CHEMICAL MEDIA TABLE OF CONTENS: IN THIS ISSUE. Issue #
|
|
|
- Barrie O’Brien’
- 5 years ago
- Views:
Transcription
1 Issue # CHEMICAL MEDIA TABLE OF CONTENS: IN THIS ISSUE Chemissorban - Media CP Blend - Media Odorcarb Ultra Media Chemisorbant media is engineered to provide an enhanced oxidation potential, generating 99.5% initial removal efficiency in Purafil systems. Odormix - SP - Media 50:50 volume blend of Chemisorbant and Purakol. Chemisorbant media is impregnated with potassium permanganate to provide optimum adsorption, absorption and oxidation of a wide variety of gaseous contaminants. Puracarb - Media Highly effective at removing 0.30 grams (g) of odorous hydrogen sulfide gas (H2S) per cubic centimeter (cc) of media. IAQ - Media Odormix SP is a chemical media. It eliminates a broad range of odors and is often used in the final or polishing stage of filtration. Designed for neutralization of chlorine, hydrogen sulfide and sulfur dioxide, this media is manufactured specifically for the corrosive environments and consists of generally spherical, porous pellets. IAQ Media consists of extruded cylindrical, porous pellets formed from a high quality virgin activated carbon.
2 2 PRODUCT BULLETIN FOR - PURAFIL CHEMISORBANT MEDIA - Purafil Chemisorbant Media consists of generally spherical, porous pellets formed from a combination of activated alumina and other binders, suitably impregnated with potassium permanganate (KMnO4). The potassium permanganate is applied during pellet formation such that it is uniformly distributed throughout the pellet volume and is completely available for reaction with target gases. Purafil Chemisorbant Media has been specially engineered to provide an enhanced oxidation potential thus assuring the highest overall performance. The chemisorptive process removes contaminant gases by means of adsorption, absorption, and chemical reaction (oxidation). Harmful gases are trapped within the pellet and converted into harmless solids which remain in the pellet, eliminating the possibility of desorption and release back into the environment. Purafil Chemisorbant Media demonstrates a higher working capacity for broad-spectrum contaminant control in applications where there are undefined sources such as: outdoor air cleaning, general odor control, and off-gassing from building materials and office furnishings. This media is often used with Purakol media to provide broad-spectrum contaminant control. Purafil Chemisorbant media provides the following minimum removal capacities: Each lot of Purafil Chemisorbant media is thoroughly tested prior to shipment according to the procedures described in Purafil s ISO 9001 Quality Systems Manual. This testing includes but is not limited to: bulk density, potassium permanganate content, moisture content, crush strength, and abrasion. Media Life Analysis Samples of Purafil Chemisorbant media should be sent on a regular basis to the Purafil laboratories for testing to determine remaining media life. This provides for scheduled maintenance, avoids downtime, and assures ongoing protection for processes, products, and personnel. Purafil Chemisorbant media should be disposed of according to local, state, and federal guidelines. Purafil Chemisorbant media is UL 900 classified for flammability.
3 3 PRODUCT BULLETIN FOR - PURAFIL CP BLEND MEDIA - Purafil CP Blend Media is made from an equal mix (by volume) of Purafil Chemisorbant and Purakol media. Purafil Chemisorbant media is generally spherical, porous pellets formed from a combination of activated alumina and other binders, suitably impregnated with potassium permanganate (KMnO4). The sodium permanganate is applied during pellet formation such that it is uniformly distributed throughout the pellet volume and is completely available for reaction with target gases. Purakol media consists of extruded cylindrical, porous pellets formed from a premium virgin activated carbon. No binders are used allowing the carbon completely available for adsorption of target gases. Purafil CP Blend Media has been specially engineered to provide the highest overall performance against multiple contaminants. Purafil Chemisorbant removes contaminant gases by chemisorption using adsorption, absorption, and chemical reaction (oxidation). Harmful gases are trapped within the pellet and converted into harmless solids which remain in the pellet, eliminating the possibility of desorption and release back into the environment. Purakol media removes contaminant gases with high efficiencies and capacities by means of physical adsorption (physisorption). It is very effective against medium-to-high molecular weight compounds, and chemical contaminants with low volatility. Purafil CP Blend Media demonstrates a higher working capacity for broad-spectrum control of odorous and corrosive gases including hydrocarbons, volatile organic compounds (VOCs), oxides of sulfur, formaldehyde, nitrogen oxides, hydrogen sulfide, and lower molecular weight aldehydes and organic acids. Purafil CP Blend media can be used when space within a Purafil chemical filtration system is limited but these two individual media are indicated; combining two stages of filtration into one. Purafil CP Blend is also recommended as a polishing media in odor control and corrosion control applications. Purafil CP Blend media provides the following minimum removal capacities: Each lot of Purafil Chemisorbant and Purakol media used in Purafil CP Blend media is thoroughly tested prior to shipment according to the procedures described in Purafil s ISO 9001 Quality Systems Manual. Media Life Analysis Samples of Purafil CP Blend media should be sent on a regular basis to the Purafil laboratories for testing to determine remaining media life. This provides for scheduled maintenance, avoids downtime, and assures ongoing protection for processes, products, and personnel. Purafil CP Blend media should be disposed of according to local, state, and federal guidelines. Purafil CP Blend media is UL classified for flammability.
