Atomic Structure. Same atomic number Different mass number

Size: px

Start display at page:

Download "Atomic Structure. Same atomic number Different mass number"

Claire Barker
5 years ago
Views:

1 Mass number Number of protons and neutrons Atomic number Number of protons Atomic Structure Cl Atoms of the same element can have different numbers of neutrons - these atoms are called isotopes of that element. Proton Neutron Electron Relative mass 1 1 negligible Charge location nucleus nucleus shells The relative atomic mass of an element (Ar) compares the mass of atoms of the element, has the same value as the mass number. The relative formula mass (Mr) of a compound is the sum of the relative atomic masses of the atoms in the numbers shown in the formula. The relative formula mass of a substance, in grams, is known as one mole of that substance Same atomic number Different mass number

2 10 Questions Using the following information about Cl and Mg answer the question below 1. What is the mass number of this chlorine atom? 2. What is the atomic number of this chlorine atom? 3. How many protons neutrons and electrons does this chlorine atom have? 4. What is the electron configuration of a chlorine atom? 5. What is the relative mass of an electron? 6. What is the charge on a neutron particle? 7. Where in the atomic structure are electrons located? 8. What is the relative atomic mass of chlorine? 9. Using 35 Cl and 37 Cl as examples explain what is meant by an isotope. 10. What is the relative formula mass (Mr) of MgCl 2? Atomic Structure 35 Cl 17 Mg 24 12

Ionic bonding Metal and non-metal electron transfer Metals lose electrons and become positive ions. Non-metals gain electrons and become negative ions.

ions with -1 charge sodium chloride magnesium oxide calcium chloride Writing formulae The charges on the positive and negative ions need to balance out Na + Cl -

electrostatic forces in all directions between oppositely charged ions.

3 Ionic bonding Metal and non-metal electron transfer Metals lose electrons and become positive ions. Non-metals gain electrons and become negative ions. Metals in group 1 form ions with a +1 charge Metals in group 2 form ions with a +2 charge Non-metals in group 6 form ions with -2 charge Non-metals in group 7 form ions with -1 charge sodium chloride magnesium oxide calcium chloride Writing formulae The charges on the positive and negative ions need to balance out Na + Cl - NaCl Mg 2+ O 2- MgO Ca 2+ Cl - Cl - CaCl 2 Properties of ionic compounds Ionic compounds have regular structures (giant ionic lattices) in which there are strong electrostatic forces in all directions between oppositely charged ions. These compounds have high melting points and high boiling points because of the large amounts of energy needed to break the many strong bonds. When melted or dissolved in water, ionic compounds conduct electricity because the ions are free to move and carry the current

4 10 Questions 1. Do ionic bonds transfer or share electrons? 2. Ionic bonds exist between.. (a) Metals and Non-metals, (b) Non metals and Non-metals (c) Metals and Metals 3. Elements in group 7 form ions with what charge? 4. Elements in group 3 form ions with what charge? 5. Ionic compounds are held together by strong forces in all directions between oppositely charged ions. 6. Under what 2 conditions will ionic compounds conduct electricity? 7. Draw a diagram to show the electron arrangement in a fluorine ion. 8. Draw a diagram to show the electron arrangement in a magnesium ion. 9. What is the electron configuration of a fluorine ion? 10. What is the formula of calcium fluoride? Ionic bonding E _ C

5 Covalent bonding - molecules Hydrogen - H 2 (g) Chlorine - Cl 2 (g) Hydrogen chloride HCl (g) Oxygen - O 2 (g) Methane CH 4 (g) Properties of covalent compounds A covalent bond is a shared pair of electrons Substances that consist of simple molecules are gases, liquids or solids that have relatively low melting points and boiling points They do not conduct electricity because the molecules do not have an overall electric charge. No free electrons or ions. Water H 2 O (l) Ammonia NH 3 (g)

6 10 Questions 1. Do covalent bonds transfer or share electrons? 2. covalent bonds exist between.. (a) Metals and Non-metals, (b) Non metals and Non-metals (c) Metals and Metals 3. Elements in group 7 form covalent compounds with how many bonds? 4. Elements in group form covalent compounds with 3 bonds? 5. Why do covalent compounds NOT conduct electricity? 6. Are covalent bonds strong or weak? 7. Draw a diagram to show the electron arrangement in a carbon atom. 8. Draw a dot-cross diagram to show the bonding between 2 fluorine atoms 9. Draw a dot-cross diagram to show the bonding present in CH 4? 10. How many bonds does carbon form in CO 2? Covalent bonding - molecules

Covalent bonding - Giant Diamond (carbon only) All the atoms in these structures are linked to other atoms by strong covalent bonds and so they have very high melting points.

