13 C NMR (100 MHz, CDCl3) δ 206.9, 154.8, 149.8, 123.4, 49.8, 45.4, 31.1, 17.1, 5.7, 4.7; IR (film): 3000, 2922, 1714, 1599, 1415, 993, 817 cm 1 ; HRMS (ESI-TOF) calculated for C12H16NO [M+H] , found l: White solid, mp C; 1 H NMR (400 MHz, CDCl3) δ 8.56 (d, J = 6.1 Hz, 2H), 7.42 (d, J = 6.2 Hz, 2H), 5.80 (d, J = 15.5 Hz, 2H), 5.19 (dd, J = 15.5, 9.0 Hz, 1H), 2.71 (brs, 1H), 1.60 (s, 3H), (m, 1H), (m, 2H), (m, S28
29 2H); 13 C NMR (100 MHz, CDCl3) δ 157.6, 149.6, 134.9, 133.3, 121.1, 73.9, 30.0, 13.90, 7.2 (two C atoms have the same chemical shift at 7.2 ppm); IR (film): 3194, 3003, 2978, 1455, 1416, 1063, 965, 913, 872 cm 1 ; HRMS (ESI-TOF) calculated for C12H16NO [M+H] , found m: Prepared following general procedure A using 2m (35.1 mg, 0.2 mmol, 1.0 equiv.), 4-cyanopyridine (31.2 mg, 0.3 mmol, 1.5 equiv.), B2(pin)2 (61.9 mg, 0.24 mmol, 1.2 equiv) and MTBE (1 ml) at 70 C. After 36 hours, following the described workup procedure, the reaction mixture was purified by preparative TLC on silica gel (PE/EtOAc = 2:1) to afford 3m (26.1 mg, 52% yield). 3m: Colorless oil; 1 H NMR (400 MHz, CDCl3) δ 8.54 (d, J = 4.8 Hz, 2H), 7.92 (d, J = 7.1 Hz, 2H), 7.56 (t, J = 7.4 Hz, 1H), 7.45 (t, J = 7.6 Hz, 2H), 7.28 (d, J = 6.1 Hz, 2H), (m, 2H), (m, 1H), (m, 1H), (m, 1H), (m, 1H), 0.30 (dq, J = 9.8, 4.9 Hz, 1H), 0.19 (dq, J = 9.9, 5.0 Hz, 1H); 13 C NMR (100 MHz, CDCl3) δ 198.3, 155.3, 149.7, 137.1, 133.6, 128.9, 128.3, 123.6, 45.8, 44.8, 17.2, 5.8, 4.9; IR (film): 2919, 2850, 1685, 1597, 1448, 1415, 993, 872 cm 1 ; HRMS (ESI-TOF) calculated for C17H18NO [M+H] , found n: Prepared following general procedure A using 2n (50.5mg, 0.2 mmol, 1.0 equiv.), 4-cyanopyridine (31.2 mg, 0.3 mmol, 1.5 equiv.), B2(pin)2 (61.9 mg, 0.24 S29
30 mmol, 1.2 equiv) and MTBE (1 ml) at 70 C. After 24 hours, following the described workup procedure, the reaction mixture was purified by preparative TLC on silica gel (PE/EtOAc = 1:1) to afford the pyridine 3n as the sole product (29.2 mg, 44% yield). 3n: Gum; 1 H NMR (400 MHz, CDCl3)δ 8.52 (d, J = 5.9 Hz, 2H), (m, 2H), 7.55 (t, J = 7.4 Hz, 1H), 7.44 (t, J = 7.7 Hz, 2H), (m, 7H), 4.48 (s, 2H), (m, 3H), (m, 1H), (m, 1H); 13 C NMR (100 MHz, CDCl3) δ 198.1, 152.5, 149.8, 138.1, 137.1, 133.6, 128.9, 128.7, 128.3, 127.9, 127.9, 123.9, 73.5, 72.9, 40.9, 40.8; IR (film): 3028, 2858, 1786, 1598, 1416, 1001, 818 cm 1 ; HRMS (ESI-TOF) calculated for C22H22NO2 [M+H] , found o: Prepared following general procedure A using 2o (47.4 mg, 0.2 mmol, 1.0 equiv.), 4-cyanopyridine (31.2 mg, 0.3 mmol, 1.5 equiv.), B2(pin)2 (61.9 mg, 0.24 mmol, 1.2 equiv) and MTBE (1 ml) at 70 C. After 24 hours, following the described workup procedure, the reaction mixture was purified by preparative TLC on silica gel (PE/EtOAc = 4:1) to afford the pyridine 3o as the sole product (32 mg, 50% yield). 3o: Colorless oil; 1 H NMR (400 MHz, CDCl3) δ 8.57 (d, J = 5.6 Hz, 2H), 7.86 (d, J = 7.2 Hz, 2H), 7.54 (t, J = 7.4 Hz, 1H), 7.42 (t, J = 7.7 Hz, 2H), (m, 4H), 7.16 (t, J = 7.3 Hz, 1H), 7.08 (d, J = 7.0 Hz, 2H), (m, 1H), 3.31 (dd, J = 6.9, 1.4 Hz, 2H), (m, 2H), (m, 1H), (m, 1H); 13 C NMR (100 MHz, CDCl3) δ 197.8, 155.3, 149.9, 141.4, 136.9, 133.6, 128.9, 128.7, 128.6, 128.2, 126.3, 123.9, 45.1, 40.4, 37.5, 33.8; IR (film): 3025, 2921, 1715, 1597, 1414, 993, 872 cm 1 ; HRMS (ESI-TOF) calculated for C22H22NO [M+H] , found S30
31 p and 4p: Prepared following general procedure A using 2p (35 mg, 0.2 mmol, 1.0 equiv.), 4-cyanopyridine (31.2 mg, 0.3 mmol, 1.5 equiv.), B2(pin)2 (61.9 mg, 0.24 mmol, 1.2 equiv) and MTBE (1 ml) at 70 C. After 24 hours, following the described workup procedure, the reaction mixture was purified by preparative TLC on silica gel (PE/EtOAc = 2:1) to afford the two pyridines (36 mg, 71% combined yield, 3p/4p=4:1). And the resulting mixture was further purified by preparative TLC (PE/isopropanol = 6:1) to afford 3p and 4p separately. 3p: Colorless oil; 1 H NMR (400 MHz, CDCl3) δ 8.55 (d, J = 5.2 Hz, 2H), 7.27 (t, J = 6.9 Hz, 2H), 7.19 (d, J = 7.1 Hz, 1H), 7.16 (d, J = 5.2 Hz, 2H), 7.09 (d, J = 7.3 Hz, 2H), 3.20 (dq, J = 12.3, 6.8 Hz, 1H), 2.77 (d, J = 7.0 Hz, 2H), 2.45 (t, J = 7.9 Hz, 2H), 2.05 (s, 3H), (m, 2H); 13 C NMR (100 MHz, CDCl3) δ 206.6, 153.7, 150.3, 141.5, 128.7, 128.5, 126.3, 123.4, 50.1, 40.1, 37.4, 33.7, 30.8; IR (film): 2921, 1685, 1597, 1448, 1001, 749 cm 1 ; HRMS (ESI-TOF) calculated for C17H20NO [M+H] , found p: White solid, mp C; 1 H NMR (400 MHz, CDCl3) δ 8.50 (d, J = 4.5 Hz, 2H), (m, 4H), 7.21 (t, J = 7.3 Hz, 1H), 7.16 (d, J = 7.3 Hz, 2H), (m, 2H), 2.88 (brs, 1H), 2.72 (t, J = 7.2 Hz, 2H), (m, 2H), 1.59 (s, 3H); 13 C NMR (100 MHz, CDCl3) δ 156.3, 149.9, 141.7, 136.8, 129.8, 128.9, 128.7, 126.3, 120.8, 74.0, 35.7, 34.2, 29.9; IR (film): 3357, 2920, 2848, 1470, 1412, 872, 745 cm 1 ; HRMS (ESI-TOF) calculated for C17H20NO [M+H] , found S31