4 4 PRODUCT BULLETIN FOR - PURAFIL ODORCARB ULTRA MEDIA - OdorcarbTM Ultra Media consists of generally spherical, porous pellets formed from a combination of activated carbon, activated alumina and other binders, suitably impregnated to provide a superior removal capacity for hydrogen sulfide (H2S). Impregnants are applied during pellet formation such that they are uniformly distributed throughout the pellet volume and are completely available for reaction with hydrogen sulfide. Odorcarb Ultra Media has been specially engineered with an extremely high reserve alkalinity. This provides the maximum neutralization potential available and assures the highest overall performance. The chemisorptive process removes contaminant gases by means of adsorption, absorption, and chemical reaction (neutralization). Harmful gases are trapped within the pellet and converted into harmless solids which remain in the pellet, eliminating the possibility of desorption and release back into the environment. Odorcarb Ultra Media demonstrates an extremely high working capacity for H2S making it the preferred media for odor control in wastewater treatment plants, pump stations, wet wells, lift stations, and sludge holding tanks. Odorcarb Ultra media provides the following minimum removal capacities: Each lot of Odorcarb Ultra media is thoroughly tested prior to shipment according to the procedures described in Purafil s ISO 9001 Quality Systems Manual. This testing includes but is not limited to: bulk density, impregnation level, moisture content, crush strength, and abrasion. Media Life Analysis Odorcarb Ultra media contains Media Life Indicator Pellets (patent-pending) which offer a visual indication of media performance, changing from blue to white when the media is spent. At this point samples of Odorcarb Ultra media should be sent to the Purafil laboratories for testing to verify remaining media life. This provides for scheduled maintenance, avoids downtime, and assures ongoing protection for processes, products, and personnel. Odorcarb Ultra media is non-toxic and non-hazardous as supplied. However, in all cases spent Odorcarb Ultra media should be disposed of according to local, state, and federal guidelines. Odorcarb Ultra media is UL classified for flammability.
5 5 PRODUCT BULLETIN FOR - PURAFIL ODORMIX SP MEDIA - Odormix SP Media is made from an equal mix (by volume) of Purafil s Odoroxidant SP media and Odorkol media. Odoroxidant SP media is generally spherical, porous pellets formed from a combination of activated alumina and other binders, suitably impregnated with sodium permanganate (NaMnO4). The sodium permanganate is applied during pellet formation such that it is uniformly distributed throughout the pellet volume and is completely available for reaction with target gases. Odorkol media consists of extruded cylindrical, porous pellets formed from a premium virgin activated carbon. No binders are used allowing the carbon completely available for adsorption of target gases. Odormix SP Media has been specially engineered to provide the highest overall performance against multiple contaminants. Odoroxidant SP removes contaminant gases by chemisorption using adsorption, absorption, and chemical reaction (oxidation). Harmful gases are trapped within the pellet and converted into harmless solids which remain in the pellet, eliminating the possibility of desorption and release back into the environment. Odorkol media removes contaminant gases with high efficiencies and capacities by means of physical adsorption (physisorption). It is very effective against medium-to-high molecular weight compounds, and chemical contaminants with low volatility. Each lot of Odoroxidant SP and Odorkol media used in Odormix SP media is thoroughly tested prior to shipment according to the procedures described in Purafil s ISO 9001 Quality Systems Manual. Media Life Analysis Samples of Odormix SP media should be sent on a regular basis to the Purafil laboratories for testing to determine remaining media life. This provides for scheduled maintenance, avoids downtime, and assures ongoing protection for processes, products, and personnel. Odormix SP media should be disposed of according to local, state, and federal guidelines. Purafil s Odormix SP media is UL classified for flammability.
