PARTICLE SIZE EFFECT FROM MICRO TO NANO ON THE THERMAL AND MECHANICAL PROPERTIES OF POLYMER COMPOSITES
|
|
- Randolf McDowell
- 6 years ago
- Views:
Transcription
1 Indian Institute of Technology Delhi (IITD), New Delhi, 2013
2 PARTICLE SIZE EFFECT FROM MICRO TO NANO ON THE THERMAL AND MECHANICAL PROPERTIES OF POLYMER COMPOSITES by: M.HOSSEIN ALAEI Department of Applied Mechanics Submitted in fulfillment of requirements of the degree of Doctor of Philosophy to the INDIAN INSTITUTE OF TECHNOLOGY DELHI JULY 2013
3 Certificate This is to certify that the thesis entitled, Particle Size Effect from Micro to Nano on the Thermal and Mechanical Properties of Polymer Composites submitted by Mr. Mohammad Hossein Alaei to the Indian Institute of Technology Delhi, for the fulfillment of award of the degree, Doctor of Philosophy, is a record of bonafide research work carried out by him under our supervision and guidance. This thesis has been prepared in conformity with the rules and regulations of the Indian Institute of Technology Delhi, New Delhi. The thesis, in our opinion, is worthy of consideration for award of the degree of Doctor of Philosophy in accordance with the regulations of the Institute. To the best of our knowledge, the results embodied in the thesis have not been submitted to any other University or Institute for the award of any other Degree or Diploma. (Puneet Mahajan) Professor Department of Applied Mechanics Indian Institute of Technology Delhi Hauz Khas, New Delhi , India (Naresh Bhatnagar) Professor Department of Mechanical Engineering Indian Institute of Technology Delhi Hauz Khas, New Delhi , India i
4 Acknowledgments At first I thank The God, The Almighty, for blessings for whatever I have and giving me inner solace and strength to overcome the ups and downs of life. I am very much pleased to express my gratefulness and indebtedness to my esteemed supervisors, Professor Puneet Mahajan, Applied Mechanics Department and Professor Naresh Bhatnagar, Mechanical Engineering Department of IIT Delhi, for their outstanding support during the research work. It is needless to mention that both of them have been extremely helpful to me in providing quality guidance; valuable time and of course support on various facets of the research work and other situations of life. I am extremely grateful to Prof. D. Kondo and Prof. M. Brieu for extensive help they have rendered in completion of my theoretical work. I am also thankful to my parents, my two sisters Zeinab and Niloofar and my wife Samira, who encouraged me to peruse this degree at the cost of physical and mental separation. M.HOSSEIN ALAEI ii
5 Abstract The recent emergence of particulate composites such as nano composites has stimulated tremendous research in material sciences and solid mechanics. Specifically, the incorporation of nano sized objects in a traditional matrix material give rise to advanced composites with improved physical properties. This is due to the fact that atoms at the surface/interface of the inhomogeneities experience a different local environment than atoms in the interior of the material and the equilibrium position and energy of these atoms will, in general, be different from those of the atoms in the interior. For a medium in which the number of atoms near the surface/interface is small compared to the total number of atoms (i.e. conventional composites), such effect is insignificant, and may be rightfully ignored. However, for a fine-scaled material and nano-inhomogeneities with a large ratio of the surface/interface region to the bulk, the surface/interface effect can be substantial. The thesis unfolds the unique experimental study of uniform shape and size spheres of silica (SiO 2 ) having a size range from 130 µm down to 15 nm in a selected polymer matrix of polypropylene to study first, the effect of particle size as a unique variable on the thermo-mechanical properties of particulate composites and secondly to identify experimentally for the first time the surface elasticity parameters using the experimental results obtained through the mechanical testing of the manufactured composite samples using Digital Image Correlation (DIC) and by inverse use of recent