Current progress in DARS model development for CFD
|
|
- Arlene Lang
- 5 years ago
- Views:
Transcription
1 Current progress in DARS model development for CFD Harry Lehtiniemi STAR Global Conference 2012 Netherlands 20 March 2012
2 Application areas Automotive DICI SI PPC Fuel industry Conventional fuels Natural gas Dual fuel Biofuels Synthetic fuels Environment Soot control NOx formation Unburned hydrocarbons Heavy, energy and chemical industries: Power generation Gas turbines Flames and burners Chemical vapor deposition 2
3 Outline Aspects of chemistry choice Models for on-line chemistry calculation DARS-CFD DARS-TIF New developments for tabulated chemistry in CFD Progress variable model (PVM) ECFM-3Z-TKI Flamelet source term library approach updates Concluding remarks 3
4 Outline Aspects of chemistry choice Models for on-line chemistry calculation DARS-CFD DARS-TIF New developments for tabulated chemistry in CFD Progress variable model (PVM) ECFM-3Z-TKI Flamelet source term library approach updates Concluding remarks 4
5 Aspects of chemistry choice Pressure Temperature Reactor Fuel 4 Mpa 700 K Const P N-heptane 5
6 Key Features of DARS-FUEL mechanisms Reduced stiffness Methodology to reduce the stiffness of a mechanism -> short computational time, even with detailed models Compact even in detailed format Only species which are important for the decomposition of the fuel are included Multiple formats The mechanisms are available in various formats Libraries for CFD software Pre-compiled libraries for direct use in simulations Compatibility with STAR-CD/CCM+ products Consistency Reaction Names Thermodynamic data Transport properties 6
7 Key Features of DARS-FUEL mechanisms Good documentation Rule based Semi Automatic Generation* Mechanism generation for larger alkanes based on rules Rules tested against several alkanes Extrapolation to fuels without experimental base Automatic graph theory based generation -> efficient and less error prone Soot and NOx Integrated modeling of soot precursors Integrated coupling to NOx formation Complete solution From mechanism development to table generation From detailed reaction schemes to highly reduced, special purpose mechanisms Constant development Constant improvement and development of new models *M. Hilbig, L. Seidel, X. Wang, F. Mauss, and T. Zeuch. Computer aided detailed mechanism generation for large hydrocarbons: n- decane. 23rd ICDERS,
8 Available DARS-FUEL mechanisms Group Chemistry Reference fuel for Oxygenated methanol, ethanol, propanol Gasoline, Biofuels Mono-aromatics toluene, m-xylene Gasoline, Diesel, Jet Large aromatics 1-methylnaphalene Diesel, Jet Linear alkanes n-heptane, n-decane Gasoline, Diesel, Jet Branched alkanes iso-butane, iso-butane, iso-pentane, iso-octane, iso-dodecane Gasoline, Diesel, Jet Methylester methyldecanoate Biodiesel (RME/SME) Dimethylether Other Emission DME methane, ethane, propane, butane, pentane, neo-pentane, ethylene, acetylene, propene, hydrogen and others NOx, soot, formaldehyde, unburnt HC and others Natural gas, Biomass to gas / liquid, turbines Combined for all fuels 8
9 Outline Aspects of chemistry choice Models for on-line chemistry calculation DARS-CFD DARS-TIF New developments for tabulated chemistry in CFD Progress variable model (PVM) ECFM-3Z-TKI Flamelet source term library approach updates Concluding remarks 9
10 On-line chemistry DARS-CFD & DARS-TIF Ease of setup One-panel setup for complex fuel chemistries GUI support for setup Easy to Use Fast Accurate Combustion and emissions Detailed chemistry mechanisms Tailored size reduced chemistry Methods based on real physics A complete range of models adding chemistry information to: IC Engines cylinder processes Gas emissions, Soot After-treatment Fuels Flames and burners Chemical vapor deposition Coverage Mechanisms optimized to affordable sizes 10
11 Modeling with online chemistry Main approaches for online chemistry in 3D CFD with STAR-CD/CCM+ and DARS models: DARS-TIF: diesel engine application DARS-CFD: generic species transport model Library based emission models can be coupled with both DARS-TIF, DARS-CFD or other combustion models 11
12 Online chemistry - enhancements DARS-CFD Load balancing Improved scalability Lower CPU cost Clustering Method allows for cluster selection based on any parameters Number of clusters determined on-line based on user set tolerances Gradient based Lower CPU cost DARS-TIF Solver enhancement Speed-up: % PDF integration Speed-up: 30 % Improved scalar dissipation rate treatment Ignition and emission prediction improvement Improved PDF treatment Ignition and emission prediction improvement 12
13 Clustering method prel. test results Pressure trace Full chemistry vs. cell clustering CPU time scaling vs. # cells Number of active clusters versus number of particles User defined cluster parameters: Entropy, enthalpy, enthalpy of formation, mixture fraction, any species Evaluated for DARS SRM: SI engine : 3-4 times faster DI engine: times faster 13
14 Outline Aspects of chemistry choice Models for on-line chemistry calculation DARS-CFD DARS-TIF New developments for tabulated chemistry in CFD Progress variable model (PVM) ECFM-3Z-TKI Flamelet source term library approach updates Concluding remarks 14