6 6 PRODUCT BULLETIN FOR - PURAFIL PURACARB MEDIA - Puracarb Media consists of generally spherical, porous pellets formed from a combination of activated carbon, activated alumina and other binders, suitably impregnated to provide an enhanced removal capacity for acid gases and other corrosive contaminants in industrial environments. Impregnants are applied during pellet formation such that they are uniformly distributed throughout the pellet volume and are completely available for reaction with target gases. Puracarb Media demonstrates a higher working capacity for enhanced control of acid gases in corrosive environments such as pulp & paper mills, refineries, chemical plants, steel mills, aluminum smelters, for the protection of sensitive electronic process control equipment and to protect plant personnel in case of an accidental spill or release. Puracarb media provides the following minimum removal capacities: Puracarb Media has been specially engineered to provide an enhanced neutralization potential due to a high reserve alkalinity, thus assuring the highest overall performance. The chemisorptive process removes contaminant gases by means of adsorption, absorption, and chemical reaction (neutralization). Harmful gases are trapped within the pellet and converted into harmless solids which remain in the pellet, eliminating the possibility of desorption and release back into the environment. Each lot of Puracarb media is thoroughly tested prior to shipment according to the procedures described in Purafil s ISO 9001 Quality Systems Manual. This testing includes but is not limited to: bulk density, impregnation level, moisture content, crush strength, and abrasion. Media Life Analysis Samples of Puracarb media should be sent on a regular basis to the Purafil laboratories for testing to determine remaining media life. This provides for scheduled maintenance, avoids downtime, and assures ongoing protection for processes, products, and personnel. Puracarb media is non-toxic and non-hazardous as supplied. However, in all cases spent Puracarb media should be disposed of according to local, state, and federal guidelines. Puracarb media is UL 900 classified for flammability
7 7 PRODUCT BULLETIN FOR - PURAFIL IAQ MEDIA - IAQ Media consists of extruded cylindrical, porous pellets formed from a high quality virgin activated carbon. It is then impregnated with specially formulated compounds to enhance its filtration power. IAQ Media has been engineered to provide an enhanced adsorptive capacity, assuring the highest overall performance. The chemisorptive process removes contaminant gases by means of adsorption, absorption, and chemical reaction. Harmful gases are trapped within the pellet and converted into harmless solids which remain in the pellet, eliminating the possibility of desorption and release back into the environment. It is designed to be particularly effective against formaldehyde and other VOC contaminants, which are a primary concern for indoor air quality applications. IAQ Media demonstrates a higher working capacity in applications where multiple contaminant gases are present such as: formaldehyde, volatile organic compounds (VOCs) and other emissions from building materials, office furnishings, and human bioeffluents. Ideal in indoor environments or household air purifiers, IAQ media provides the following minimum removal capacities: Each lot of IAQ media is thoroughly tested prior to shipment according to the procedures described in Purafil s ISO 9001 Quality Systems Manual. This testing includes but is not limited to: CTC activity, hardness, bulk density, moisture content, and ash. IAQ media should be disposed of according to local, state, and federal guidelines.
8 8 CHEMICAL MEDIA PT. INDO UTAMA SERVICES The reliable innovate engineering company Sequis Center 8 th Floor Jalan Jenderal Sudirman No. 71 Jakarta Selatan Indonesia Ph : Fax : indoutama@indoutama.com, Branch Office Bandung Jl. Pelajar Pejuang 45 No. 80 Ph : Fax : Pekanbaru Jl. Jendral Sudirman Blok. B No. 18 Mobile:
Application. Air : Food :
Application Activated Carbon, Activated Charcoal, and Related Product Applications Water : POU/POE Groundwater remediation Wastewater treatment Process water treatment Municipal water treatment Aquarium
Alumina & Pseudoboehmite & Molecular sieve
Activated Alumina & Activated alumina, Pseudoboehmite & Molecular sieve Pseudoboehmite & Molecular sieve Quality and advanced Technology About XiangRun Catalyst & Adsorbent Why Choose Xiangrun? Zibo XiangRun
Achieving Your Indoor Air Quality Goals: Which Filtration System Works Best?
Achieving Your Indoor Air Quality Goals: Which Filtration System Works Best? Christopher O. Muller Co-Chair TC 2.3, Chair SPC 145P William G. England INTRODUCTION It is well known that outdoor air pollution
Organic Polymer Feeding
Organic Polymer A successful Nalco polymer program requires the appropriate equipment to efficiently make up and feed the polymer. The feed equipment selected for a certain application depends on the polymer
2Fe 2 O 3 +3H 2 S FeS+FeS x +S+3H 2 O
Elemental analysis of hydrocarbon streams using Dry colorimetry analyzers, a catalyst saviour Bushra Dawood, Application Coordinator C.I. Analytics www.cianalytics.com The Petrochemical industry has refined
Mol- 1. Mol Practice. 1. How many particles of sucrose are in 3.5 moles of sucrose? Molecules of sucrose.
Mol Practice 1. How many particles of sucrose are in 3.5 moles of sucrose? Molecules of sucrose. 2. Determine the number of atoms in 2.50 moles of Zn. 3. Given 3.25 mol AgNO 3, determine the number of
Adsorption of Hg 0 on the Unburned Carbon with HF Acid Leaching
Journal of Minerals & Materials Characterization & Engineering, Vol. 3, No.1, pp 41-51, 24 jmmce.org Printed in the USA. All rights reserved Adsorption of Hg on the Unburned Carbon with HF Acid Leaching
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 16000-24 First edition 2009-12-15 Indoor air Part 24: Performance test for evaluating the reduction of volatile organic compound (except formaldehyde) concentrations by sorptive
Shanghai Jiuzhou Chemicals Co. Ltd was established in 2005.Over the years Jiuzhou has always adhered to the quality control, innovation principles,
Jing an Shanghai Jiuzhou Chemicals Co. Ltd was established in 2005.Over the years Jiuzhou has always adhered to the quality control, innovation principles, committed to the development, research, manufacturing
January 19, 2012, Workshop on Chemical Data Reporting (CDR) Rule Case Studies for Byproduct/Recycling Reporting
January 19, 2012, Workshop on Chemical Data Reporting (CDR) Rule Case Studies for Byproduct/Recycling Reporting Scenario 1 In its operations, ABC Company uses an etchant to strip copper off of a substrate.