32 3q and 4q: Prepared following general procedure A using 2q (23.3 μl, 0.2 mmol, 1.0 equiv.), 4-cyanopyridine (31.2 mg, 0.3 mmol, 1.5 equiv.), B2(pin)2 (61.9 mg, 0.24 mmol, 1.2 equiv) and MTBE (1 ml) at 70 C. After 24 hours, following the described workup procedure, the reaction mixture was purified by preparative TLC on silica gel (PE/EtOAc = 1:1) to afford the two pyridines (25.8 mg, 73% combined yield, 3q/4q=6.7:1). And the resulting mixture was further purified by preparative TLC on silica gel (PE/isopropanol = 6:1) to afford 3q and 4q separately. 3q: Colorless oil; 1 H NMR (400 MHz, CDCl3) δ 8.54 (d, J = 3.2 Hz, 2H), 7.28 (d, J = 4.6 Hz, 2H), 2.81 (s, 2H), 1.95 (s, 3H), 1.40 (s, 6H); 13 C NMR (100 MHz, CDCl3) δ 206.6, 158.9, 149.7, 121.5, 55.7, 37.3, 31.8, 28.6; IR (film): 2966, 1716, 1616, 1410, 996, 822 cm 1 ; HRMS (ESI-TOF) calculated for C11H16NO [M+H] , found q: White solid, mp C; 1 H NMR (400 MHz, CDCl3) δ 8.54 (d, J = 6.2 Hz, 2H), 7.43 (dd, J = 4.6, 1.6 Hz, 2H), 5.69 (s, 1H), 2.36 (s, 1H), 1.73 (d, J = 1.2 Hz, 3H), 1.56 (s, 3H), 1.44 (d, J = 1.1 Hz, 3H); 13 C NMR (100 MHz, CDCl3) δ 159.4, 149.5, 139.4, 131.3, 121.1, 73.4, 34.4, 26.9, 19.8; IR (film): 3194, 2975, 2926, 1615, 1241, 1063, 1002, 827 cm 1 ; HRMS (ESI-TOF) calculated for C11H16NO [M+H] , found r: Prepared following general procedure A using 2r (35.2 mg, 0.2 mmol, 1.0 S32
33 equiv.), 4-cyanopyridine (31.2 mg, 0.3 mmol, 1.5 equiv.), B2(pin)2 (61.9 mg, 0.24 mmol, 1.2 equiv) and MTBE (1 ml) at 70 C. After 24 hours, following the described workup procedure, the reaction mixture was purified by preparative TLC on silica gel (PE/EtOAc = 2:1) to afford the 3r as the sole product (35 mg, 69% yield). 3r: Colorless oil; 1 H NMR (400 MHz, CDCl3) δ 8.52 (d, J = 5.2 Hz, 2H), (m, 3H), 7.18 (d, J = 5.2 Hz, 2H), 7.08 (d, J = 6.9 Hz, 2H), 3.51 (s, 2H), 2.85 (s, 2H), 1.41 (s, 6H); 13 C NMR (100 MHz, CDCl3) δ 205.9, 157.8, 149.9, 133.9, 129.6, 129.0, 127.4, 121.2, 53.8, 51.8, 37.3, 28.7 (two C atoms have the same chemical shift at 28.7 ppm); IR (film): 2964, 1715, 1596, 1409, 913, 821 cm 1 ; HRMS (ESI-TOF) calculated for C17H20NO [M+H] , found s: Prepared following general procedure A using 2s (28 mg, 0.2 mmol, 1.0 equiv.), 4-cyanopyridine (31.2 mg, 0.3 mmol, 1.5 equiv.), B2(pin)2 (61.9 mg, 0.24 mmol, 1.2 equiv) and MTBE (1 ml) at 70 C. After 24 hours, following the described workup procedure, the reaction mixture was purified by preparative TLC on silica gel (PE/EtOAc/ i PrOH/AcOH = 50:10:1:1) to afford the pyridine 3s as the sole product (30.5 mg, 70% yield). 3s: Yellowish-brown oil; 1 H NMR (400 MHz, CDCl3) δ 8.56 (d, J = 6.3 Hz, 2H), 7.30 (d, J = 6.4 Hz, 2H), 5.85 (s, 1H), 2.78 (s, 2H), 2.02 (s, 3H), 1.79 (s, 3H), 1.41 (s, 6H); 13 C NMR (100 MHz, CDCl3) δ 198.9, 158.4, , 149.9, 125.0, 121.3, 56.5, 37.7, 28.8, 27.9, 20.9; IR (film): 2968, 2933, 1682, 1597, 1428, 1046, 995, 822 cm 1 ; HRMS (ESI-TOF) calculated for C14H20NO [M+H] , found S33
34 3t: Prepared following general procedure A using 2t (32 mg, 0.2 mmol, 1.0 equiv.), 4-cyanopyridine (31.2 mg, 0.3 mmol, 1.5 equiv.), B2(pin)2 (61.9 mg, 0.24 mmol, 1.2 equiv) and MTBE (1 ml) at 70 C. After 24 hours, following the described workup procedure, the reaction mixture was purified by preparative TLC on silica gel (PE/EtOAc = 2:1) to afford the pyridine 3t as the sole product (38.7 mg, 81% yield). 3t: Colorless oil; 1 H NMR (400 MHz, CDCl3) δ 8.53 (d, J = 6.3 Hz, 2H), 7.84 (d, J = 7.1 Hz, 2H), 7.53 (t, J = 7.4 Hz, 1H), 7.41 (t, J = 7.7 Hz, 2H), 7.32 (d, J = 6.3 Hz, 2H), 3.39 (s, 2H), 1.48 (s, 6H); 13 C NMR (100 MHz, CDCl3) δ 197.8, 159.7, 149.5, 137.6, 133.4, 128.8, 128.2, 121.7, 50.3, 37.5, 29.1; IR (film): 3025, 2965, 1685, 1596, 1410, 1003, 822 cm 1 ; HRMS (ESI-TOF) calculated for C16H18NO [M+H] , found u: Prepared following general procedure A using 2u (45 mg, 0.2 mmol, 1.0 equiv.), 4-cyanopyridine (31.2 mg, 0.3 mmol, 1.5 equiv.), B2(pin)2 (61.9 mg, 0.24 mmol, 1.2 equiv) and MTBE (1 ml) at 70 C. After 24 hours, following the described workup procedure, the reaction mixture was purified by preparative TLC on silica gel (PE/EtOAc/AcOH = 40:20:1) to afford the pyridine 3u as the sole product (43.5 mg, 71% yield). 3u: Pale-yellow oil; 1 H NMR (400 MHz, CDCl3) δ 8.57 (d, J = 6.2 Hz, 2H), 7.83 S34
35 (d, J = 8.0 Hz, 2H), 7.52 (t, J = 7.4 Hz, 1H), 7.41 (t, J = 7.6 Hz, 2H), 7.30 (d, J = 6.2 Hz, 2H), (m, 1H), 3.51 (d, J = 17.0 Hz, 1H), 3.29 (d, J = 17.0 Hz, 1H), (m, 3H), (m, 4H), 1.54 (s, 3H), 1.47 (s, 3H); 13 C NMR (100 MHz, CDCl3) δ 197.7, 158.6, 149.6, 137.8, 133.4, 132.4, 128.9, 128.1, 123.9, 122.3, 49.2, 43.1, 40.8, 25.9, 23.9, 22.9, 17.9; IR (film): 3025, 2969, 2924, 1689, 1596, 1447, 1410, 1218, 821, 753 cm 1 ; HRMS (ESI-TOF) calculated for C21H26NO [M+H] , found v: Prepared following general procedure A using 2c (24.7 μl, 0.2 mmol, 1.0 equiv.), 3-fuloro-4-cyanopyridine (24.7 μl, 0.3 mmol, 1.5 equiv.), B2(pin)2 (61.9 mg, 0.24 mmol, 1.2 equiv) and MTBE (1 ml) at 70 C. After 36 hours, following the described workup procedure, the reaction mixture was purified by preparative TLC on silica gel (PE/EtOAc = 4:1) to afford the pyridine 3v as the sole product (24.8 mg, 60% yield). 3v: Colorless oil; 1 H NMR (400 MHz, CDCl3) δ (m, 2H), 7.10 (t, J = 5.6 Hz, 1H), 3.20 (t, J = 11.6 Hz, 1H), 2.90 (dd, J = 13.9, 12.8 Hz, 1H), (m, 3H), (m, 3H), (m, 2H), (m, 1H); 13 C NMR (100 MHz, CDCl3) δ 212.1, (d, J = Hz), (d, J = 5.0 Hz), (d, J = 12.3 Hz), (d, J = 25.3 Hz), (d, J = 1.9 Hz), 48.9, 44.0, 37.2, 35.7, 29.5, 24.3; 19 F NMR (376 MHz, CDCl3) δ (d, J = 6.1 Hz); IR (film): 2931, 2858, 1702, 1604, 1414, 1241, 937, 840 cm 1 ; HRMS (ESI-TOF) calculated for C12H15FNO [M+H] + S35