15 What tables and for which models Model PVM PVM/G/TIF Table Auto-ignition Auto-ignition, Laminar flame speed, Species at 95 % burned ECFM-3Z-TKI Auto-ignition ECFM Laminar flame speed Soot NOx Soot source term flamelet table NOx source term flamelet table 15
16 Chemistry requirements Auto-ignition The chemistry must capture low- and high temperature ignition chemistry for a wide range of conditions Laminar flame speed The chemistry must be validated for a wide range of operating conditions Emission modeling The chemistry must properly capture both minor and major species profiles for a wide range of operating conditions The chemistry must work properly with PAH formation sub-model (important for soot source term tables) The chemistry must work properly with NOx formation sub-model (important for NOx source term tables) 16
17 Outline Aspects of chemistry choice Models for on-line chemistry calculation DARS-CFD DARS-TIF New developments for tabulated chemistry in CFD Progress variable model (PVM) ECFM-3Z-TKI Flamelet source term library approach updates Concluding remarks 17
18 Homogeneous Progress Variable for AI Progress variable: h 298 (chemical enthalpy) Reflects the conversion from chemical energy to thermal energy The following is solved for the progress variable: ρ h ρvh t 298 = ρ D + D t h ρω chem + ρω spray D t calculated using turbulent viscosity and Schmidt number internally DARS solver solves ρψ = ρω t chem ω spray : Spray term is derived using chemical enthalpy, continuity and mixture fraction transport No active scalars Z, Zvar, Xi, YEGR, h298, soot + NOx (transport) Species of interest (internal) for output can be retrieved from the table 18
19 Library generation procedure Flamelet-like resolution in mixture fraction space (101 points) Loop over FFEGR, EGR, P, T ox, Z, Xi with constant fuel side temperature Steps of 5 % in EGR, EGR composition as stoichiometric combustion products, up to 50 % EGR (mole fraction) Logarithmic stepping in P Equidistant stepping in T ox, same for all EGR values Steps of 5 % in Xi (mass fraction since mass fraction Xi transported) Progress variable: h points selected adaptively The PV tables contain: h298 source term NASA polynomial coefficients and mean molecular weight Species (needed for TIF initialization) and species source terms Table for one fuel contains about 1 GB of data 19
20 Temperature [K] PRF 95 gasoline PV library Accuracy Progress variable model vs. detailed chemistry, 0D reactor P = 32 bar, T = 733 K, Z = 0.062, EGR = 0 %, Constant pressure Excellent accuracy dt = 1e-6 s ( RPM) dt = 5e-5 s ( RPM) 2500 PV-TABLE Online Chemistry 2500 PV-TABLE Online Chemistry Time [s] Time [s] 20
21 PRF 95 gasoline PV library HCCI SRM DARS SRM is used to evaluate libraries 21
22 STAR-CD / es-ice test case for PRF 95 CI Passenger car CI engine configuration Bore/stroke: 81/93 mm Compression ratio: 16 P / CA -120: 1.5 bar / 500 K Single, m inj,tot 19.2 mg, block profile, SOI CA 22 BTDC, EOI CA 14 BTDC Fuel: Gasoline (PRF 95 iso-octane/n-heptane PV table) EGR: 0 % Numerics: Standard k/epsilon turbulence model PISO MARS for momentum, turbulence, enthalpy and scalars (only passive scalars defined) CD for density Homogeneous PV model used as combustion model 22
23 STAR-CD / es-ice test case for PRF 95 CI Pressure Temperature 23
24 STAR-CD / es-ice test case for PRF 95 CI Mixture fraction and temperature 24
25 Outline Aspects of chemistry choice Models for on-line chemistry calculation DARS-CFD DARS-TIF New developments for tabulated chemistry in CFD Progress variable model (PVM) ECFM-3Z-TKI Flamelet source term library approach updates Concluding remarks 25
26 ECFM-3Z-TKI tables New ECFM-3Z-TKI tables Progress variable defined using h 298 (chemical enthalpy) New progress variable sampling to better resolve ignition process We found it was not possible to only use only 7 points for c, To have accuracy, 15 points between 0 and 1 are used. It is possible to enter the table with c=0 like in the PV model Analytical solver written for progress variable update step Knowing the shape of the progress variable source term function it is possible to directly update the progress variable given the CFD time step size 26
27 ECFM-3Z-TKI Progress variable solver Pressure: 40 bar, Tunb: 800 K, Z: 6.22e-2, PRF 95 27
28 ECFM-3Z-TKI Tabulation aspects Single fuel table (PRF 95) Temperature: 101 points between 600 K and 1600 K Pressure: 8 points between 10 bar and 80 bar Mixture fraction points: 6 points depending on stoichiometry EGR points: 5 values between 0 % and 90 % EGR Temperature segregation: 21 values between 0 and 1 Around 60 MB data Dual fuel table (ethanol-gasoline mixtures) Temperature: 41 points between 600 K and 1600 K Pressure: 11 points between 10 bar and 200 bar Mixture fraction points: 16 points depending on stoichiometry EGR points: 5 values between 0 % and 90 % EGR Temperature segregation: 21 values between 0 and 1 Fuel composition points: 11 values between 0 and 1 (fraction ethanol) Around 400 MB data 28
29 Outline Aspects of chemistry choice Models for on-line chemistry calculation DARS-CFD DARS-TIF New developments for tabulated chemistry in CFD Progress variable model (PVM) ECFM-3Z-TKI Flamelet source term library approach updates Concluding remarks 29