CHEMICAL OXIDATION TECHNIQUES FOR THE IN SITU REMEDIATION OF HYDROCARBON IMPACTED SOILS
CHEMICAL OXIDATION TECHNIQUES FOR THE IN SITU REMEDIATION OF HYDROCARBON IMPACTED SOILS Cheryl Kluck and Gopal Achari Center for Environmental Engineering Research and Education (CEERE) University of Calgary
BASU. Healthcare. Knowledge brings the greatest benefit
BASU Healthcare Knowledge brings the greatest benefit Knowledge brings the greatest benefit BASU is a privately owned company in Austria. We design and manufacture high quality products using simple reagents.
Cyanide: The Molecule and Its Analysis A Simple Compound with Complex Problems Part 2: Cyanide Sample Collection, Pretreatment and Preservation
Cyanide: The Molecule and Its Analysis A Simple Compound with Complex Problems Part 2: Cyanide Sample Collection, Pretreatment and Preservation Edward F. Askew PhD Askew Scientific Consulting The first
Glossary of Common Laboratory Terms
Accuracy A measure of how close a measured value is to the true value. Assessed by means of percent recovery of spikes and standards. Aerobic Atmospheric or dissolved oxygen is available. Aliquot A measured
2B Technologies, Inc. An InDevR Company
2B Technologies, Inc. An InDevR Company Technical Note No. 40 UV-Absorbing Interferences in Ozone Monitors Date: 22 April 2015 Author: John Birks Background Ozone measurements by absorbance of the 253.7-nm
Oxidation Power of Various Reactive Species (Chlorine=1) Oxidation Power of Various Reactive Species (Chlorine=1)
In order to fully understand photo-catalytic oxidation we must first learn a little about the metal catalyst involved (Titanium in our case). Titanium has been stated as being light, strong and anti-corrosive,
Elements and Their Oxides
Elements and Their Oxides An oxide is a. Oxides can form when an element reacts with oxygen, often in air. This reaction can be rapid with the release of a great deal of energy, as in the combustion of
Chemical Safety. Peter Yeung D.G. Manager. Safety Office The University of Hong Kong
Chemical Safety Peter Yeung D.G. Manager Safety Office The University of Hong Kong Lesson Learned 1. Laboratory fire 2. Chemical spill 3. Incompatibles in waste disposal Lab. Fire Sodium/Solvent Chemical
7/8/2013. What is GHS?
What is GHS? 0 Globally Harmonized System of Classification and Labeling of Chemicals 0 A standardized approach to classifying and labeling chemicals based on hazards 0 A United Nations program meant to
Zirconium in Organic Applications
Zirconium in Organic Applications INTRODUCTION Laboratory studies and case histories have established zirconium as the most corrosion resistant material of construction in many production methods involving
OSH in Medical Laboratory
OSH in Medical Laboratory Mr. K K LEUNG M(OSH) HRD HAHO Induction Program for Newly Recruited AMT 28 March 2008 Contents 1. Ordinance and Regulations 2. HA Safety Manuals 3. Chemical Safety 4. Biological
CE 370. Disinfection. Location in the Treatment Plant. After the water has been filtered, it is disinfected. Disinfection follows filtration.
CE 70 Disinfection 1 Location in the Treatment Plant After the water has been filtered, it is disinfected. Disinfection follows filtration. 1 Overview of the Process The purpose of disinfecting drinking
ABB Analytical ORP/pH Chemical and mining
White paper ABB Analytical ORP/pH Chemical and mining ORP, like ph, a valuable measure of where a reaction stands This document outlines six real-world ORP applications, in non-technical style, that will
Drillox Technology. Technology Covered by Patent Application
Drillox Technology Technology Covered by Patent Application Presentation Outline Calcium Peroxide Properties The Drillox Technology Principle Comparison with other oxidants Testing protocol Lab studies
Experiment 5 Reactions of Hydrocarbons
Experiment 5 Reactions of ydrocarbons ydrocarbons are compounds that only contain carbon and hydrogen. ydrocarbons can be classified further by the type of bonds they contain. If a hydrocarbon contains
Product Guide HIGH SILICA ZEOLITE
Product Guide HIGH SILICA ZEOLITE OUR HISTORY Union Showa K.K. was founded as a joint venture between Showa Denko K.K. and Union Carbide in 1970. Union Showa K.K. built a new plant in Yokkaichi in Mie
Volatile Organic Compounds (VOCs) Removal of Polluted Air Streams Using Ozone in The Presence of Porous Silica Bed
Australian Journal of Basic and Applied Sciences, 5(12): 1738-1743, 11 ISSN 1991-8178 Volatile Organic Compounds (VOCs) Removal of Polluted Air Streams Using Ozone in The Presence of Porous Silica Bed
Research and Development on European Cleaning Solutions for Radioactive Applications. Clean air solutions
Research and Development on European Cleaning Solutions for Radioactive Applications Dipl. Ing. Axel Mahler, R&D Director Europe, Camfil AB, Sweden 19.03.2014 Your speaker: Axel Mahler, R&D Director Europe
HAZCOM - Training
HAZCOM - Training 1910.1200 1 The OSHA HazCom Standard The Right-To-Know SDS (Safety Data Sheets) Chemical Listings Labels and Warnings Notifying Employees of Workplace Hazardous Chemical Locations (authorized