36 , found w: Prepared following general procedure A using 2c (24.7 μl, 0.2 mmol, 1.0 equiv.), 3-chloro-4-cyanopyridine (41.6 mg, 0.3 mmol, 1.5 equiv.), B2(pin)2 (61.9 mg, 0.24 mmol, 1.2 equiv) and MTBE (1 ml) at 70 C. After 36 hours, following the described workup procedure, the reaction mixture was purified by preparative TLC on silica gel (PE/EtOAc = 4:1) to afford the pyridine 3w as the sole product (28 mg, 63% yield). 3w: Yellowish white solid, mp C; 1 H NMR (400 MHz, CDCl3) δ 8.51 (s, 1H), 8.40 (d, J = 5.1 Hz, 1H), 7.11 (d, J = 5.1 Hz, 1H), 3.38 (t, J = 11.2 Hz, 1H), 2.81 (dd, J = 14.8, 11.8 Hz, 1H), (m, 3H), (m, 3H), (m, 3H); 13 C NMR (100 MHz, CDCl3) δ 212.1, 152.5, 149.9, 148.5, 131.2, 121.9, 49.0, 44.0, 38.1, 37.1, 29.6, 24.5; IR (film):2930, 2857, 1702, 1582, 1399, 1241, 937, 842 cm 1 ; HRMS (ESI-TOF) calculated for C12H15ClNO [M+H] , found x: prepared following general procedure A using 2c (24.7 μl, 0.2 mmol, 1.0 equiv.), 3-methyl-4-cyanopyridine (35.4 mg, 0.3 mmol, 1.5 equiv.), B2(pin)2 (61.9 mg, 0.24 mmol, 1.2 equiv) and MTBE (1 ml) at 70 C. After 36 hours, following the described workup procedure, the reaction mixture was purified by preparative TLC on silica gel (PE/EtOAc = 1/1) to afford the pyridine 3x as the sole product (20.7 mg, 51% yield). S36
37 3x: Colorless oil; 1 H NMR (400 MHz, CDCl3) δ 8.39 (d, J = 5.2 Hz, 1H), 8.36 (s, 1H), 7.06 (d, J = 5.2 Hz, 1H), 3.03 (t, J = 11.5 Hz, 1H), (m, 1H), (m, 3H), 2.29 (s, 3H), (m, 3H), (m, 2H), (m, 1H); 13 C NMR (100 MHz, CDCl3) δ 212.7, 154.5, 151.1, 148.1, 130.7, 120.5, 49.7, 441, 37.9, 37.8, 29.6, 24.3, 16.4; IR (film):2931, 2858, 1702, 1582, 1415, 1240, 937, 842 cm 1 ; HRMS (ESI-TOF) calculated for C13H18NO [M+H] , found y: prepared following general procedure A using 2c (24.7 μl, 0.2 mmol, 1.0 equiv.), 3-bromo-4-cyano pyridine (56 mg, 0.3 mmol, 1.5 equiv.), B2(pin)2 (61.9 mg, 0.24 mmol, 1.2 equiv) and MTBE (1 ml) at 40 C. After 36 hours, following the described workup procedure, the reaction mixture was purified by preparative TLC (PE/EtOAc = 4:1) to afford the pyridine 3y as the sole product (18 mg, 38% yield). 3y: Yellow solid, mp C; 1 H NMR (400 MHz, CDCl3) δ 8.66 (s, 1H), 8.44 (d, J = 5.0 Hz, 1H), 7.12 (d, J = 5.0 Hz, 1H), 3.36 (t, J = 10.9 Hz, 1H), 2.81 (dd, J = 14.6, 12.0 Hz, 1H), (m, 3H), (m, 3H), (m, 3H); 13 C NMR (100 MHz, CDCl3) δ 212.1, 154.2, 152.4, 149.0, 122.5, 122.3, 49.2, 44.0, 40.6, 37.3, 29.7, 24.5; IR (film): 2929, 2856, 1701, 1579, 1398, 1239, 937, 842 cm 1 ; HRMS (ESI-TOF) calculated for C12H15BrNO [M+H] , found z: prepared following general procedure A using 2c (24.7 μl, 0.2 mmol, 1.0 S37
38 equiv.), 3-methylthio-4-cyanopyridine (45 mg, 0.3 mmol, 1.5 equiv.), B2(pin)2 (61.9 mg, 0.24 mmol, 1.2 equiv) and MTBE (1 ml) at 40 C. After 36 hours, following the described workup procedure, the reaction mixture was purified by preparative TLC on silica gel (PE/EtOAc = 2:1) to afford the pyridine 3z as the sole product (23 mg, 48% yield). 3z: Yellow amorphous solid; 1 H NMR (400 MHz, CDCl3) δ 8.42 (s, 1H), 8.34 (d, J = 5.1 Hz, 1H), 7.03 (d, J = 5.1 Hz, 1H), 3.37 (t, J = 11.2 Hz, 1H), 2.82 (dd, J = 14.9, 11.7 Hz, 1H), (m, 3H), 2.51 (s, 3H), (m, 3H), (m, 3H); 13 C NMR (100 MHz, CDCl3) δ 212.6, 153.8, 148.1, 147.3, 133.2, 120.3, 49.6, 44.1, 38.1, 37.6, 29.8, 24.6, 16.7; IR (film): 3378, 2924, 2855, 1703, 1574, 1443, 1266, 972, 870 cm 1 ; HRMS (ESI-TOF) calculated for C13H18NOS [M+H] , found A: prepared following general procedure A using 2A (31.6 mg, 0.2 mmol, 1.0 equiv.), 4-cyanopyridine (31.2 mg, 0.3 mmol, 1.5 equiv.), B2(pin)2 (61.9 mg, 0.24 mmol, 1.2 equiv) and MTBE (1 ml) at 40 C. After 36 hours, following the described workup procedure, the reaction mixture was purified by preparative TLC (PE/EtOAc = 2:1) to afford the pyridine 3A as the sole product (20 mg, 40% yield). NMR spectrums of the compounds 3A are consistent with previous reported results. [21] 3A: gum; 1 H NMR (400 MHz, CDCl3) δ 8.50 (dd, J = 4.4, 1.6 Hz, 2H), 8.04 (dd, J = 7.9, 1.1 Hz, 1H), 7.46 (td, J = 7.5, 1.4 Hz, 1H), 7.31 (t, J = 7.3 Hz, 1H), 7.21 (d, J S38
39 = 7.7 Hz, 1H), 7.17 (dd, J = 4.5, 1.5 Hz, 2H), 3.45 (dd, J = 13.6, 4.3 Hz, 1H), (m, 2H), (m, 2H), (m, 1H), (m, 1H); 13 C NMR (101 MHz, CDCl3) δ 198.8, 149.9, 149.8, 144.1, 133.8, 132.5, 129.1, 127.9, 127.1, 125.1, 48.9, 35.6, 29.1, B: prepared following general procedure A using 2B (81 mg, 0.2 mmol, 1.0 equiv.), 4-cyanopyridine (31.2 mg, 0.3 mmol, 1.5 equiv.), B2(pin)2 (61.9 mg, 0.24 mmol, 1.2 equiv) and MTBE (1 ml) at 70 C. After 36 hours, following the described workup procedure, the reaction mixture was purified by flash column chromatography on silica gel (PE/EtOAc = 3:1 PE/EtOAc/TEA = 1:2:0.03) to afford the pyridine 3B (2.6:1 mixture of diastereomers as determined by 1 H NMR, 43 mg, 44% yield). Separation of the diastereomers was accomplished by recrystallization from acetonitrile to afford the 3B as one diasteroisomer (23 mg, 24% yield, d.r. = 95:5). However, the relative configuration of the major isomer could not be assigned by NMR method. 3B: White solid, mp C; 1 H NMR (400 MHz, (CD3)2SO) δ 8.51 (d, J = 5.4 Hz, 2H), 7.38 (d, J = 5.8 Hz, 1.9H), 7.33 (d, J = 5.9, 0.1H), 5.41 (s, 1H), 5.32 (s, 1H), 5.14 (s, 1H), 5.08 (d, J = 17.6 Hz, 1H), 4.72 (d, J = 17.5 Hz, 1H), 4.16 (s, 2H), (m, 1H) (one of the H overlap in the solvent peak), 2.33 (t, J = 12.1 Hz, 1H), (m, 4H), (m, 4H), (m, 5H), (m, 1H), S39