30 Flamelet source term library approach 30
31 Concluding remarks DARS-FUEL Consistency Accuracy DARS-CFD & DARS-TIF Continuous development to lower CPU cost Tabulated chemistry development PVM development & coupling with G/TIF Consistency between progress variables in PVM & ECFM New solver developments for tabulation methods assure correct prediction of autoignition timing New methodology for emission source term library production 31
32 DARS models for STAR-CD/CCM+ Method Description Application STAR-CD STAR- CCM+ DARS CFD Direct integration of chemistry Species transport General gas phase chemistry, combustion Surface - gas phase interaction x x DARS TIF Transient flamelet solver Diesel engine modeling x Flame speed library Calculated with DARS Basic using detailed chemistry Any combustion model requiring laminar flame speed G-equation ECFM PCFM Flamelet library Calculated with DARS Basic using detailed chemistry Any presumed PDF model PPDF Soot NOx PPDF PCFM NOx AI tables Calculated with DARS Basic using detailed cemistry PVM ECFM-3Z-TKI x x 32
Efficient Engine CFD with Detailed Chemistry
www.cd-adapco.com Efficient Engine CFD with Detailed Chemistry Harry Lehtiniemi and Rajesh Rawat CD-adapco Karin Fröjd and Fabian Mauss Digital Analysis of Reaction Systems Challenges in CFD engine modeling
More informationDARS overview, IISc Bangalore 18/03/2014
www.cd-adapco.com CH2O Temperatur e Air C2H4 Air DARS overview, IISc Bangalore 18/03/2014 Outline Introduction Modeling reactions in CFD CFD to DARS Introduction to DARS DARS capabilities and applications
More informationCombustion and Emission Modeling in CONVERGE with LOGE models
Combustion and Emission Modeling in CONVERGE with LOGE models Corinna Netzer, Harry Lehtiniemi and Fabian Mauss 2015 CONVERGE USER CONFERENCE RICHARD CHILDRESS RACING, WELCOME, NC Outline Objective LOGE
More informationDARS Digital Analysis of Reactive Systems
DARS Digital Analysis of Reactive Systems Introduction DARS is a complex chemical reaction analysis system, developed by DigAnaRS. Our latest version, DARS V2.0, was released in September 2008 and new
More informationOverview of Turbulent Reacting Flows
Overview of Turbulent Reacting Flows Outline Various Applications Overview of available reacting flow models LES Latest additions Example Cases Summary Reacting Flows Applications in STAR-CCM+ Ever-Expanding
More informationOverview of Reacting Flow
Overview of Reacting Flow Outline Various Applications Overview of available reacting flow models Latest additions Example Cases Summary Reacting Flows Applications in STAR-CCM+ Chemical Process Industry
More informationA first investigation on using a species reaction mechanism for flame propagation and soot emissions in CFD of SI engines
A first investigation on using a 1000+ species reaction mechanism for flame propagation and soot emissions in CFD of SI engines F.A. Tap *, D. Goryntsev, C. Meijer, A. Starikov Dacolt International BV
More informationConditional Moment Closure With a Progress Variable Approach
Conditional Moment Closure With a Progress Variable Approach Harry Lehtiniemi* 1, Anders Borg 1, and Fabian Mauss 2 1 Lund Combustion Engineering LOGE AB, Scheelevägen 17, SE-22370 Lund,
More informationReacting Flow Modeling in STAR-CCM+ Rajesh Rawat
Reacting Flow Modeling in STAR-CCM+ Rajesh Rawat Latest Additions (v 7.02/v 7.04) Eulerian Multi-phase Reaction Model Soot Model Moment Methods PPDF Flamelet Multi-stream model Complex Chemistry Model
More informationStructure, Extinction, and Ignition of Non-Premixed Flames in the Counterflow Configuration
Structure, Extinction, and Ignition of Non-Premixed Flames in the Counterflow Configuration Ryan Gehmlich STAR Global Conference 2013 Orlanda, Florida March 18-20 1 Outline Background Developing Reaction
More informationTransported PDF Calculations of Combustion in Compression- Ignition Engines
International Multidimensional Engine Modeling User s Group Meeting at the SAE Congress Detroit, MI 15 April 2013 Transported PDF Calculations of Combustion in Compression- Ignition Engines V. Raj Mohan
More informationThe Combination of Detailed Kinetics and CFD in Automotive Applications
The Combination of Detailed Kinetics and CFD in Automotive Applications J. M. Deur and S. Jonnavithula Analysis and Design Application Co., Ltd. Melville, New York E. Meeks Reaction Design San Diego, California
More informationA wide range kinetic modelling study of laminar flame speeds of reference fuels and their mixtures
A wide range kinetic modelling study of laminar flame speeds of reference fuels and their mixtures A. Frassoldati, R. Grana, A. Cuoci, T. Faravelli, E. Ranzi Dipartimento di Chimica, Materiali e Ingegneria
More informationLecture 9 Laminar Diffusion Flame Configurations
Lecture 9 Laminar Diffusion Flame Configurations 9.-1 Different Flame Geometries and Single Droplet Burning Solutions for the velocities and the mixture fraction fields for some typical laminar flame configurations.
More informationDetailed Chemical Kinetics in Multidimensional CFD Using Storage/Retrieval Algorithms
13 th International Multidimensional Engine Modeling User's Group Meeting, Detroit, MI (2 March 23) Detailed Chemical Kinetics in Multidimensional CFD Using Storage/Retrieval Algorithms D.C. Haworth, L.