M A T E R I A L S A F E T Y D A T A S H E E T Page 1 of 5
M A T E R I A L S A F E T Y D A T A S H E E T Page 1 of 5 1. Product And Company Identification Supplier Manufacturer 703 Westmoreland Drive 703 Westmoreland Drive Tupelo, MS 38801 USA Tupelo, MS 38801
CEE 371 Water and Wastewater Systems
Updated: 22 November 2009 CEE 371 Water and Wastewater Systems Print version Lecture #23 Drinking Water Treatment: Ion Exchange, Adsorption & Arsenic Reading: Chapter 7, pp.262-266 David Reckhow CEE 371
Sampling. Information is helpful in implementing control measures for reducing pollutant concentration to acceptable levels
Types of pollutant sampling and measurement: Air quality monitoring: Sampling and measurement of air pollutants generally known, as air quality monitoring. It is an integral component of any air pollution
3. Chemical industry. Because of their modular design, the instruments in the TOC-L series can be equipped for any possible measurement
3. Chemical industry The most commonly used compound in the chemical industry is water not only as a solvent in processing, but also as an energy carrier in the cooling or heating cycle. As vast amounts
Compact Orifice FlowMeter
Steam Data Reference Tables IM/OM/SDT Issue 1 Compact Orifice FlowMeter ABB The Company We are an established world force in the design and manufacture of instrumentation for industrial process control,
WESTERN CONNECTICUT STATE UNIVERSITY CHEMICAL STORAGE AND COMPATIBILITY GUIDELINES PROCEDURE S-118
WESTERN CONNECTICUT STATE UNIVERSITY CHEMICAL STORAGE AND COMPATIBILITY GUIDELINES PROCEDURE S-118 Issued 6/4/02 Please direct any questions or comments about the applicability of this document to Luigi
R&D on adsorption processing technology using pitch activated carbon fiber
1999D.4.1.1 R&D on adsorption processing technology using pitch activated carbon fiber 1. Contents of empirical research With respect to waste water, exhausts and other emissions in the petroleum refining
Oxygen Demand, Chemical
Oxygen Demand, Chemical DOC316.53.01104 USEPA Reactor Digestion Method Method 10212 250 to 15,000 mg/l COD (UHR) TNTplus 823 Scope and application: For wastewater and process waters; digestion is required.
Oxygen Demand, Chemical
Oxygen Demand, Chemical DOC316.53.01103 USEPA Reactor Digestion Method Method 10211 1 to 60 mg/l COD (ULR) TNTplus 820 Scope and application: For wastewater, process water, surface water, and cooling water.
Chapter 3 Matter and Energy
Introductory Chemistry, 3 rd Edition Nivaldo Tro Matter and Energy The chapter opening (page 52) showing a room and highlighting the structure of water and the carbon atoms in a graphite tennis racket
CHEMISTRY 130 General Chemistry I OXIDATION-REDUCTION CHEMISTRY
CHEMISTRY 130 General Chemistry I OXIDATION-REDUCTION CHEMISTRY A solution of potassium permanganate is pink. [1] Color changes can often be used to monitor chemical reactions. DEPARTMENT OF CHEMISTRY
Chemical Segregation and Storage Guide
Chemical Segregation and Storage Guide This resource developed by LabCentral for the Pagliuca Harvard Life Lab Revision 1, Effective Dec 13, 2016 Table of Contents 1.0 PURPOSE AND SCOPE...3 2.0 CLASSES
Classification of Mystery Substances
Classification of Mystery Substances This document supports the safety activity Mystery Substance Identification: The Identification of Unlabeled Chemicals Found on School Premises from Flinn Scientific.
Product Stewardship Summary
1801 U.S. Highway 52 West West Lafayette, IN 47906 +1-765-497-6100 +1-800-428-7947 Product Stewardship Summary Anhydrous Hydrogen Bromide Anhydrous hydrogen bromide is primarily used in two types of applications:
BGSU s Guide to Chemical Storage
BGSU s Guide to Chemical Storage Environmental Health & Safety 372-2171 Chemical Storage Guidlines General Guidelines Store dry chemicals on shelves. Store flammables together. Use approved flammable storage
Hazard Communication for Dangerous and Harmful Materials
Hazard Communication for Dangerous and Harmful Materials Yu-Li Huang Department of Safety, Health and Environmental Engineering National Kaohsiung First University of Science & Technology 1 Outline Overview
RS DYNAMICS ECOPROBE 5. Portable IR/PID Gas Analyzer PID. PID and IR Analyzers
RS DYNAMICS ECOPROBE 5 Portable IR/PID Gas Analyzer PID + IR PID and IR Analyzers General ECOPROBE 5 has two autonomous analyzers in one case. The combination of analyzers provides a set of data designed
CENTRAL LABORATORY. Sl. No. Type of sampling Charges in Rs. 1. GRAB SAMPLING:
E-mail: centrallab@ospcboard.org Website : www.ospcboard.org CENTRAL LABORATORY STATE POLLUTION CONTROL BOARD, ODISHA [DEPARTMENT OF FOREST & ENVIRONMENT, GOVERNMENT OF ODISHA] Plot B-59/2 & 59/3, Chandaka
Chemistry Chapter 9. Unit 6 Stoichiometry
Chemistry Chapter 9 Unit 6 Stoichiometry The arithmetic of equations Equations are recipes. They tell chemists what amounts of reactants to mix and what amounts of products to expect. What is Stoichiometry?