micromechanical models. Unlike initial assumption of surface elasticity parameters being numerical constants, it is observed that these terms are variables and are functions of particle size. Further Finite Element Method (FEM) is used to model the size-effect in the form of interphase thickness between matrix and the particle to further improve the FEM modeling of polymer composite. Experimental results obtained through uniaxial testing of prepared composite samples are correlated with the FEM results in order to find out the equivalent interface thickness of the particles of different sizes. It is observed that interface thickness is a function of particle size, which slightly increases for samples having particle size above 100 nm and exponentially for particle sizes below 100 nm. iii
6 Table of Contents Certificate... i Acknowledgments... ii Abstract... iii Table of Contents... iv List of Figures... vii List of Tables... xi List of Abbreviations... xii Nomenclature... xiii CHAPTER Introduction Composite Materials History Composite Advantages Classification of Composite Materials Composite Classification Based on Matrix Material Composite Classification Based on Reinforcement Form Heterogeneity, Homogeneity and Representative Volume Element (RVE) Modeling of Composite Materials Computational Material Modeling Molecular Scale Methods Microscale Methods Mesoscale and Macroscale Methods Micromechanics and Homogenization Eshelby Mori- Tanaka Self- Consistent Differential Scheme Evaluation of Existing Micro Mechanical Models for Different Cases Dilute Concentration (c 1~0) High- Concentration Asymptotes (c 1~1) Rigid Particles Voids Motivation Chapter Contents What questions will be answered by this work? CHPTER Literature Review Effect of Particle Size on Thermo- Mechanical Properties of Particulate Composites iv
7 2.1.1 Effect of Particles on Mechanical Properties of Polymer Matrix Effect of Particle Size on Thermal Properties of Polymer Matrix Theories for Elastic Modulus Existing Gaps and Motivation Objectives CHAPTER Sample Preparation Selection of Material System Reinforcement Particles Polymer Matrix Composite Compositions Dry Blending Melt Compounding Injection Molding Morphological Characterization Transmission Electron Microscopy (TEM) Scanning Electron Microscopy (SEM) Field Emission Scanning Electron Microscopy (FESEM) Results and Discussion CHAPTER Thermal Characterization DSC TGA Wide angle X- Ray scattering (WAXS) Results and Discussion Effect of Particle Size on Melting Behaviour of Composite Effect of Filler Size on Crystallization Behaviour Thermal Stability Crystallinity Conclusions CHAPTER Mechanical Characterization Testing for Mechanical Properties Results and Discussion Elastic Properties Ultimate Strength Toughness Conclusions CHAPTER Experimental Identification of Surface Elasticity Parameters v
8 6.1 Introduction Duan s Model for Prediction of Bulk and Shear Modulus of Heterogeneous Materials Brisard s Model for Prediction of Bulk and Shear Modulus of Heterogeneous Materials Validation of the Observed Results with another Material System Conclusions CHAPTER Numerical Modeling of the Interface to Study the Size Effect Finite Element (FE) Modeling Boundary Conditions and Meshing Interface Property Determination of the Young s Modulus Results Conclusions CHAPTER Results, Discussion and Scope for Future Work Results Conclusions Scope for Future Work Contribution References Bio- data vi
AN ELECTRO-THERMAL APPROACH TO ACTIVE THERMOGRAPHY RAJESH GUPTA
AN ELECTRO-THERMAL APPROACH TO ACTIVE THERMOGRAPHY by RAJESH GUPTA Centre for Applied Research in Electronics Submitted in fulfillment of the requirements of the degree of DOCTOR OF PHILOSOPHY to the INDIAN
More informationFATIGUE BEHAVIOUR OF OFFSHORE STEEL JACKET PLATFORMS
FATIGUE BEHAVIOUR OF OFFSHORE STEEL JACKET PLATFORMS by ASHOK GUPTA THESIS SUBMITTED TO THE INDIAN INSTITUTE OF TECHNOLOGY, DELHI FOR THE AWARD OF THE DEGREE OF DOCTOR OF PHILOSOPHY Department of Civil
More informationMESOSCALE DATA ASSIMILATION FOR SIMULATION OF HEAVY RAINFALL EVENTS ASSOCIATED WITH SOUTH-WEST MONSOON