More informationComputer Aided Detailed Mechanism Generation for Large Hydrocarbons: n-decane
23 rd ICDERS July 24 29, 2011 Irvine, USA Computer Aided Detailed Mechanism Generation for Large Hydrocarbons: n-decane Martin Hilbig 1, Lars Seidel 1, Xiaoxiao Wang 1, Fabian Mauss 1 and Thomas Zeuch
More informationCombustion. Indian Institute of Science Bangalore
Combustion Indian Institute of Science Bangalore Combustion Applies to a large variety of natural and artificial processes Source of energy for most of the applications today Involves exothermic chemical
More informationSpark Ignition Engine Combustion
Spark Ignition Engine Combustion MAK 652E Reduced Mechanisms and Autoignition Prof.Dr. Cem Soruşbay Istanbul Technical University - Automotive Laboratories Contents Problem statement Methods of reducing
More informationNumerical Simulation of Hydrogen Gas Turbines using Flamelet Generated Manifolds technique on Open FOAM
Numerical Simulation of Hydrogen Gas Turbines using Flamelet Generated Manifolds technique on Open FOAM Alessio Fancello (M.Sc.) Department of Mechanical Engineering Combustion Technology Technische Universiteit
More informationFuel, Air, and Combustion Thermodynamics
Chapter 3 Fuel, Air, and Combustion Thermodynamics 3.1) What is the molecular weight, enthalpy (kj/kg), and entropy (kj/kg K) of a gas mixture at P = 1000 kpa and T = 500 K, if the mixture contains the
More informationAdvanced Turbulence Models for Emission Modeling in Gas Combustion
1 Advanced Turbulence Models for Emission Modeling in Gas Combustion Ville Tossavainen, Satu Palonen & Antti Oksanen Tampere University of Technology Funding: Tekes, Metso Power Oy, Andritz Oy, Vattenfall
More informationStrategies for Using Detailed Kinetics in Engine Simulations
Strategies for Using Detailed Kinetics in Engine Simulations Ellen Meeks ERC Symposium: Fuels for Future IC Engines June 6-7, 2007 Madison, Wisconsin Outline Role of simulation in design Importance of
More informationSimulation of Selective Catalytic Reduction using DARS 1D Tool
Simulation of Selective Catalytic Reduction using DARS 1D Tool Best Practice Training: Combustion & Chemical Reaction Modeling STAR Global Conference 2013 Karin Fröjd & Adina Tunér LOGE AB Outline Introduction
More informationModelling of Gasoline Combustion using ECFM-3Z With STAR-CD V4 Investigation on spark modelling with AKTIM and Knock. Your subtitle goes here
Modelling of Gasoline Combustion using ECFM-3Z With STAR-CD V4 Investigation on spark modelling with AKTIM and Knock Your subtitle goes here TOPICS SI modelling with ECFM-3Z Fundamental and Numerics KNOCK
More informationLecture 8 Laminar Diffusion Flames: Diffusion Flamelet Theory
Lecture 8 Laminar Diffusion Flames: Diffusion Flamelet Theory 8.-1 Systems, where fuel and oxidizer enter separately into the combustion chamber. Mixing takes place by convection and diffusion. Only where
More informationA comparison between two different Flamelet reduced order manifolds for non-premixed turbulent flames
8 th U. S. National Combustion Meeting Organized by the Western States Section of the Combustion Institute and hosted by the University of Utah May 19-22, 2013 A comparison between two different Flamelet
More informationFarr High School. NATIONAL 5 CHEMISTRY Unit 2 Nature s Chemistry. Question Booklet (UPDATED MAY 2017)
Farr igh School NATIONAL 5 EMISTRY Unit 2 Nature s hemistry Question Booklet (UPDATED MAY 2017) 1 omologous Series 1. What is meant by a homologous series? 2. What is the general formula for the alkanes?
More informationAmounts of substances can be described in different ways. One mole of a substance is the relative formula mass in ...
Q1.This question is about atoms and isotopes. (a) Atoms contain protons, neutrons and electrons. A lithium atom has the symbol Explain, in terms of sub-atomic particles, why the mass number of this lithium
More informationMicro flow reactor with prescribed temperature profile
The First International Workshop on Flame Chemistry, July 28-29, 2012, Warsaw, Poland Micro flow reactor with prescribed temperature profile Toward fuel Indexing and kinetics study based on multiple weak
More informationWILLKOMMEN WELCOME VÄLKOMMEN BENVIDO BIENVENIDO VELKOMMEN DOBRO DOSLI KARIBU WELKOM BENVENUTO SELAMAT DATANG BIENVENUE CROESO SOO DHAWOW NAMASTE
WELCOME VÄLKOMMEN BIENVENIDO DOBRO DOSLI WELKOM SELAMAT DATANG CROESO NAMASTE WILLKOMMEN BENVIDO VELKOMMEN KARIBU BENVENUTO BIENVENUE SOO DHAWOW 2016 Convergent Science. All Rights Reserved Combustion
More informationCombustion Theory and Applications in CFD
Combustion Theory and Applications in CFD Princeton Combustion Summer School 2018 Prof. Dr.-Ing. Heinz Pitsch Copyright 201 8 by Heinz Pitsch. This material is not to be sold, reproduced or distributed
More informationNumerical Investigation of Ignition Delay in Methane-Air Mixtures using Conditional Moment Closure
21 st ICDERS July 23-27, 27 Poitiers, France Numerical Investigation of Ignition Delay in Methane-Air Mixtures using Conditional Moment Closure Ahmad S. El Sayed, Cécile B. Devaud Department of Mechanical
More informationFluorescence tracer technique for simultaneous temperature and equivalence ratio measurements in Diesel jets