Application Note S/SL
Analysis of Ultra low Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence according to ASTM D Ultra low detection limits Excellent Sensitivity, Repeatability &
Sight Glass and Moisture Indicator Virginia KMP Series LDE
Sight Glass and Moisture Indicator Virginia KMP LDE DIMENSIONS: Dimension Dimension Connection Type "A" "B" Inches (mm) Inches (mm) LDE2 1/4 Male X 1/4 Male 2-7/8 72 1-7/ 36 LDE2S 1/4 Sweat X 1/4 Sweat
Questions, Myths and Misconceptions about Using Photoionization Detectors
Questions, Myths and Misconceptions about Using Photoionization Detectors Solvent, fuel and other VOC vapours are pervasively common in many workplace environments. Increased awareness of the toxicity
Test Booklet. Subject: SC, Grade: HS 2009 End of Course Chemistry. Student name:
Test Booklet Subject: SC, Grade: HS 2009 End of Course Chemistry Student name: Author: Virginia District: Virginia Released Tests Printed: Tuesday April 23, 2013 1 Which of these would be best to measure
WRITING AP EQUATIONS
WRITING AP EQUATIONS AP equation sets are found in the free-response section of the AP test. You get three equations to complete. The equations are of mixed types. The section is worth 15 points and is
Water Soluble Polymers For Industrial Water Treatment Applications
Water Soluble Polymers For Industrial Water Treatment Applications Presented By Technical Sales Jim Millard Course Objectives Explain what water soluble polymers are. Describe the 4 physical forms commonly
Marquette University Effective: 5/21/02 Hazard Communication Program Updated: 03/11/09 Revision No.: 1 Page: 1
Marquette University Effective: 5/21/02 Hazard Communication Program Updated: 03/11/09 Revision No.: 1 Page: 1 Introduction: The Occupational Safety & Health Administration (OSHA) Hazard Communication
May 16, The Atom (A Nitrogen Atom is Depicted Here)
The Atom (A Nitrogen Atom is Depicted Here) 1 Important points to remember about the atom: 1. Protons and neutrons are in the nucleus. 2. Electrons are distributed around the nucleus within well-defined
Safety Data Sheet. 1. Identification of the Substance/Mixture and the Supplier. 2. Hazards Identification
Safety Data Sheet 1. Identification of the Substance/Mixture and the Supplier Supplier : National Institute of Advanced Industrial Science and Technology (AIST) Address : 1-3-1 Kasumigaseki, Chiyoda, Tokyo,
Obtaining sorbents from brown coals samples of Kharanorskoe coal deposit by way of electromagnetic microwave radiation exposure
Obtaining sorbents from brown coals samples of Kharanorskoe coal deposit by way of electromagnetic microwave radiation exposure Elena Vorsina *, Tatiana Moskalenko and Valerii Mikheev Mining Institute
Assembly and Maintenance manual according to regulation DIN 82079
Assembly and Maintenance manual according to regulation DIN 82079 ESORB Version 4.16 Part 1 Information to the manufacturer Giebel FilTec GmbH Carl-Zeiss-Str. 5 DE-74626 Bretzfeld-Schwabbach Tel. +49 (0)
R&D on Technology of Reducing Environmental Load Through Long-Life FCC Catalyst
2001.M2.1.1 R&D on Technology of Reducing Environmental Load Through Long-Life FCC Catalyst (FCC Long-life Group) Nobuki Sekine, Hidenori Yamada, Tadashi Shibuya,Kenji Nagai, Junko Naito 1. Contents of
CH0302 Process Instrumentation. Lecture 9 Composition Analysis
CH0302 Process Instrumentation Lecture 9 Composition Analysis Department of Chemical Engineering School of Bioengineering SRM University Kattankulathur 603203 4/3/15 Chemical Engineering 1 Industrial significance
Physical Separations and Chromatography
Lab #5A & B: Physical Separations and Chromatography Individual Objectives: At the end of these experiments you should be able to: Ø Distinguish between Rf and tr; chromatograph and chromatogram; adsorption
Inertization Effects on the Explosion Parameters of Different Mix Ratios of Ethanol and Toluene Experimental Studies
111 This article is available in PDF-format, in colour, at: www.wydawnictwa.ipo.waw.pl/materialy-wysokoenergetyczne.html Materiały Wysokoenergetyczne / High-Energetic Materials, 2016, 8, 111 117 ISSN 2083-0165
Sodium Hypochlorite Solution, 10-16%
Chemical Identity Product Safety Summary for Sodium Hypochlorite Solution, 10-16% Name: Sodium Hypochlorite CAS number: 7681-52-9 Synonyms: Bleach, Hypo Chemical Formula: NaOCl Product Uses Trinity Manufacturing,
Methods of pollution control and waste management - laboratory. Adsorptive removal of volatile organic compounds from gases streams
Methods of pollution control and waste management - laboratory Adsorptive removal of volatile organic compounds from gases streams Manual for experiment 17 dr Hanna Wilczura-Wachnik and dr inż. Jadwiga
SO 2 Removal by Using Jordanian Oil Shale Ash
Abstract SO Removal by Using Jordanian Oil Shale Ash Adnan Al-Harahsheh 1 and Reyad Shawabkah 7 th Oil Shale Symposium 15-17 October, 7 1- Institute of Earth & Environmental Sciences, Al al-bayt University,
IDENTIFYING UNKNOWN CHEMICALS IN SCIENCE LABS
IDENTIFYING UNKNOWN CHEMICALS IN SCIENCE LABS When a chemical or solution has not been labeled, was improperly labeled, or its label has deteriorated, become obscured or illegible, it becomes an unknown.