Highly Regioselective Lithiation of Pyridines Bearing an Oxetane Unit by n-buthyllithium
Electronic Supplementary Material (ESI) for ChemComm. This journal is The Royal Society of Chemistry 2014 Highly Regioselective Lithiation of Pyridines Bearing an Oxetane Unit by n-buthyllithium Guy Rouquet,*
More informationCarbonylative Coupling of Allylic Acetates with. Arylboronic Acids
Electronic Supplementary Material (ESI) for ChemComm. This journal is The Royal Society of Chemistry 2015 Carbonylative Coupling of Allylic Acetates with Arylboronic Acids Wei Ma, a Ting Yu, Dong Xue,*
More informationBrønsted Base-Catalyzed Reductive Cyclization of Alkynyl. α-iminoesters through Auto-Tandem Catalysis
Supporting Information Brønsted Base-Catalyzed Reductive Cyclization of Alkynyl α-iminoesters through Auto-Tandem Catalysis Azusa Kondoh, b and Masahiro Terada* a a Department of Chemistry, Graduate School
More informationSupporting Information
Supporting Information (Tetrahedron. Lett.) Cavitands with Inwardly and Outwardly Directed Functional Groups Mao Kanaura a, Kouhei Ito a, Michael P. Schramm b, Dariush Ajami c, and Tetsuo Iwasawa a * a
More informationSupporting Information
Supporting Information Divergent Reactivity of gem-difluoro-enolates towards Nitrogen Electrophiles: Unorthodox Nitroso Aldol Reaction for Rapid Synthesis of -Ketoamides Mallu Kesava Reddy, Isai Ramakrishna,
More informationQile Wang, and Nan Zheng* Department of Chemistry and Biochemistry, University of Arkansas. Fayetteville, Arkansas,
Supporting Information A Photocatalyzed Synthesis of Naphthalenes by Using Aniline as a Traceless Directing Group in [4+2] Annulation of AminoBenzocyclobutenes with Alkynes Qile Wang, and Nan Zheng* Department
More informationThe First Asymmetric Total Syntheses and. Determination of Absolute Configurations of. Xestodecalactones B and C
Supporting Information The First Asymmetric Total Syntheses and Determination of Absolute Configurations of Xestodecalactones B and C Qiren Liang, Jiyong Zhang, Weiguo Quan, Yongquan Sun, Xuegong She*,,
More informationSupporting Information
Electronic Supplementary Material (ESI) for RSC Advances. This journal is The Royal Society of Chemistry 2016 Supporting Information TEMPO-catalyzed Synthesis of 5-Substituted Isoxazoles from Propargylic
More informationSupporting Information. Table of Contents. 1. General Notes Experimental Details 3-12
Supporting Information Table of Contents page 1. General Notes 2 2. Experimental Details 3-12 3. NMR Support for Timing of Claisen/Diels-Alder/Claisen 13 4. 1 H and 13 C NMR 14-37 General Notes All reagents
More informationSynthesis of Trifluoromethylated Naphthoquinones via Copper-Catalyzed. Cascade Trifluoromethylation/Cyclization of. 2-(3-Arylpropioloyl)benzaldehydes
Supporting Information to Synthesis of Trifluoromethylated Naphthoquinones via Copper-Catalyzed Cascade Trifluoromethylation/Cyclization of 2-(3-Arylpropioloyl)benzaldehydes Yan Zhang*, Dongmei Guo, Shangyi
More informationSuzuki-Miyaura Coupling of Heteroaryl Boronic Acids and Vinyl Chlorides
Suzuki-Miyaura Coupling of Heteroaryl Boronic Acids and Vinyl Chlorides Ashish Thakur, Kainan Zhang, Janis Louie* SUPPORTING INFORMATION General Experimental: All reactions were conducted under an atmosphere
More informationSupporting Information
Electronic Supplementary Material (ESI) for rganic & Biomolecular Chemistry. This journal is The Royal Society of Chemistry 2015 Supporting Information Palladium-Catalyzed Regio-selective xidative C-H
More informationPoly(4-vinylimidazolium)s: A Highly Recyclable Organocatalyst Precursor for. Benzoin Condensation Reaction
Electronic Supplementary Material (ESI) for RSC Advances. This journal is The Royal Society of Chemistry 24 Supporting Information Poly(4-vinylimidazolium)s: A Highly Recyclable rganocatalyst Precursor
More informationDomino reactions of 2-methyl chromones containing an electron withdrawing group with chromone-fused dienes
Domino reactions of 2-methyl chromones containing an electron withdrawing group with chromone-fused dienes Jian Gong, Fuchun Xie, Wenming Ren, Hong Chen and Youhong Hu* State Key Laboratory of Drug Research,
More informationSupporting Information for Synthesis of C(3) Benzofuran Derived Bis-Aryl Quaternary Centers: Approaches to Diazonamide A
Fuerst et al. Synthesis of C(3) Benzofuran Derived Bis-Aryl Quaternary Centers: Approaches to Diazonamide A S1 Supporting Information for Synthesis of C(3) Benzofuran Derived Bis-Aryl Quaternary Centers:
More informationSilver-catalyzed decarboxylative acylfluorination of styrenes in aqueous media
Electronic Supplementary Material (ESI) for ChemComm. This journal is The Royal Society of Chemistry 2014 Supporting Information Silver-catalyzed decarboxylative acylfluorination of styrenes in aqueous