Renewable energies Eco-friendly production Innovative transport Eco-efficient processes Sustainable resources Fluorescence tracer technique for simultaneous temperature and equivalence ratio measurements
More informationChemical Kinetics of HC Combustion
Spark Ignition Engine Combustion MAK65E Chemical Kinetics of HC Combustion Prof.Dr. Cem Soruşbay Istanbul Technical University Chemical Kinetics of HC Combustion Introduction Elementary reactions Multi-step
More informationAn Improved Representative Interactive Flamelet Model Accounting for Evaporation Effect in Reaction Space (RIF-ER) SeungHwan Keum
An Improved Representative Interactive Flamelet Model Accounting for Evaporation Effect in Reaction Space (RIF-ER) by SeungHwan Keum A dissertation submitted in partial fulfillment of the requirements
More informationAll organic compounds contain carbon, however, not all carbon containing compounds are classified as organic. Organic compounds covalently bonded
Chapter 20 All organic compounds contain carbon, however, not all carbon containing compounds are classified as organic. Organic compounds covalently bonded compounds containing carbon, excluding carbonates
More informationAME 436. Energy and Propulsion. Lecture 2 Fuels, chemical thermodynamics (thru 1st Law; 2nd Law next lecture)
AME 436 Energy and Propulsion Lecture 2 Fuels, chemical thermodynamics (thru 1st Law; 2nd Law next lecture Outline Ø Fuels - hydrocarbons, alternatives Ø Balancing chemical reactions Ø Stoichiometry Ø
More informationAP Chemistry A. Allan Chapter Six Notes - Thermochemistry
AP Chemistry A. Allan Chapter Six Notes - Thermochemistry 6.1 The Nature of Energy A. Definition 1. Energy is the capacity to do work (or to produce heat*) a. Work is a force acting over a distance (moving
More informationThe names and formulae of three hydrocarbons in the same homologous series are:... (1) Which homologous series contains ethane, propane and butane?
Q1. This question is about hydrocarbons. (a) The names and formulae of three hydrocarbons in the same homologous series are: Ethane C 2 H 6 Propane C 3 H 8 Butane C 4 H 10 The next member in the series
More informationUnit 2 Nature s Chemistry Question Booklet
Farr igh School NATIONAL 5 EMISTRY Unit 2 Nature s hemistry Question Booklet 1 omologous Series 1. What is meant by a homologous series? 2. What is the general formula for the alkanes? 3. opy and complete
More informationCombustion Chemistry of a New Biofuel: Butanol
Combustion Chemistry of a New Biofuel: Butanol William H. Green, D.F. Davidson, F. Egolfopoulos, N. Hansen, M. Harper, R.K. Hanson, S. Klippenstein, C.K. Law, C.J. Sung, D.R. Truhlar, & H. Wang Assessing
More informationANSYS Advanced Solutions for Gas Turbine Combustion. Gilles Eggenspieler 2011 ANSYS, Inc.
ANSYS Advanced Solutions for Gas Turbine Combustion Gilles Eggenspieler ANSYS, Inc. 1 Agenda Steady State: New and Existing Capabilities Reduced Order Combustion Models Finite-Rate Chemistry Models Chemistry
More informationDepartment of Mechanical Engineering BM 7103 FUELS AND COMBUSTION QUESTION BANK UNIT-1-FUELS
Department of Mechanical Engineering BM 7103 FUELS AND COMBUSTION QUESTION BANK UNIT-1-FUELS 1. Define the term fuels. 2. What are fossil fuels? Give examples. 3. Define primary fuels. Give examples. 4.
More informationCracking. 191 minutes. 186 marks. Page 1 of 27
3.1.6.2 Cracking 191 minutes 186 marks Page 1 of 27 Q1. (a) Gas oil (diesel), kerosine (paraffin), mineral oil (lubricating oil) and petrol (gasoline) are four of the five fractions obtained by the fractional
More informationLevel 1 Chemistry, 2014
90932 909320 1SUPERVISOR S Level 1 Chemistry, 2014 90932 Demonstrate understanding of aspects of carbon chemistry 9.30 am Wednesday 19 November 2014 Credits: Four Achievement Achievement with Merit Achievement
More informationLire la première partie de la thèse
Lire la première partie de la thèse Chapter 3 Dual-CM engine validation In this chapter, the dual-cm, developed in chapter 2, is validated against two types of results : experimental data from engine test-bench
More informationAE 205 Materials and Energy Balances Asst. Prof. Dr. Tippabust Eksangsri. Chapter 4 Stoichiometry and MB with Reactions
AE 205 Materials and Energy Balances Asst. Prof. Dr. Tippabust Eksangsri Chapter 4 Stoichiometry and MB with Reactions Stoichiometry Stoichiometry provides a quantitative means of relating the amount of
More informationExploring STAR-CCM+ Capabilities, Enhancements and Practices for Aerospace Combustion. Niveditha Krishnamoorthy CD-adapco
Exploring STAR-CCM+ Capabilities, Enhancements and Practices for Aerospace Combustion Niveditha Krishnamoorthy CD-adapco Outline Overview of modeling capability Applications, Practices and Enhancements
More informationA simplified CFD model for radiative heat transfer in engines
A simplified CFD model for radiative heat transfer in engines Chandan Paul, Daniel C. Haworth The Pennsylvania State University at International Multidimensional Engine Modeling Meeting Detroit, MI 48226
More informationFUNDAMENTALS OF THERMODYNAMICS
FUNDAMENTALS OF THERMODYNAMICS SEVENTH EDITION CLAUS BORGNAKKE RICHARD E. SONNTAG University of Michigan John Wiley & Sons, Inc. Chemical Reactions 15 Many thermodynamic problems involve chemical reactions.