The layers are free to slide over each other because there are no covalent bonds between the layers and so graphite is soft and slippery.

7 Covalent bonding - Giant Diamond (carbon only) All the atoms in these structures are linked to other atoms by strong covalent bonds and so they have very high melting points. Graphite (carbon only) In graphite, each carbon atom bonds to three others, forming layers. The layers are free to slide over each other because there are no covalent bonds between the layers and so graphite is soft and slippery. In diamond, each carbon atom forms four covalent bonds with other carbon atoms in a giant covalent structure, so diamond is very hard. Silicon dioxide (Si + O) Sand In graphite, one electron from each carbon atom is delocalised. These delocalised electrons allow graphite to conduct heat and electricity. Giant covalent structures are also called macromolecules.

8 10 Questions 1. How many bonds do carbon atoms form in diamond? 2. How many bonds do carbon atoms form in graphite? 3. Why is graphite soft and slippery? 4. Why can graphite conduct electricity? 5. What can diamond not conduct electricity? 6. What is the chemical name for sand? 7. Giant covalent structures are also called? 8. Do giant covalent structures have high or low melting points? 9. Explain your answer to question Give a use for carbon nanotubes. Covalent bonding - Giant

Alloys Alloys are usually made from two or more different metals.

9 Metallic bonding Shape memory Alloys can return to their original shape after being deformed, eg Nitinol used in dental braces. Different sized atoms do not form a regular pattern. Metals Metals consist of giant structures of atoms arranged in a regular pattern. Alloys Alloys are usually made from two or more different metals. The different sized atoms of the metals distort the layers in the structure, making it more difficult for them to slide over each other and so make alloys harder than pure metals. Conduction depends on the ability of electrons to move throughout the metal. force heat

10 10 Questions 1. What type of bonding do metals have? 2. Draw a diagram to show the arrangement of atoms in a metal. 3. Do metals have a regular or irregular structure? 4. What is the main purpose of alloying metals? 5. Draw a diagram to show the arrangement of atoms in an alloy. 6. Do alloys have a regular or irregular structure? 7. Are metals good conductors or insulators (of electricity)? 8. How many elements are in an alloy? a) Only 2. b) At least 2, sometimes more. c) At least 5, all mixed together. 9. What are alloys called that can return to their original shape? 10. How can we return them to their original shape? Metallic bonding

Polymers and Nanoscience High density polymer chains close together Low density polymer - chains far apart Some do not melt when heated, these are called thermosetting polymers.

The melting point of a thermosoftening polymer is determined by the strength of the INTERMOLECULAR FORCES Nanoscience is the science of very small particles and looks at the properties of

11 Polymers and Nanoscience High density polymer chains close together Low density polymer - chains far apart Some do not melt when heated, these are called thermosetting polymers. These cross-links make the material tougher and less flexible. Some will soften easily, and can be moulded into shape before they are cooled down, these are called thermosoftening polymers. The melting point of a thermosoftening polymer is determined by the strength of the INTERMOLECULAR FORCES Nanoscience is the science of very small particles and looks at the properties of nanoparticles. These are particles with in the range of 0 1nm to 100nm. The name 'nano' means A nanoparticle is about 100 atoms Advantages Large surface area makes them effective catalysts. Nanotubes can be used in small scale circuits as nanowires. Disadvantages So small they can enter the skin and therefore the bloodstream. Easily become airborne, breathing in can potentially damage the lungs. Nanoparticles are present in sun screens May be used to develop faster computers, lighter construction materials and new coatings

12 10 Questions 1. Are hydrocarbons tightly packed together in HD or LD polystyrene? 2. Some plastics melt when heated, what do we call them? 3. Some plastics do not melt when heated, what do we call them? 4. Why do they not melt? 5. What is the melting point of a thermosoftening plastic determined by? 6. When we grind solids up into small particles, what happens to the surface area of the solid? 7. What is nanoscience? 8. Approximately how many atoms are in a nanoparticle? 9. State one advantage and one disadvantage of nanoparticles? 10. State one use for nanoparticles. Polymers and Nanoscience

Relative abundance Analytical techniques Elements and compounds can be detected and identified using instrumental methods. GC, GC-MS Advantages Highly accurate and sensitive. They are quicker.