More informationElectronic Supplementary Material (ESI) for Chemical Communications This journal is The Royal Society of Chemistry 2012
Ring Expansion of Alkynyl Cyclopropanes to Highly substituted Cyclobutenes via a N-Sulfonyl-1,2,3-Triazole Intermediate Renhe Liu, Min Zhang, Gabrielle Winston-Mcerson, and Weiping Tang* School of armacy,
More informationSupporting Information
Supporting Information Wiley-VCH 2006 69451 Weinheim, Germany A Highly Enantioselective Brønsted Acid Catalyst for the Strecker Reaction Magnus Rueping, * Erli Sugiono and Cengiz Azap General: Unless otherwise
More informationDivergent Synthesis of CF 3 -Substituted Polycyclic Skeletons Based on Control of Activation Site of Acid Catalysts
Electronic Supplementary Material (ESI) for ChemComm. This journal is The Royal Society of Chemistry 2018 Divergent Synthesis of CF 3 -Substituted Polycyclic Skeletons Based on Control of Activation Site
More informationSupporting Information
Supporting Information Synthesis of H-Indazoles from Imidates and Nitrosobenzenes via Synergistic Rhodium/Copper Catalysis Qiang Wang and Xingwei Li* Dalian Institute of Chemical Physics, Chinese Academy
More informationCu-Catalyzed Synthesis of 3-Formyl imidazo[1,2-a]pyridines. and Imidazo[1,2-a]pyrimidines by Employing Ethyl Tertiary
Cu-Catalyzed Synthesis of 3-Formyl imidazo[1,2-a]pyridines and Imidazo[1,2-a]pyrimidines by Employing Ethyl Tertiary Amines as Carbon Sources Changqing Rao, Shaoyu Mai and Qiuling Song* Institute of Next
More informationSupporting Information
Supporting Information Silver-Mediated Oxidative Trifluoromethylation of Alcohols to Alkyl Trifluoromethyl Ethers Jian-Bo Liu, Xiu-Hua Xu, and Feng-Ling Qing Table of Contents 1. General Information --------------------------------------------------------------------------2
More informationSynthesis of Glaucogenin D, a Structurally Unique. Disecopregnane Steroid with Potential Antiviral Activity
Supporting Information for Synthesis of Glaucogenin D, a Structurally Unique Disecopregnane Steroid with Potential Antiviral Activity Jinghan Gui,* Hailong Tian, and Weisheng Tian* Key Laboratory of Synthetic
More informationSupporting Information for. A New Method for the Cleavage of Nitrobenzyl Amides and Ethers
SI- 1 Supporting Information for A ew Method for the Cleavage of itrobenzyl Amides and Ethers Seo-Jung Han, Gabriel Fernando de Melo, and Brian M. Stoltz* The Warren and Katharine Schlinger Laboratory
More informationPalladium-Catalyzed Oxidative Cyclization of Tertiary Enamines for Synthesis of 1,3,4-Trisubstituted Pyrroles and 1,3-Disubstituted Indoles
Supporting Information for Palladium-Catalyzed Oxidative Cyclization of Tertiary Enamines for Synthesis of 1,3,4-Trisubstituted Pyrroles and 1,3-Disubstituted Indoles Xiao-Li Lian, Zhi-Hui Ren, Yao-Yu
More informationSupplementary Information. Direct difunctionalization of alkynes with sulfinic acids and
Electronic upplementary Material (E) for RC Advances. This journal is The Royal ociety of Chemistry 204 upplementary nformation Direct difunctionalization of alkynes with sulfinic acids and melecular iodine:
More informationHualong Ding, Songlin Bai, Ping Lu,* Yanguang Wang*
Supporting Information for Preparation of 2-Amino-3-arylindoles via Pd-Catalyzed Coupling between 3-Diazoindolin-2-imines and Arylboronic Acids as well as Their Extension to 3-Aryl-3-fluoroindolin-2-imines
More informationSupporting Information
Supporting Information Total Synthesis of (±)-Grandilodine B Chunyu Wang, Zhonglei Wang, Xiaoni Xie, Xiaotong Yao, Guang Li, and Liansuo Zu* School of Pharmaceutical Sciences, Tsinghua University, Beijing,
More informationSupporting Information
Supporting Information Copyright Wiley-VCH Verlag GmbH & Co. KGaA, 69451 Weinheim, 2012 Subcellular Localization and Activity of Gambogic Acid Gianni Guizzunti,* [b] Ayse Batova, [a] Oraphin Chantarasriwong,
More informationIndium Triflate-Assisted Nucleophilic Aromatic Substitution Reactions of. Nitrosobezene-Derived Cycloadducts with Alcohols
Supporting Information Indium Triflate-Assisted ucleophilic Aromatic Substitution Reactions of itrosobezene-derived Cycloadducts with Alcohols Baiyuan Yang and Marvin J. Miller* Department of Chemistry
More informationSynthetic Studies on Norissolide; Enantioselective Synthesis of the Norrisane Side Chain
rganic Lett. (Supporting Information) 1 Synthetic Studies on Norissolide; Enantioselective Synthesis of the Norrisane Side Chain Charles Kim, Richard Hoang and Emmanuel A. Theodorakis* Department of Chemistry
More informationSYNTHESIS OF A 3-THIOMANNOSIDE
Supporting Information SYNTHESIS OF A 3-THIOMANNOSIDE María B Comba, Alejandra G Suárez, Ariel M Sarotti, María I Mangione* and Rolando A Spanevello and Enrique D V Giordano Instituto de Química Rosario,
More informationPd(II) Catalyzed C3-selective arylation of pyridine with (hetero)arenes SUPPORTING INFORMATION
Pd(II) Catalyzed C3-selective arylation of pyridine with (hetero)arenes Guo-Lin Gao,, Wujiong Xia, Pankaj Jain and Jin-Quan Yu *, Department of Chemistry, The Scripps Research Institute, 10550 N. Torrey
More informationDual role of Allylsamarium Bromide as Grignard Reagent and a. Single Electron Transfer Reagent in the One-Pot Synthesis of.