More informationApplication of Model Fuels to Engine Simulation
Paper #E28 First published in: Topic: Engine 5 th US Combustion Meeting Organized by the Western States Section of the Combustion Institute and Hosted by the University of California at San Diego March
More informationModeling for Control of HCCI Engines
Modeling for Control of HCCI Engines Gregory M. Shaver J.Christian Gerdes Matthew Roelle P.A. Caton C.F. Edwards Stanford University Dept. of Mechanical Engineering D D L ynamic esign aboratory Outline
More informationQ1. (a) (i) Which acid should the student add to sodium hydroxide solution to make sodium sulphate? Formula:... (1)
Q1. (a) (i) Which acid should the student add to sodium hydroxide solution to make sodium sulphate?... acid (ii) Use the table on the Data Sheet to help you to write the formula of sodium sulphate. Formula:...
More informationDr Ali Jawarneh Department of Mechanical Engineering Hashemite University
Chapter 15 CHEMICAL REACTIONS Dr Ali Jawarneh Department of Mechanical Engineering Hashemite University 2 Objectives Give an overview of fuels and combustion. Apply the conservation of mass to reacting
More informationThe comprehensive modelling of n-heptane / iso-octane oxidation by a skeletal mechanism using the Chemistry Guided Reduction approach
The comprehensive modelling of n-heptane / iso-octane oxidation by a skeletal mechanism using the Chemistry Guided Reduction approach L. Seidel 1, F. Bruhn 1, S. S. Ahmed 1, G. Moréac 2, T. Zeuch 3*, and
More informationC11.1 Organic Chemistry Quiz Questions & Answers. Parts 1 & 2; all sets Parts 3 & 4; Sets 1 & 2 only
C11.1 Organic Chemistry Quiz Questions & Answers Parts 1 & 2; all sets Parts 3 & 4; Sets 1 & 2 only C11.1 Organic Chemistry Part 1 1. Define a mixture. 2. Define crude oil. 3. Define a hydrocarbon. 4.
More informationAssessment schedule 2017 Chemistry: Demonstrate understanding of aspects of carbon chemistry (90932)
NCEA Level 1 Chemistry (90932) 2017 page 1 of 5 Assessment schedule 2017 Chemistry: Demonstrate understanding of aspects of carbon chemistry (90932) Evidence Statement ONE (a) TWO correct structures. Correct
More informationDevelopment and Validation of a Turbulent Flame Propagation Model
Development and Validation of a Turbulent Flame Propagation Model Thesis for Master of Science by Simon Bjerkborn Lund Combustion Engineering LOGE AB and Physics Department Lund University Examiner: Carl-Erik
More informationExercises in Combustion Technology
Exercises in Combustion Technology Exercise 4: Turbulent Premixed Flames Turbulent Flow: Task 1: Estimation of Turbulence Quantities Borghi-Peters diagram for premixed combustion Task 2: Derivation of
More informationHierarchical approach
Chemical mechanisms Examine (i) ways in which mechanisms are constructed, (ii)their dependence on rate and thermodynamic data and (iii) their evaluation using experimental targets Copyright 2011 by Michael
More informationLES Approaches to Combustion
LES Approaches to combustion LES Approaches to combustion LES Approaches to Combustion W P Jones Department of Mechanical Engineering Imperial College London Exhibition Road London SW7 2AZ SIG on Combustion
More informationExperiment 5 Reactions of Hydrocarbons
Experiment 5 Reactions of ydrocarbons ydrocarbons are compounds that only contain carbon and hydrogen. ydrocarbons can be classified further by the type of bonds they contain. If a hydrocarbon contains
More informationTOPICAL PROBLEMS OF FLUID MECHANICS 97
TOPICAL PROBLEMS OF FLUID MECHANICS 97 DOI: http://dx.doi.org/10.14311/tpfm.2016.014 DESIGN OF COMBUSTION CHAMBER FOR FLAME FRONT VISUALISATION AND FIRST NUMERICAL SIMULATION J. Kouba, J. Novotný, J. Nožička
More informationNumerical modeling of auto-ignition of isolated fuel droplets in microgravity
Department of Chemistry, Materials, and Chemical Engineering Politecnico di Milano (Italy) A. Cuoci, A. Frassoldati, T. Faravelli and E. Ranzi Numerical modeling of auto-ignition of isolated fuel droplets
More informationFundamentals of Combustion
Fundamentals of Combustion Lec 3: Chemical Thermodynamics Dr. Zayed Al-Hamamre Content Process Heat Transfer 1-3 Process Heat Transfer 1-4 Process Heat Transfer 1-5 Theoretical and Excess Air Combustion
More informationAssessment Schedule 2015 Chemistry: Demonstrate understanding of aspects of carbon chemistry (90932)
NCEA Level 1 Chemistry (90932) 2015 page 1 of 6 Assessment Schedule 2015 Chemistry: Demonstrate understanding of aspects of carbon chemistry (90932) Evidence Statement Q Evidence Achievement Merit Excellence
More informationEffects of Hydrogen Addition on NOx Emissions in Hydrogen-Assisted Diesel Combustion
29 International Multidimensional Engine Modeling Users Group Meeting Detroit, MI, 19 April 29 Abstract Effects of Hydrogen Addition on NOx Emissions in Hydrogen-Assisted Diesel Combustion H. Zhang, G.K.