13 Relative abundance Analytical techniques Elements and compounds can be detected and identified using instrumental methods. GC, GC-MS Advantages Highly accurate and sensitive. They are quicker. Enable very small samples to be analysed Chemical analysis can be used to identify additives in foods. Artificial colours can be detected/identified by paper chromatography Disadvantages Equipment is very expensive. Takes specialist training to use. results can ONLY be analysed by comparison with known data A B C D Components in a mixture can be identified by the distance they move relative to the solvent. This is the R f value: Distance moved by component Distance moved by solvent Retention time Different substances, carried by a gas, travel through a column packed with a solid material at different speeds, so that they become separated the number of peaks on the output of a gas chromatograph shows the number of compounds present. The position of the peaks on the output indicates the retention time. The output from the gas chromatography column can be linked to a mass spectrometer, which can be used to identify the substances leaving the end of the column by relative molecular mass

14 1. How can you separate a) A solid from a liquid b) A liquid from a gas c) A liquid from a liquid 10 Questions 2. What is an E-number? 3. State one advantage and one disadvantage of chromatography. 4. What do we call the filter paper after the chromatography experiment has ended? 5. What colours are present in blank inks? 6. What does the R f value represent? 7. What do the initials GC-MS stand for? 8. Give an example of a typical carrier gas in a GC-MS. 9. What is the period of time a gas remains in the column of a GC-MS called? 10. Give a use for chromatography. Analytical techniques

15 Calculations and moles The relative atomic mass of an element (Ar) compares the mass of atoms of the element, has the same value as the mass number. The relative formula mass (Mr) of a compound is the sum of the relative atomic masses of the atoms in the numbers shown in the formula. Relative formula mass 1. Write the formula of the compound. 2. Write the numbers of each atom in the formula. 3. Insert the relative atomic mass for each type of atom. 4. Calculate the total mass for each element. 5. Add up the total mass for the compound. 1. C 2 H 5 OH 2. (6xH) + (2xC) + (1xO) 3. (6x1) + (2x12) + (1x16) M r = 46 The relative formula mass of a substance, in grams, is known as one mole of that substance. Percentage of element in a compound There are 4 steps to calculate the percentage mass of an element in a compound Step 1: Step 2: Step 3: Step 4: Yield Write down the formula of the compound. Using the A r values on the data sheet calculate the M r of the compound. Write down the fraction of the element you are investigating as a fraction of the M r. Find percentage by multiplying fraction by 100. The amount of a product obtained is known as the yield. When compared with the maximum theoretical amount as a percentage, it is called the percentage yield.

16 10 Questions 1. What is a mole (don t say a small burrowing mammal)? 2. How do we calculate the Mr of a compound? 3. What is the Ar of Cl? 4. What is the Mr of Na 2 O? 5. What is the percentage of Na in Na 2 O? 6. What is the Mr of (NH 4 ) 2 SO 4? 7. What is the percentage of N in (NH 4 ) 2 SO 4? 8. What is the percentage of O in (NH 4 ) 2 SO 4? 9. What is the percentage of H in (NH 4 ) 2 SO What is the yield of a substance? Calculations and moles

17 Reaction kinetics For a reaction to occur: Step 1: Energy must be SUPPLIED to break bonds. Step 2: Energy is RELEASED when new bonds are made. A reaction is EXOTHERMIC if more energy is RELEASED then SUPPLIED (hotter). If more energy is SUPPLIED then is RELEASED then the reaction is ENDOTHERMIC (older). Even though no atoms are gained or lost in a chemical reaction, it is not always possible to obtain the calculated amount of a product because: the reaction may not go to completion because it is reversible. some of the product may be lost when it is separated from the reaction mixture some of the reactants may react in ways different from the expected reaction. In some chemical reactions, the products of the reaction can react to produce the original reactants. Such reactions are called reversible reactions and are represented: A + B C + ammonium chloride NH 4 Cl (s) CuSO 4.5H 2 O (s) ammonia D NH 3 (g) + HCl (g) If a reversible reaction is exothermic in one direction, it is endothermic in the opposite direction. The same amount of energy is transferred in each case. + hydrogen chloride The change from blue hydrated copper sulphate to white anhydrous copper sulphate is one of the most commonly known reversible reactions. hydrated copper sulphate anhydrous + steam copper sulphate CuSO 4 (s) + 5H 2 O (l)

18 10 Questions 1. For a reaction to occur why is energy supplied? 2. Why is energy released during a reaction? 3. If more energy is supplied than released is the reaction exothermic or endothermic? 4. If a reaction is endothermic will the surroundings get warmer or colder? 5. A reaction requires a lot of heat to take place, it is endothermic or exothermic? 6. Is breaking bonds an endothermic or exothermic process? 7. Give 2 reasons why a yield is not always 100%? 8. What is the symbol for a reversible reaction? 9. Give an example of a reversible reaction. 10. If a reversible reaction is exothermic in 1 direction what must it be in the other? Reaction kinetics