EXECUTIVE SUMMARY. especially in last 50 years. Industries, especially power industry, are the large anthropogenic
EXECUTIVE SUMMARY Introduction The concentration of CO 2 in atmosphere has increased considerably in last 100 years, especially in last 50 years. Industries, especially power industry, are the large anthropogenic
Activity 31. Activity 32
Activity 30 1. Which water sample tasted best to you, and why? 2. would you spend the extra money on bottled spring water, after your taste-test experience? Why or why not? 3. Some people might disagree
CHEMISTRY 130 General Chemistry I OXIDATION-REDUCTION CHEMISTRY
CHEMISTRY 130 General Chemistry I OXIDATION-REDUCTION CHEMISTRY A solution of potassium permanganate is pink. [1] Color changes can often be used to monitor chemical reactions. DEPARTMENT OF CHEMISTRY
Nanoscale Materials and Their Properties Teacher Guide Unit 2: Metallic and Ionic Nanoparticle
Nanoscale Materials and Their Properties Teacher Guide Unit 2: Metallic and Ionic Nanoparticles: Extendable Structures Objectives for Metallic and Ionic Nanoparticles: Extendable Structures Lesson Objectives:
Phosphorus, Total. USEPA 1 PhosVer 3 with Acid Persulfate Digestion Method Method to 3.50 mg/l PO. Test preparation
Phosphorus, Total DOC316.53.01121 USEPA 1 PhosVer 3 with Acid Persulfate Digestion Method Method 8190 0.06 to 3.50 mg/l PO 3 4 (0.02 to 1.10 mg/l P) Test N Tube Vials Scope and application: For water,
HAZARD COMMUNICATION PROGRAM
HAZARD COMMUNICATION PROGRAM UNIVERSITY RISK MANAGEMENT Occupational Safety and Health Programs 19 Hagood Avenue, Suite 908 Charleston SC 29425 843-792-3604 Revised: January, 2015 TABLE OF CONTENTS Safety
ION Pumps for UHV Systems, Synchrotrons & Particle Accelerators. Mauro Audi, Academic, Government & Research Marketing Manager
ION Pumps for UHV Systems, Synchrotrons & Particle Accelerators Mauro Audi, Academic, Government & Research Marketing Manager ION Pumps Agilent Technologies 1957-59 Varian Associates invents the first
SULFUR DIOXIDE REMOVAL
Report No. 63 A SULFUR DIOXIDE REMOVAL FROM STACK GASES Supplement A by EARL D. OLIVER August 1973 A private report by the PROCESS ECONOMICS PROGRAM STANFORD RESEARCH INSTITUTE MENLO PARK, CALIFORNIA CONTENTS
ZHEJIANG FOTECH INTERNATIONAL CO., LTD.
Company Profile Zhejiang Fotech International Co., Ltd is a leading manufacturer and supplier of Refrigerant Gases, Fluor Polymer and Fluor Rubber. Products that are inventoried include:r22, R32, R134A,
Material Safety Data Sheet
Material Safety Data Sheet Kit for the Preparation of Technetium Tc 99m Sulfur Colloid Injection Diagnostic for Intravenous and Oral Use ISSUE DATE: 20-Jun-08 ORIGINATOR: P.E. Buck REVIEWER: Lars Waldmann
Chemical Oxidation and Reduction
Chemical Oxidation and Reduction Benno Rahardyan FTSL-ITB Taken from : PIERO M. ARMENANTE NJIT What is oxidation? Simply put: The adding of an oxygen atom You are changing the composition of a molecule
REGENERATION OF ALKANOLAMINES USED IN NATURAL GAS PURIFICATION
Journal of Chemical Ruslan Technology Khayitov, and Gulnara Metallurgy, Narmetova 51, 3, 2016, 281-286 REGENERATION OF ALKANOLAMINES USED IN NATURAL GAS PURIFICATION Ruslan Khayitov, Gulnara Narmetova
Balancing chemical reaction equations (stoichiometry)
Balancing chemical reaction equations (stoichiometry) This worksheet and all related files are licensed under the Creative Commons Attribution License, version 1.0. To view a copy of this license, visit
Removal of suspended and dissolved organic solids
Removal of suspended and dissolved organic solids Types of dissolved solids The dissolved solids are of both organic and inorganic types. A number of methods have been investigated for the removal of inorganic
Wagerup Refinery: Odour Strength vs Concentration of VOC, Aldehydes & Ketones from Various Operating Units
Notes on the Relationship Between Measured Odour Units and Concentration of VOCs, Aldehydes and Ketones of Gases Emitted from Various Units at Wagerup Refinery - Updated as of 04 February 2005 During 2001,
The Practicality (Necessity) of Use of Clean-up Techniques for the Analysis of D/F and PCB Congeners
The Practicality (Necessity) of Use of Clean-up Techniques for the Analysis of D/F and PCB Congeners Charles Neslund, Scientific Officer, Eurofins Lancaster Laboratories Environmental, LLC National Environmental
Test Report in accordance CDPH-IAQ