Dual role of Allylsamarium Bromide as Grignard Reagent and a Single Electron Transfer Reagent in the One-Pot Synthesis of Terminal Olefins Ying Li, Yuanyuan Hu and Songlin Zhang* Key Laboratory of Organic
More informationSupporting Information
Supporting Information Copyright Wiley-VCH Verlag GmbH & Co. KGaA, 69451 Weinheim, 2014 Supporting Information Palladium-Catalyzed Construction of Spirooxindoles by Arylative Cyclization of 3-( -Disubstituted)allylidene-2-Oxindoles
More informationSUPPORTING INFORMATION
SUPPORTING INFORMATION Asymmetric Vinylogous aza-darzens Approach to Vinyl Aziridines Isaac Chogii, Pradipta Das, Michael D. Delost, Mark N. Crawford and Jon T. Njardarson* Department of Chemistry and
More informationfor Brønsted Base-Mediated Aziridination of 2- Alkyl Substituted-1,3-Dicarbonyl Compounds and 2-Acyl-1,4-Dicarbonyl Compounds by Iminoiodanes
10.1071/CH16580_AC CSIRO 2017 Australian Journal of Chemistry 2017, 70(4), 430-435 Supplementary Material for Brønsted Base-Mediated Aziridination of 2- Alkyl Substituted-1,3-Dicarbonyl Compounds and 2-Acyl-1,4-Dicarbonyl
More informationSupporting Information. Rhodium(III)-Catalyzed Synthesis of Naphthols via C-H Activation. of Sulfoxonium Ylides. Xingwei Li*, Table of Contents
Supporting Information Rhodium(III)-Catalyzed Synthesis of Naphthols via C-H Activation of Sulfoxonium Ylides Youwei Xu,, Xifa Yang,, Xukai Zhou,, Lingheng Kong,, and Xingwei Li*, Dalian Institute of Chemical
More informationSupporting Information
Supporting Information Efficient Short Step Synthesis of Corey s Tamiflu Intermediate Nsiama Tienabe Kipassa, Hiroaki kamura, * Kengo Kina, Tetsuo Iwagawa, and Toshiyuki Hamada Department of Chemistry
More informationSupporting Information
Electronic Supplementary Material (ESI) for Organic Chemistry Frontiers. This journal is the Partner Organisations 2016 Supporting Information Synthesis of Biaryl Sultams Using Visible-Light-Promoted Denitrogenative
More informationSupplementary Material
10.1071/CH13324_AC CSIRO 2013 Australian Journal of Chemistry 2013, 66(12), 1570-1575 Supplementary Material A Mild and Convenient Synthesis of 1,2,3-Triiodoarenes via Consecutive Iodination/Diazotization/Iodination
More informationSupporting information for A simple copper-catalyzed two-step one-pot synthesis of indolo[1,2-a]quinazoline
Supporting information for A simple copper-catalyzed two-step one-pot synthesis of indolo[1,2-a]quinazoline Chunpu Li 1,2, Lei Zhang 2, Shuangjie Shu 2 and Hong Liu* 1,2 Address: 1 Department of Medicinal
More informationSelective Reduction of Carboxylic acids to Aldehydes Catalyzed by B(C 6 F 5 ) 3
S1 Selective Reduction of Carboxylic acids to Aldehydes Catalyzed by B(C 6 F 5 ) 3 David Bézier, Sehoon Park and Maurice Brookhart* Department of Chemistry, University of North Carolina at Chapel Hill,
More informationSupporting Information
Supporting Information Enantioselective Synthesis of 3-Alkynyl-3-Hydroxyindolin-2-ones by Copper-Catalyzed Asymmetric Addition of Terminal Alkynes to Isatins Ning Xu, Da-Wei Gu, Jing Zi, Xin-Yan Wu, and
More informationSupporting Information. Cu(I)-Catalyzed Three-Component Reaction of Diazo. Compound with Terminal Alkyne and Nitrosobenzene for
Supporting Information of Cu(I)-Catalyzed Three-Component Reaction of Diazo Compound with Terminal Alkyne and Nitrosobenzene for the Synthesis of Trifluoromethyl Dihydroisoxazoles Xinxin Lv, Zhenghui Kang,
More informationA Facile and General Approach to 3-((Trifluoromethyl)thio)- 4H-chromen-4-one
A Facile and General Approach to 3-((Trifluoromethyl)thio)- 4H-chromen-4-one Haoyue Xiang and Chunhao Yang* State Key Laboratory of Drug Research, Shanghai Institute of Materia Medica, Chinese Academy
More informationSUPPORTING INFORMATION. Fathi Elwrfalli, Yannick J. Esvan, Craig M. Robertson and Christophe Aïssa
Electronic Supplementary Material (ESI) for ChemComm. This journal is The Royal Society of Chemistry 2018 SUPPORTING INFORMATION S1 Fathi Elwrfalli, Yannick J. Esvan, Craig M. Robertson and Christophe
More informationDepartment of Chemistry and Biochemistry, California State University Northridge, Northridge, CA Experimental Procedures
Supporting Information Low Temperature n-butyllithium-induced [3,3]-Sigmatropic Rearrangement/Electrophile Trapping Reactions of Allyl-1,1- Dichlorovinyl Ethers. Synthesis of - - and -lactones. Aaron Christopher
More informationSupporting Information
Electronic Supplementary Material (ESI) for RSC Advances. This journal is The Royal Society of Chemistry 2014 Supporting Information Rh 2 (Ac) 4 -Catalyzed 2,3-Migration of -rrocenecarboxyl -Diazocarbonyl
More informationSupplementary Materials
Supplementary Materials ORTHOGOALLY POSITIOED DIAMIO PYRROLE- AD IMIDAZOLE- COTAIIG POLYAMIDES: SYTHESIS OF 1-(3-SUBSTITUTED-PROPYL)-4- ITROPYRROLE-2-CARBOXYLIC ACID AD 1-(3-CHLOROPROPYL)-4- ITROIMIDAZOLE-2-CARBOXYLIC
More informationEnantioselective Synthesis of Fused Heterocycles with Contiguous Stereogenic Centers by Chiral Phosphoric Acid-Catalyzed Symmetry Breaking
Electronic Supplementary Material (ESI) for ChemComm. This journal is The Royal Society of Chemistry 2015 Enantioselective Synthesis of Fused Heterocycles with Contiguous Stereogenic Centers by Chiral
More informationRing-Opening / Fragmentation of Dihydropyrones for the Synthesis of Homopropargyl Alcohols
Ring-pening / Fragmentation of Dihydropyrones for the Synthesis of Homopropargyl Alcohols Jumreang Tummatorn, and Gregory B. Dudley, * Department of Chemistry and Biochemistry, Florida State University,