19 Reaction rates Amount of product formed Slower rate of reaction here due to reactants being used up Reactions occur when particles collide with sufficient energy. The minimum amount of energy required for particles to react on collision is called the activation energy. Fast rate of reaction here Slower reaction Time Reaction can be followed by: Loss in mass if gas produced. Measuring volume of a gas produced every min. Appearance/disappearance of colour. Change in ph etc. Factors affecting reaction rate Concentration: Increasing concentration increases number of collisions and increases rate Temperature: Particles have more energy and move faster and collide more often. More particles have energy greater than the activation energy so more successful collisions Catalyst: Catalysts change the rate of chemical reactions but are not used up during the reaction. Different reactions need different catalysts. Catalysts are important in increasing the rates of chemical reactions used in industrial processes to reduce costs. Pressure: Increasing pressure increases the number of collisions as the particles are closer. Surface area: Increases the number of collisions as there is more surface exposed

20 10 Questions 1. What equipment can be used to measure the mass of a product? 2. In terms of reactants how do we know when a reaction is completed? 3. State 2 ways in which a reaction can be followed. 4. Define activation energy. 5. How do catalysts effect the activation energy? 6. How does this change the rate of a reaction? Describe how the following factors effect the rate of a reaction in terms of amount (frequency) of collisions and energy of collisions? 7. Increasing the temperature. 8. Decreasing the concentration. 9. Increasing the pressure of gaseous reactants. 10. Grinding up solid calcium carbonate into a powder. Reaction rates

21 Acids and Bases Acid Formula Salts hydrochloric HCl chlorides sulphuric H 2 SO 4 sulphates nitric HNO 3 nitrates Red Green Purple Increasingly acidic Increasingly basic Acids give H + in water Bases accept H + Alkalis are soluble bases and give OH - in water Bases include, metal oxides, metal hydroxides, metal carbonates Common Acids hydrochloric acid - HCl sulphuric acid - H 2 SO 4 Common Bases sodium hydroxide - NaOH potassium hydroxide - KOH nitric acid - HNO 3 ammonia NH 3 Reactions occur when particles collide with sufficient energy. The minimum amount of energy required for particles to react on collision is called the activation energy. acid acid + + metal base salt salt + + hydrogen water acid + carbonate salt + H 2 O + CO 2 Neutralisation An acid can be neutralised by a base H + (aq) + OH - (aq) H 2 O (l) Base Acid Salt Calcium hydroxide Magnesium oxide Calcium carbonate Hydrochloric acid Nitric acid Sulphuric acid Calcium chloride Magnesium nitrate Calcium sulphate

22 10 Questions 1. What scale is used to measure how acidic or alkaline a substance is? 2. What in the name and formula of the acid that can be used to make magnesium chloride from magnesium ribbon? 3. What is the definition of an acid? 4. What is the difference between an alkali and a base? 5. What gas is formed when an acid reacts with a metal? 6. How can we test for this gas? 7. What is the name of the salt formed when Na 2 O reacts with HNO 3? 8. What is the name of the salt formed when SnO 2 reacts with H 2 SO 4? 9. What is the formula of the salt formed when Al reacts with HCl? 10. What is the formula of the salt formed when Mg reacts with HNO 3? Acids and Bases

23 Salts Soluble salts Metal can be reacted with an acid until the metal is used up. Excess metal can be filtered off. Water can be evaporated from the solution and the salt left to crystallise Disadvantage: not all metals are suitable; some are too reactive and others are not reactive enough. acid acid + + metal base salt salt hydrogen acid + carbonate salt + H 2 O + CO 2 acid + alkali salt Ammonia dissolves in water to produce an alkaline solution. It is used to produce ammonium salts. Ammonium salts are important as fertilisers water water Place a known volume of alkali in a beaker Add an indicator Add acid dropwise until the solution is neutral. Record the amount of acid required. Mix the same volume of alkali and acid, evaporate off some of the water and leave to crystallise Insoluble salts Insoluble salts can be made by mixing appropriate solutions of ions so that a precipitate is formed. The precipitate can be separated using filter paper, washed with distilled water and left to dry. All nitrates are soluble, all sodium salts are soluble. Precipitation can be used to remove unwanted ions from solutions, for example in treating water for drinking or in treating effluent.