MESOSCALE DATA ASSIMILATION FOR SIMULATION OF HEAVY RAINFALL EVENTS ASSOCIATED WITH SOUTH-WEST MONSOON ASHISH ROUTRAY CENTRE FOR ATMOSPHERIC SCIENCES INDIAN INSTITUTE OF TECHNOLOGY, DELHI HAUZ KHAS, NEW
More informationDUST EXPLOSION MODELING USING MECHANISTIC AND PHENOMENOLOGICAL APPROACHES
DUST EXPLOSION MODELING USING MECHANISTIC AND PHENOMENOLOGICAL APPROACHES VIMLESH KUMAR BIND DEPARTMENT OF CHEMICAL ENGINEERING Submitted in fulfillment of the requirements of the degree of DOCTOR OF PHILOSOPHY
More informationVIBRATORY STRESS ANALYSIS AND FATIGUE LIFE ESTIMATION OF TURBINE BLADE
VIBRATORY STRESS ANALYSIS AND FATIGUE LIFE ESTIMATION OF TURBINE BLADE By NALINAKSH S. VYAS A Thesis Submitted in fulfilment of the requirments of the degree of DOCTOR OF PHILOSOPHY. Z a xi UTE OR r o
More informationDIFFRACTIVE OPTICAL ELEMENTS IN SPECKLE METROLOGY AND TEMPERATURE MEASUREMENT
DIFFRACTIVE OPTICAL ELEMENTS IN SPECKLE METROLOGY AND TEMPERATURE MEASUREMENT By A. J. PRAMILA DANIEL Instrument Design Development Centre THESIS SUBMITTED IN FULFILMENT OF THE REQUIREMENTS OF THE DEGREE
More informationSTUDIES ON PHOTONIC BANDGAP BRAGG FIBERS AND WAVEGUIDES
STUDIES ON PHOTONIC BANDGAP BRAGG FIBERS AND WAVEGUIDES by SONALI DASGUPTA Department of Physics Submitted in fulfillment of the requirements of the degree of Doctor of Philosophy to the INDIAN INSTITUTE
More informationINDIAN INSTITUTE OF TECHNOLOGY, DELHI
MATHEMATICAL MODELLING AND ANALYSIS OF RAILWAY PNEUMATIC BRAKE SYSTEM A Thesis submitted in fulfilment of the requirements of the degree of DOCTOR OF PHILOSOPHY by S. BHARATH DEPARTMENT OF MECHANICAL ENGINEERING
More informationMATHEMATICAL MODELLING OF DISPERSION OF AIR POLLUTANTS IN LOW WIND CONDITIONS
MATHEMATICAL MODELLING OF DISPERSION OF AIR POLLUTANTS IN LOW WIND CONDITIONS by ANIL KUMAR YADAV Thesis submitted to the Indian Institute of Technology, Delhi for the award of the degree of DOCTOR OF
More information-fo 一喝INVESTIGATIONS OF THE FLOW OF MULTISIZED HETEROGENEOUS SLURRIES IN STRAIGHT PIPE AND PIPE BENDS
-fo 一喝INVESTIGATIONS OF THE FLOW OF MULTISIZED HETEROGENEOUS SLURRIES IN STRAIGHT PIPE AND PIPE BENDS by MUKHTAR AHMAD Department of Applied Mechanics Thesis submitted n fu/fi 加 ent of the requirements
More informationto the INDIAN INSTITUTE OF TECHNOLOGY, DELHI
by SANDEEP KUMAR Department of Applied Mechanics Submitted in fulfilment of the tequirement for the degree of DOCTOR OF PHILOSOPHY to the INDIAN INSTITUTE OF TECHNOLOGY, DELHI MARCH 1997 jneyah sa nit
More informationButje Alfonsius Louk Fanggi
AXIAL COMPRESSIVE BEHAVIOR OF FRP-CONCRETE-STEEL DOUBLE-SKIN TUBULAR COLUMNS Butje Alfonsius Louk Fanggi BEng and MEng (Structural Engineering) Thesis submitted to The University of Adelaide School of
More informationA THESIS. Submitted by MAHALINGA V. MANDI. for the award of the degree of DOCTOR OF PHILOSOPHY
LINEAR COMPLEXITY AND CROSS CORRELATION PROPERTIES OF RANDOM BINARY SEQUENCES DERIVED FROM DISCRETE CHAOTIC SEQUENCES AND THEIR APPLICATION IN MULTIPLE ACCESS COMMUNICATION A THESIS Submitted by MAHALINGA
More informationCHAPTER 4 MODELING OF MECHANICAL PROPERTIES OF POLYMER COMPOSITES
CHAPTER 4 MODELING OF MECHANICAL PROPERTIES OF POLYMER COMPOSITES 4. Introduction Fillers added to polymer matrices as additives are generally intended for decreasing the cost (by increase in bulk) of
More informationECM PROCESS CHARACTERISTICS
ECM PROCESS CHARACTERISTICS A PROJECT SUBMITTED IN PARTIAL FULFILLMENT OF THE REQUIREMENT FOR THE DEGREE OF Bachelor of Technology In Mechanical Engineering Submitted by: ANIL KUMAR MEHER ROLL NO. : 10503046
More informationStudies on Myelin Formation & Particulate growth in Mixed Surfactant System
Studies on Myelin Formation & Particulate growth in Mixed Surfactant System Project Report Submitted in partial fulfillment For the degree of MASTER OF SCIENCE IN CHEMISTRY Under The Academic Autonomy
More informationFREE VIBRATIONS OF FRAMED STRUCTURES WITH INCLINED MEMBERS
FREE VIBRATIONS OF FRAMED STRUCTURES WITH INCLINED MEMBERS A Thesis submitted in partial fulfillment of the requirements for the degree of Bachelor of Technology in Civil Engineering By JYOTI PRAKASH SAMAL
More informationAM11: Diagnostics for Measuring and Modelling Dispersion in Nanoparticulate Reinforced Polymers. Polymers: Multiscale Properties.