More informationIgnition delay-time study of fuel-rich CH 4 /air and CH 4 /additive/air mixtures over a wide temperature range at high pressure
25 th ICDERS August 2 7, 2015 Leeds, UK Ignition delay-time study of fuel-rich CH 4 /air and CH 4 /additive/air mixtures over a wide temperature range at high pressure Jürgen Herzler, Mustapha Fikri, Oliver
More informationMolecular and Chemical Formulas
Molecular and Chemical Formulas Atoms combine (bond) to form molecules. Each molecule has a chemical formula. The chemical formula indicates which atoms are found in the molecule, and in what proportion
More informationCFD modeling of combustion of a natural gas Light-Duty Engine
Available online at www.sciencedirect.com Energy Procedia 00 (2018) 000 000 www.elsevier.com/locate/procedia 73rd Conference of the Italian Thermal Machines Engineering Association (ATI 2018), 12-14 September
More informationDevelopment of One-Step Chemistry Models for Flame and Ignition Simulation
Development of One-Step Chemistry Models for Flame and Ignition Simulation S.P.M. Bane, J.L. Ziegler, and J.E. Shepherd Graduate Aerospace Laboratories California Institute of Technology Pasadena, CA 91125
More informationEFFECT OF N-BUTANOL ADDITION ON SOOT FORMATION OF N- HEPTANE IN A MICRO FLOW REACTOR WITH A CONTROLLED TEMPERATURE PROFILE
EFFECT OF N-BUTANOL ADDITION ON SOOT FORMATION OF N- HEPTANE IN A MICRO FLOW REACTOR WITH A CONTROLLED TEMPERATURE PROFILE Mohd Hafidzal Bin Mohd Hanafi 1, Hisashi Nakamura 1, Takuya Tezuka 1 and Kaoru
More informationNational 5 Chemistry. Unit 2: Nature s Chemistry. Topic 1 Hydrocarbons
St Ninian s High School Chemistry Department National 5 Chemistry Unit 2: Nature s Chemistry Topic 1 Hydrocarbons Summary Notes Name Learning Outcomes After completing this topic you should be able to
More informationBalancing chemical reaction equations (stoichiometry)
Balancing chemical reaction equations (stoichiometry) This worksheet and all related files are licensed under the Creative Commons Attribution License, version 1.0. To view a copy of this license, visit
More informationErratum to: High speed mixture fraction and temperature imaging of pulsed, turbulent fuel jets auto igniting in high temperature, vitiated co flows
DOI 10.1007/s00348-015-2101-9 ERRATUM Erratum to: High speed mixture fraction and temperature imaging of pulsed, turbulent fuel jets auto igniting in high temperature, vitiated co flows Michael J. Papageorge
More informationTurbulent Premixed Combustion
Turbulent Premixed Combustion Combustion Summer School 2018 Prof. Dr.-Ing. Heinz Pitsch Example: LES of a stationary gas turbine velocity field flame 2 Course Overview Part II: Turbulent Combustion Turbulence
More informationGestão de Sistemas Energéticos 2017/2018
Gestão de Sistemas Energéticos 2017/2018 Exergy Analysis Prof. Tânia Sousa taniasousa@tecnico.ulisboa.pt Conceptualizing Chemical Exergy C a H b O c enters the control volume at T 0, p 0. O 2 and CO 2,
More information2. Methanol can be synthesized by combining carbon monoxide and hydrogen. H rxn = 90.7 kj
Chemistry 30 Final Review Question Carousel 1. Give the IUPAC name for the following compound: 1. ANSWER: B A. 4-ethenyl-5-ethyl-4-methyl-5-phenyldecane B. 4-ethyl-3-methyl-5-phenyl-3-propylnon-l-ene C.
More informationSimulation of soot formation and analysis of the "Advanced soot model" parameters in an internal combustion engine
Simulation of soot formation and analysis of the "Advanced soot model" parameters in an internal combustion engine Marko Ban, dipl. ing.* Power Engineering Department Faculty of Mechanical Engineering
More informationUnderstanding catalytic LEL combustible gas sensor performance
: Understanding catalytic LEL combustible gas sensor performance These four conditions are frequently diagrammed as the "Fire Tetrahedron". If any side of the tetrahedron is missing, incomplete or insubstantial;
More informationDNS and LES of Turbulent Combustion
Computational Fluid Dynamics In Chemical Reaction Engineering IV June 19-24, 2005 Barga, Italy DNS and LES of Turbulent Combustion Luc Vervisch INSA de Rouen, IUF, CORIA-CNRS Pascale Domingo, Julien Réveillon
More informationChapter 15. In the preceding chapters we limited our consideration to CHEMICAL REACTIONS. Objectives
Chapter 15 CHEMICAL REACTIONS In the preceding chapters we limited our consideration to nonreacting systems systems whose chemical composition remains unchanged during a process. This was the case even
More informationA G-equation Combustion Model Incorporating Detailed Chemical Kinetics for PFI/DI SI Engine Simulations
Sixteenth International Multidimensional Engine Modeling User s Group Meeting at the SAE Congress, April 2, 2006, Detroit, Michigan A G-equation Combustion Model Incorporating Detailed Chemical Kinetics
More informationReactive Flows using TransAT. June 2013 Jan van Rickenbach, Daniel Rakotonirina ASCOMP
Reactive Flows using TransAT June 2013 Jan van Rickenbach, Daniel Rakotonirina ASCOMP www.ascomp.ch jan@ascomp.ch Model portfolio Reactive flows Infinitely Fast Chemistry (non-premixed) EDC EDC-SDT (Scalar
More informationSimulation of Turbulent Lifted Flames and their Transient Propagation
25 th ICDERS August 2-7th, 2015 Leeds, UK Simulation of Turbulent Lifted Flames and their Transient Propagation S. Ruan, Z. Chen, N. Swaminathan University of Cambridge Cambridge, UK 1 Introduction Turbulent
More informationPredicting NO Formation with Flamelet Generated Manifolds
Predicting NO Formation with Flamelet Generated Manifolds J. A. van Oijen and L. P. H. de Goey Dept. Mechanical Engineering, Technische Universiteit Eindhoven P.O. Box, 6 MB Eindhoven, The Netherlands
More informationIntroduction Flares: safe burning of waste hydrocarbons Oilfields, refinery, LNG Pollutants: NO x, CO 2, CO, unburned hydrocarbons, greenhouse gases G
School of Process, Environmental and Materials Engineering Computational study of combustion in flares: structure and emission of a jet flame in turbulent cross-flow GERG Academic Network Event Brussels
More informationUQ in Reacting Flows
UQ in Reacting Flows Planetary Entry Simulations High-Temperature Reactive Flow During descent in the atmosphere vehicles experience extreme heating loads The design of the thermal protection system (TPS)
More informationTowards regime identification and appropriate chemistry tabulation for computation of autoigniting turbulent reacting flows
Center for Turbulence Research Annual Research Briefs 009 199 Towards regime identification and appropriate chemistry tabulation for computation of autoigniting turbulent reacting flows By M. Kostka, E.