More informationSupporting Information
Supporting Information Construction of Highly Functional α-amino itriles via a ovel Multicomponent Tandem rganocatalytic Reaction: a Facile Access to α-methylene γ-lactams Feng Pan, Jian-Ming Chen, Zhe
More informationSynthesis of borinic acids and borinate adducts using diisopropylaminoborane
Synthesis of borinic acids and borinate adducts using diisopropylaminoborane Ludovic Marciasini, Bastien Cacciuttolo, Michel Vaultier and Mathieu Pucheault* Institut des Sciences Moléculaires, UMR 5255,
More informationSupporting Information
Supporting Information for Cu-Mediated trifluoromethylation of benzyl, allyl and propargyl methanesulfonates with TMSCF 3 Xueliang Jiang 1 and Feng-Ling Qing* 1,2 Address: 1 Key Laboratory of Organofluorine
More informationBulletin of the Chemical Society of Japan
Supporting Information Bulletin of the Chemical Society of Japan Enantioselective Copper-Catalyzed 1,4-Addition of Dialkylzincs to Enones Followed by Trapping with Allyl Iodide Derivatives Kenjiro Kawamura,
More informationA Total Synthesis of Paeoveitol
A Total Synthesis of Paeoveitol Lun Xu, Fengyi Liu, Li-Wen Xu, Ziwei Gao, Yu-Ming Zhao* Key Laboratory of Applied Surface and Colloid Chemistry of MOE & School of Chemistry and Chemical Engineering, Shaanxi
More informationSupporting Information:
Supporting Information: An rganocatalytic Asymmetric Sequential Allylic Alkylation/Cyclization of Morita-Baylis-Hillman Carbonates and 3-Hydroxyoxindoles Qi-Lin Wang a,b, Lin Peng a, Fei-Ying Wang a, Ming-Liang
More informationTetrahydrofuran (THF) was distilled from benzophenone ketyl radical under an argon
SUPPLEMENTARY METHODS Solvents, reagents and synthetic procedures All reactions were carried out under an argon atmosphere unless otherwise specified. Tetrahydrofuran (THF) was distilled from benzophenone
More informationHow to build and race a fast nanocar Synthesis Information
How to build and race a fast nanocar Synthesis Information Grant Simpson, Victor Garcia-Lopez, Phillip Petemeier, Leonhard Grill*, and James M. Tour*, Department of Physical Chemistry, University of Graz,
More informationSupporting Information. Rh (III)-Catalyzed Meta-C H Olefination Directed by a Nitrile Template
Supporting Information Rh (III)-Catalyzed Meta-C H Olefination Directed by a Nitrile Template Hua-Jin Xu, Yi Lu, *, Marcus E. Farmer, Huai-Wei Wang, Dan Zhao, Yan-Shang Kang, Wei-Yin Sun, *, Jin-Quan Yu
More informationAn unusual dianion equivalent from acylsilanes for the synthesis of substituted β-keto esters
S1 An unusual dianion equivalent from acylsilanes for the synthesis of substituted β-keto esters Chris V. Galliford and Karl A. Scheidt* Department of Chemistry, Northwestern University, 2145 Sheridan
More informationSupplementary Information
Supplementary Information C aryl -C alkyl bond formation from Cu(ClO 4 ) 2 -mediated oxidative cross coupling reaction between arenes and alkyllithium reagents through structurally well-defined Ar-Cu(III)
More informationIron Catalyzed Cross Couplings of Azetidines: Application to an Improved Formal Synthesis of a Pharmacologically Active Molecule
Electronic Supplementary Material (ESI) for ChemComm. This journal is The Royal Society of Chemistry 2014 Iron Catalyzed Cross Couplings of Azetidines: Application to an Improved Formal Synthesis of a
More informationSilver-Catalyzed Cascade Reaction of β-enaminones and Isocyanoacetates to Construct Functionalized Pyrroles
Supporting Information for Silver-Catalyzed Cascade Reaction of β-enaminones and Isocyanoacetates to Construct Functionalized Pyrroles Guichun Fang, a, Jianquan Liu a,c, Junkai Fu,* a Qun Liu, a and Xihe
More informationSupporting Information
Electronic Supplementary Material (ESI) for ChemComm. This journal is The Royal Society of Chemistry 2014 Supporting Information Pd-Catalyzed C-H Activation/xidative Cyclization of Acetanilide with orbornene:
More informationA Mild, Catalytic and Highly Selective Method for the Oxidation of α,β- Enones to 1,4-Enediones. Jin-Quan Yu, a and E. J.
A Mild, Catalytic and Highly Selective Method for the Oxidation of α,β- Enones to 1,4-Enediones Jin-Quan Yu, a and E. J. Corey b * a Department of Chemistry, Cambridge University, Cambridge CB2 1EW, United
More informationEnantioselective Conjugate Addition of 3-Fluoro-Oxindoles to. Vinyl Sulfone: An Organocatalytic Access to Chiral. 3-Fluoro-3-Substituted Oxindoles
Enantioselective Conjugate Addition of 3-Fluoro-Oxindoles to Vinyl Sulfone: An Organocatalytic Access to Chiral 3-Fluoro-3-Substituted Oxindoles Xiaowei Dou and Yixin Lu * Department of Chemistry & Medicinal
More informationSupporting Information
Meyer, Ferreira, and Stoltz: Diazoacetoacetic acid Supporting Information S1 2-Diazoacetoacetic Acid, an Efficient and Convenient Reagent for the Synthesis of Substituted -Diazo- -ketoesters Michael E.
More informationHai-Bin Yang, Xing Fan, Yin Wei,* Min Shi*
Electronic Supplementary Material (ESI) for Organic Chemistry Frontiers. This journal is the Partner Organisations 2015 Solvent-controlled Nucleophilic Trifloromethylthiolation of Morita- Baylis-Hillman
More informationAziridine in Polymers: A Strategy to Functionalize Polymers by Ring- Opening Reaction of Aziridine
Electronic Supplementary Material (ESI) for Polymer Chemistry. This journal is The Royal Society of Chemistry 2015 Electronic Supplementary Information (ESI) Aziridine in Polymers: A Strategy to Functionalize
More informationFast and Flexible Synthesis of Pantothenic Acid and CJ-15,801.