AM11: Diagnostics for Measuring and Modelling Dispersion in Nanoparticulate Reinforced Polymers Polymers: Multiscale Properties 8 November 2007 Aims Provide diagnostic tools for quantitative measurement
More informationCERTAIN ASPECTS OF THE NUMERICAL SIMULATION OF CIRCULATION IN THE BAY OF BENGAL AND THE ARABIAN SEA
CERTAIN ASPECTS OF THE NUMERICAL SIMULATION OF CIRCULATION IN THE BAY OF BENGAL AND THE ARABIAN SEA by INDU JAIN A THESIS SUBMITTED IN FULFILMENT OF THE REQUIREMENTS FOR THE DEGREE OF DOCTOR OF PHILOSOPHY
More informationContinuum Modeling Techniques to Determine Mechanical Properties of Nanocomposites
International OPEN ACCESS Journal Of Modern Engineering Research (IJMER) Continuum Modeling Techniques to Determine Mechanical Properties of Nanocomposites Sonali Gholap 1, Dr. Dhananjay R. Panchagade
More informationImpact of disorder and topology in two dimensional systems at low carrier densities
Impact of disorder and topology in two dimensional systems at low carrier densities A Thesis Submitted For the Degree of Doctor of Philosophy in the Faculty of Science by Mohammed Ali Aamir Department
More informationDepartment of Materials Science &Engineering
INDIAN INSTITUTE OF TECHNOLOGY DELHI Department of Materials Science &Engineering M.TECH. PROGRAM IN POLYMER SCIENCE AND TECHNOLOGY Information Brochure 2018-19 About us The recently started Department
More informationModule 7: Micromechanics Lecture 34: Self Consistent, Mori -Tanaka and Halpin -Tsai Models. Introduction. The Lecture Contains. Self Consistent Method
Introduction In this lecture we will introduce some more micromechanical methods to predict the effective properties of the composite. Here we will introduce expressions for the effective properties without
More informationMir Md. Maruf Morshed
Investigation of External Acoustic Loadings on a Launch Vehicle Fairing During Lift-off Supervisors: Professor Colin H. Hansen Associate Professor Anthony C. Zander School of Mechanical Engineering South
More informationMICROMECHANICAL DEFORMATIONS IN PARTICULATE FILLED POLYMERS: THE EFFECT OF ADHESION
MICROMECHANICAL DEFORMATIONS IN PARTICULATE FILLED POLYMERS: THE EFFECT OF ADHESION K. Renner, J. Móczó, B. Pukánszky Laboratory of Plastics and Rubber Technology, Department of Physical Chemistry and
More informationEffect of 3D Stress States at Crack Front on Deformation, Fracture and Fatigue Phenomena
Effect of 3D Stress States at Crack Front on Deformation, Fracture and Fatigue Phenomena By Zhuang He B. Eng., M. Eng. A thesis submitted for the degree of Doctor of Philosophy at the School of Mechanical
More informationAn Introduction to Polymer Physics
An Introduction to Polymer Physics David I. Bower Formerly at the University of Leeds (CAMBRIDGE UNIVERSITY PRESS Preface Acknowledgements xii xv 1 Introduction 1 1.1 Polymers and the scope of the book
More informationDepartment of Mechanical Engineering, Imperial College London, London SW7 2AZ, UK
5 th Australasian Congress on Applied Mechanics, ACAM 2007 10-12 December 2007, Brisbane, Australia Toughening mechanisms in novel nano-silica epoxy polymers A.J. Kinloch 1, B.B. Johnsen 1, R.D. Mohammed