24 10 Questions Nickel sulphate (a soluble salt) can be made by adding an excess of insoluble nickel oxide to sulphuric acid until no further reaction occurs. 1. Give an observation that would show you that the reaction is complete? 2. What equipment could be used to removed the excess nickel oxide? 3. What is the name of this separation method? 4. How you could produce crystals of nickel sulphate from nickel sulphate solution? 5. What other reactant could be added to H 2 SO 4 to make nickel sulphate? 6. What is the formula of nickel (II) sulphate? Silver chloride is an insoluble salt which is formed as a precipitate when silver nitrate and sodium chloride solutions are mixed together. 7. Write a word equation for this reaction. 8. What is the formula of silver (I) chloride? 9. After mixing the reactants how could the insoluble salt be separated? 10. Lead nitrate and sodium sulphate are reacted together in solution. Name the two salts made in this reaction? Salts

Electrolysis Molten When ionic compounds are melted or dissolved in water the ions can move. Br 2 + - Positive ions (CATIONS) move to the negative electrode (CATHODE).

25 Electrolysis Molten When ionic compounds are melted or dissolved in water the ions can move. Br Positive ions (CATIONS) move to the negative electrode (CATHODE). This means that molten ionic compounds and solutions of ionic compounds conduct electricity. Anode Cathode Br - Br - Pb 2+ Negative ions (ANIONS) move to the positive electrode (ANODE). The solution or melt that is electrolysed is called the ELECTROLYTE. Electrolysis of molten compounds All ionic compounds contain positive and negative ions. We can predict the ions present from the formula and the charges on the ions using the formula and the data sheet. During electrolysis: The CATIONS move to the negative electrode where they GAIN electrons The ANIONS move to the positive electrode where they LOSE electrons OF ELECTRONS e.g. lead bromide PbBr 2 Pb Br - e.g. Copper chloride CuCl 2 Cu Cl - O xidation I s L oss R eduction I s G ain

26 10 Questions 1. Why can t ionic solids conduct electricity? 2. Why can ionic compounds conduct electricity when molten? 3. What is the name given to the positive electrode? 4. (electricity using compound splitting a up) rearrange sentence! 5. What is a compound split up into using electrolysis? 6. What is the solution or melt that is electrolysed called? 7. What does the acronym O I L R I G stand for? 8. Br - ions reach the positive electrode and loose electrons to form bromine gas, is this process oxidation or reduction? 9. What ions are present in calcium iodide and which electrode would each ion go to? 10. What is the formula of the calcium iodide? Electrolysis Molten

Electrolysis - Solutions At the negative electrode, positively charged ions gain electrons (reduction) and at the positive electrode, negatively charged ions lose electrons (oxidation).

Brine Compounds: sodium chloride (NaCl) and water (H 2 O) Ions: Na + + Cl - (Anode) --- OH - + H + (Cathode) When the chloride ions and hydrogen ions have been discharged NaOH is left behind

27 Electrolysis - Solutions At the negative electrode, positively charged ions gain electrons (reduction) and at the positive electrode, negatively charged ions lose electrons (oxidation). If there is a mixture of ions, the products formed depend on the reactivity of the elements involved. Brine Compounds: sodium chloride (NaCl) and water (H 2 O) Ions: Na + + Cl - (Anode) --- OH - + H + (Cathode) When the chloride ions and hydrogen ions have been discharged NaOH is left behind Electroplating Electrolysis is used to electroplate objects. This may be for a variety of reasons and includes copper plating and silver plating. Passing a current through a solution containing Cu2+ ions or Ag+ ions will result in the silver or copper being deposited on the cathode. Extraction of aluminium Bauxite aluminium ore containing aluminium oxide Aluminium oxide has a very high melting point The electrolysis takes place when the aluminium oxide is molten. It is dissolved in molten cryolite to reduce the temperature at which it melts. This reduces energy costs The cathode and anode are made of graphite Products in the electrolysis of brine: Chlorine (Cl 2 ) - used in bleach and plastics. Hydrogen (H 2 ) - used in the hydrogenation of vegetable oil to make butter. Sodium hydroxide (NaOH) - used in soap. Oxygen is released at the anode where it reacts with the graphite to form carbon dioxide. Therefore the anode needs to be replaced often

28 Electrolysis - Solutions 1. What is the chemical formula of salt in the sea? 2. What ions are present in brine? 3. What are the 3 products made when brine undergoes electrolysis? Give a use of each one. 4. What ions move towards the anode? 5. What ions move towards the cathode? 6. What gas discharged at the anode? 7. What gas discharged at the cathode? 8. What ions are left in solution? 9. What is the name of the compound left in the solution 10. When bauxite undergoes electrolysis what metal is formed and why does the carbon anode need to be frequently replaced? Electrolysis Molten

Atomic Structure. Same atomic number Different mass number

Atomic Structure. Same atomic number Different mass number Mass number Number of protons and neutrons Atomic number Number of protons Atomic Structure Cl 35 17 Atoms of the same element can have different numbers of neutrons - these atoms are called isotopes of