Fast and Flexible Synthesis of Pantothenic Acid and CJ-15,801. Alan L. Sewell a, Mathew V. J. Villa a, Mhairi Matheson a, William G. Whittingham b, Rodolfo Marquez a*. a) WestCHEM, School of Chemistry,
More informationFormal Total Synthesis of Optically Active Ingenol via Ring-Closing Olefin Metathesis
Formal Total Synthesis of Optically Active Ingenol via Ring-Closing Olefin Metathesis Kazushi Watanabe, Yuto Suzuki, Kenta Aoki, Akira Sakakura, Kiyotake Suenaga, and Hideo Kigoshi* Department of Chemistry,
More informationSupplementary Information (Manuscript C005066K)
Supplementary Information (Manuscript C005066K) 1) Experimental procedures and spectroscopic data for compounds 6-12, 16-19 and 21-29 described in the paper are given in the supporting information. 2)
More informationSupporting Information
Supporting Information Organocatalytic Enantioselective Formal Synthesis of Bromopyrrole Alkaloids via Aza-Michael Addition Su-Jeong Lee, Seok-Ho Youn and Chang-Woo Cho* Department of Chemistry, Kyungpook
More informationSupporting Information. Enantioselective Organocatalyzed Henry Reaction with Fluoromethyl Ketones
Supporting Information Enantioselective Organocatalyzed Henry Reaction with Fluoromethyl Ketones Marco Bandini,* Riccardo Sinisi, Achille Umani-Ronchi* Dipartimento di Chimica Organica G. Ciamician, Università
More informationPhotochemical Nickel-Catalyzed C-H Arylation: Synthetic Scope and Mechanistic Investigations
Photochemical Nickel-Catalyzed C-H Arylation: Synthetic Scope and Mechanistic Investigations Drew R. Heitz, John C. Tellis, and Gary A. Molander* Roy and Diana Vagelos Laboratories, Department of Chemistry,
More informationSUPPORTING INFORMATION
SUPPORTING INFORMATION For Synthesis of Fluorenone Derivatives through Palladium-Catalyzed Dehydrogenative Cyclization Hu Li, Ru-Yi Zhu, Wen-Juan Shi, Ke-Han He, and Zhang-Jie Shi* Beijing National Laboratory
More informationSupporting Information
Electronic Supplementary Material (ESI) for ChemComm. This journal is The Royal Society of Chemistry 2017 Supporting Information Palladium-Catalyzed Oxidative Allylation of Bis[(pinacolato)boryl]methane:
More informationElectronic Supplementary Material (ESI) for Medicinal Chemistry Communications This journal is The Royal Society of Chemistry 2012
Supporting Information. Experimental Section: Summary scheme H 8 H H H 9 a H C 3 1 C 3 A H H b c C 3 2 3 C 3 H H d e C 3 4 5 C 3 H f g C 2 6 7 C 2 H a C 3 B H c C 3 General experimental details: All solvents
More informationAnion binding vs. sulfonamide deprotonation in functionalised ureas
S Anion binding vs. sulfonamide deprotonation in functionalised ureas Claudia Caltagirone, Gareth W. Bates, Philip A. Gale* and Mark E. Light Supplementary information Experimental Section General remarks:
More informationSUPPLEMENTARY INFORMATION
Supplementary Method Synthesis of 2-alkyl-MPT(R) General information (R) enantiomer of 2-alkyl (18:1) MPT (hereafter designated as 2-alkyl- MPT(R)), was synthesized as previously described 1, with some
More informationSupporting Information
Electronic Supplementary Material (ESI) for RSC Advances. This journal is The Royal Society of Chemistry 2017 Supporting Information Lithium Triethylborohydride-Promoted Generation of α,α-difluoroenolates
More informationSupporting Information
Supporting Information SmI 2 -Mediated Carbon-Carbon Bond Fragmentation in α-aminomethyl Malonates Qiongfeng Xu,, Bin Cheng, $, Xinshan Ye,*, and Hongbin Zhai*,,,$ The State Key Laboratory of Natural and
More informationSupporting Information
An Improved ynthesis of the Pyridine-Thiazole Cores of Thiopeptide Antibiotics Virender. Aulakh, Marco A. Ciufolini* Department of Chemistry, University of British Columbia 2036 Main Mall, Vancouver, BC
More informationSupporting Information
Electronic Supplementary Material (ESI) for Organic Chemistry Frontiers. This journal is the Partner Organisations 2017 Supporting Information Direct copper-catalyzed oxidative trifluoromethylthiolation
More informationPhil S. Baran*, Jeremy M. Richter and David W. Lin SUPPORTING INFORMATION
Direct Coupling of Pyrroles with Carbonyl Compounds: Short, Enantioselective Synthesis of (S)-Ketorolac Phil S. Baran*, Jeremy M. Richter and David W. Lin SUPPRTIG IFRMATI General Procedures. All reactions
More informationSupporting Information for Exploration of C H and N H-bond functionalization towards 1-(1,2-diarylindol-3-yl)- tetrahydroisoquinolines
Supporting Information for Exploration of C H and N H-bond functionalization towards 1-(1,2-diarylindol-3-yl)- tetrahydroisoquinolines Michael Ghobrial, Marko D. Mihovilovic and Michael Schnürch* Address:
More informationPhotooxidations of 2-(γ,ε-dihydroxyalkyl) furans in Water: Synthesis of DE-Bicycles of the Pectenotoxins
S1 Photooxidations of 2-(γ,ε-dihydroxyalkyl) furans in Water: Synthesis of DE-Bicycles of the Pectenotoxins Antonia Kouridaki, Tamsyn Montagnon, Maria Tofi and Georgios Vassilikogiannakis* Department of
More informationSingapore, #05 01, 28 Medical Drive, Singapore. PR China,
Electronic Supplementary Material (ESI) for Chemical Science. This journal is The Royal Society of Chemistry 2017 Catalyst controlled Regioselectivity in Phosphine Catalysis: Synthesis of Spirocyclic Benzofuranones
More informationSupporting Information for
Page of 0 0 0 0 Submitted to The Journal of Organic Chemistry S Supporting Information for Syntheses and Spectral Properties of Functionalized, Water-soluble BODIPY Derivatives Lingling Li, Junyan Han,
More informationEfficient Pd-Catalyzed Amination of Heteroaryl Halides
1 Efficient Pd-Catalyzed Amination of Heteroaryl Halides Mark D. Charles, Philip Schultz, Stephen L. Buchwald* Department of Chemistry, Massachusetts Institute of Technology, Cambridge, MA 02139 Supporting
More informationRegioselective Silylation of Pyranosides Using a Boronic Acid / Lewis Base Co-Catalyst System
Regioselective Silylation of Pyranosides Using a Boronic Acid / Lewis Base Co-Catalyst System Doris Lee and Mark S. Taylor* Department of Chemistry, Lash Miller Laboratories, University of Toronto 80 St.
More information[(NHC)Au I ]-Catalyzed Acid Free Hydration of Alkynes at Part-Per-Million Catalyst Loadings
SUPPORTING INFORMATION [(NHC)Au I ]-Catalyzed Acid Free Hydration of Alkynes at Part-Per-Million Catalyst Loadings Nicolas Marion, Rubén S. Ramón, and Steven P. Nolan Institute of Chemical Research of
More informationCatalytic Conversion of Diazocarbonyl Compounds to Ketocarbonyl Compounds by 2,6-Dichloropyridine-N-oxide. China Corresponding Author
Supporting Information for: Displacement of Dinitrogen by Oxygen: A Methodology for the Catalytic Conversion of Diazocarbonyl Compounds to Ketocarbonyl Compounds by 2,6-Dichloropyridine-N-oxide Yang Yu,
More informationPractical Synthesis of -oxo benzo[d]thiazol sulfones: Scope and Limitations
Electronic Supplementary Information Practical Synthesis of -oxo benzo[d]thiazol sulfones: Scope and Limitations Jiří Pospíšil,* Raphaël Robiette, Hitoshi Sato and Kevin Debrus Institute of Condensed Matter
More informationExpedient Synthesis of α-(2-azaheteroaryl) Acetates via the Addition of Silyl Ketene Acetals to Azine-N-oxides
Expedient Synthesis of α-(2-azaheteroaryl) Acetates via the Addition of Silyl Ketene Acetals to Azine-N-oxides Allyn T. Londregan*, Kristen Burford, Edward L. Conn and Kevin D. Hesp. TABLE OF CONTENTS
More informationSynthesis and nucleophilic aromatic substitution of 3- fluoro-5-nitro-1-(pentafluorosulfanyl)benzene
Supporting Information for Synthesis and nucleophilic aromatic substitution of 3- fluoro-5-nitro-1-(pentafluorosulfanyl)benzene Javier Ajenjo 1, Martin Greenhall 2, Camillo Zarantonello 2 and Petr Beier
More informationhydroxyanthraquinones related to proisocrinins
Supporting Information for Regiodefined synthesis of brominated hydroxyanthraquinones related to proisocrinins Joyeeta Roy, Tanushree Mal, Supriti Jana and Dipakranjan Mal* Address: Department of Chemistry,
More informationRecyclable Enamine Catalysts for Asymmetric Direct Cross-Aldol
Recyclable Enamine Catalysts for Asymmetric Direct Cross-Aldol Reaction of Aldehydes in Emulsion Media Qiang Gao, a,b Yan Liu, a Sheng-Mei Lu, a Jun Li a and Can Li* a a State Key Laboratory of Catalysis,
More information