Hilti Entwicklungsgesellschaft GmbH Hiltistraße 6 86916 Kaufering Germany Test Report in accordance CDPH-IAQ Eurofins Product Testing A/S Smedeskovvej 38 8464 Galten Denmark voc@eurofins.com www.eurofins.com/voc-testing
A Green Oxidant for In-Situ Chemical Oxidation. Jack Peabody Regenesis
A Green xidant for In-Situ Chemical xidation Jack Peabody Regenesis jpeabody@regenesis.com The New Era of Environmentalism Green Sustainable Renewable Energy Chemistry Vehicles Farming Technologies Lifestyles
Figure 1. Pore size distribution
Product Information '2:(;Ã237,325(Ã/ÃDQGÃ9 Polymeric Adsorbents Dow has developed a new polymeric adsorbent type for the concentration of organics from air and water. Key features of these adsorbents are:
UV Hound Series. Dependable High Quality Air Monitoring. Accurate Readings Within Seconds. Portable UVDOAS Multi-gas Analyzers. Multi-Gas Capability
UV Hound Series Portable UVDOAS Multi-gas Analyzers Multi-Gas Capability Dependable High Quality Air Monitoring Individual VOCs PPB Sensitivity Non-Contact Optical Measurement Automated Reporting Configurable
Physicochemical Processes
Lecture 3 Physicochemical Processes Physicochemical Processes Air stripping Carbon adsorption Steam stripping Chemical oxidation Supercritical fluids Membrane processes 1 1. Air Stripping A mass transfer
Some data and solubility information for Sodium Chlorate
Some data and solubility information for Sodium Chlorate Technical Data And Physical Properties General: The chemical formula of sodium chlorate is NaClO 3 CAS No.7775-09-9. Molecular weight is 106.44.
Class III Wastewater Laboratory Analyst Examination Study Guide 2008
Class III Wastewater Laboratory Analyst Examination Study Guide 2008 Specific laboratory analyses included on Class III Exam: All Information and tests from Class I and Class II Plus the following - Biological
INDBOND 3000 Dry Strength Resin for Paper
INDBOND 3000 Dry Strength Resin for Paper INDBOND 3000 Dry Strength Resins are specially formulated polymers designed for better paper making and to improve strength characteristics like burst factor,
Unit 1: Chemistry in Action
Unit 1: Chemistry in Action Intermediate 1 Chemistry Learning Outcomes Substances Elements Everything in the world is made from about 100 elements. Each element has a name and a symbol. Chemists have arranged
Vapor Intrusion Sampling Options: Performance Data for Canisters, Badges, and Sorbent Tubes for VOCs
Vapor Intrusion Sampling Options: Performance Data for s, Badges, and Sorbent Tubes for VOCs Linda S. Coyne SKC Inc., 863 Valley View Road, Eighty Four, PA 1533 George Havalias, Maria C. Echarte American
MSE Seminar Laboratory Safety Skills
MSE Seminar Laboratory Safety Skills MSEGSA Safety Committee Cem Akatay John Koppes Kate Hess Pylin Sarobol Topics Personal Protective Equipment Proper glove selection and use When to use goggles and aprons
Bindzil and Levasil product guide. Colloidal silica dispersions functions and applications
Bindzil and Levasil product guide Colloidal silica dispersions functions and applications Applications for Bindzil and Levasil We market and sell waterborne colloidal silica dispersions designed and developed
Storage, Handling & Safe Use of Chemicals and Hazardous Materials
Training Title Storage, Handling & Safe Use of Chemicals and Hazardous Materials Training Duration 5 days Training Venue and Dates Storage, Handling and Safe Use of Chemical Handling and Hazardous Materials
Module: 7. Lecture: 36
Module: 7 Lecture: 36 DIMETHYL FORMAMIDE INTRODUCTION Dimethylformamide is an organic compound and denotes as DMF. The name is derived from the fact that it is a derivative of formamide, the amide of formic
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Sigma Aldrich RTC, Inc. 2931 Soldier Springs
Safety Services. Guidance on the Selection and Use of Disinfectants
Safety Services Guidance on the Selection and Use of Disinfectants Guidance on the Selection and Use of Disinfectants Chemical disinfectants reduce the number of viable micro-organisms to a level below
Lesson Plan. 24. Describe the influence of intermolecular forces on the physical and chemical properties of covalent compounds (PS-H-C5).
Lesson Plan GLE Physical Science 22. Predict the kind of bond that will form between two elements based on electronic structure and electronegativity of the elements (e.g., ionic, polar, nonpolar) (PS-H-C5).