More informationThermochemistry X.S. Bai Thermochemistry
Lecture 2 Thermochemistry Design a power plant X.S. Bai Thermochemistry When we study a combustion device, what do we want to know? heat generated power production combustion efficiency combustion control
More informationSoot formation in turbulent non premixed flames
Soot formation in turbulent non premixed flames A. Cuoci 1, A. Frassoldati 1, D. Patriarca 1, T. Faravelli 1, E. Ranzi 1, H. Bockhorn 2 1 Dipartimento di Chimica, Materiali e Ing. Chimica, Politecnico
More informationOrganic Compounds - Formation Fate and Impact on Troposphere
Organic Compounds - Formation Fate and Impact on Troposphere i.gensch@fz-juelich.de 2 / 20 Organic Compounds - Formation Fate and Impact on Troposphere i.gensch@fz-juelich.de 2 / 20 Definitions VOC: organic
More informationEFFECTS OF ETHANOL ADDITION ON SOOT PARTICLES DYNAMIC EVOLUTION IN ETHYLENE/AIR LAMINAR PREMIXED FLAME
THERMAL SCIENCE: Year 08, Vol., No., pp. 9-50 9 EFFECTS OF ETHANOL ADDITION ON SOOT PARTICLES DYNAMIC EVOLUTION IN ETHYLENE/AIR LAMINAR PREMIXED FLAME Introduction by Mingrui WEI a,b, Song LI a,b, Jinping
More informationFUNDAMENTALS of Thermodynamics
SOLUTION MANUAL SI UNIT PROBLEMS CHAPTER 15 SONNTAG BORGNAKKE VAN WYLEN FUNDAMENTALS of Thermodynamics Sixth Edition CONTENT SUBSECTION PROB NO. Correspondence table Concept-Study Guide Problems 1-20 Equilibrium
More informationExperimental and modeling study of the pyrolysis and combustion of dimethoxymethane
Experimental and modeling study of the pyrolysis and combustion of dimethoxymethane Florence Vermeire, Hans-Heinrich Carstensen, Olivier Herbinet, Frédérique Battin-Leclerc, Guy B. Marin and Kevin M. Van
More informationChemical Kinetic Reaction Mechanisms
Chemical Kinetic Reaction Mechanisms Charles Westbrook Lawrence Livermore National Laboratory May 31, 2008 J. Warnatz Memorial Colloquium How do we measure a career? In scientific careers, we look for
More informationFirst Application of the Flamelet Generated Manifold (FGM) Approach to the Simulation of an Igniting Diesel Spray
First Application of the Flamelet Generated Manifold (FGM) Approach to the Simulation of an Igniting Diesel Spray C. Bekdemir, L.M.T. Somers, L.P.H. de Goey Mechanical Engineering, Eindhoven University
More informationChapter 3: STOICHIOMETRY: MASS, FORMULAS, AND REACTIONS
Chapter 3: STOICHIOMETRY: MASS, FORMULAS, AND REACTIONS Problems: 3.1-3.8, 3.11, 3.14-3.90, 3.103-3.120, 3.122-3.125, 3.128-3.131, 3.134, 3.137-36.138, 3.140-3.142 3.2 THE MOLE Stoichiometry (STOY-key-OM-e-tree):
More informationCombustion: Flame Theory and Heat Produced. Arthur Anconetani Oscar Castillo Everett Henderson
Combustion: Flame Theory and Heat Produced Arthur Anconetani Oscar Castillo Everett Henderson What is a Flame?! Reaction Zone! Thermo/Chemical characteristics Types of Flame! Premixed! Diffusion! Both
More information(a)more volume that that of an ideal gas under identical conditions. (b)less volume that that of an ideal gas under identical conditions
1 A flask filled with vapor weight at a temperature and pressure The flask was then filled with oxygen at the same temperature and pressure The mass of vapors would be about (a) the same as that of the
More information