More informationContents. Foreword by Darrell H. Reneker
Table of Foreword by Darrell H. Reneker Preface page xi xiii 1 Introduction 1 1.1 How big is a nanometer? 1 1.2 What is nanotechnology? 1 1.3 Historical development of nanotechnology 2 1.4 Classification
More informationPolymer engineering syllabus (BSc)
Polymer engineering syllabus (BSc) First semester Math 1 Physics 1 Physics 1 lab General chemistry General chemistry lab workshop Second semester Math 2 Physics 2 Organic chemistry 1 Organic chemistry
More informationGEOTECHNICAL EVALUATION AND ANALYSIS OF DELHI METRO TUNNELS
GEOTECHNICAL EVALUATION AND ANALYSIS OF DELHI METRO TUNNELS By HOSH RAM YADAV Department of Civil Engineering submitted in fulfilment of the requirements for the degree of DOCTOR OF PHILOSOPHY to the INDIAN
More informationSTUDIES ON CARBON NANOFIBER REINFORCED POLYPROPYLENE COMPOSITES
STUDIES ON CARBON NANOFIBER REINFORCED POLYPROPYLENE COMPOSITES by SANGITA NANDI Centre for Polymer Science and Engineering Submitted in fulfillment of the requirements of the degree of Doctor of Philosophy
More informationIndustrial Rotating Kiln Simulation
Industrial Rotating Kiln Simulation This thesis is presented for the degree of Doctor of Philosophy Faculty of Science University of Technology, Sydney 1999 Submitted by Dennis Van Puyvelde, B. Chem. Eng.
More informationContents. Preface XIII
V Contents Preface XIII 1 General Introduction 1 1.1 Fundamental Knowledge Required for Successful Dispersion of Powders into Liquids 1 1.1.1 Wetting of Powder into Liquid 1 1.1.2 Breaking of Aggregates
More informationPredicting Elastic Properties of Unidirectional SU8/ZnO Nanocomposites using COMSOL Multiphysics
Predicting Elastic Properties of Unidirectional SU8/ZnO Nanocomposites using COMSOL Multiphysics Neelam Mishra 1, and Kaushik Das *1 1 School of Minerals Metallurgical and Materials Engineering, Indian
More informationMECHANICS OF CARBON NANOTUBE BASED COMPOSITES WITH MOLECULAR DYNAMICS AND MORI TANAKA METHODS. Vinu Unnithan and J. N. Reddy
MECHANICS OF CARBON NANOTUBE BASED COMPOSITES WITH MOLECULAR DYNAMICS AND MORI TANAKA METHODS Vinu Unnithan and J. N. Reddy US-South American Workshop: Mechanics and Advanced Materials Research and Education
More informationThe Dynamics of Potassium in some. Australian soils
The Dynamics of Potassium in some Australian soils Serhiy Marchuk In fulfilment of the degree of DOCTOR OF PHILOSOPHY Soil Science Group School of Agriculture, Food and Wine The University of Adelaide
More informationDEVELOPMENT OF ACID-BASE INDICATOR FROM FLOWER PETALS (HIBISCUS SABDARIFFA AND ALLAMANDA)
DEVELOPMENT OF ACID-BASE INDICATOR FROM FLOWER PETALS (HIBISCUS SABDARIFFA AND ALLAMANDA) By OLA YIWOLA JACOB (2006/24200EH) DEPARTMENT OF CHEMICAL ENGINEERING FEDERAL UNIVERSITY OF TECHNOLOGY, MINNA NIGERIA
More informationDEPARTMENT OF POLYMER AND PROCESS ENGINEERING (http://www.uet.edu.pk/polymer.htm)
DEPARTMENT OF POLYMER AND PROCESS ENGINEERING (http://www.uet.edu.pk/polymer.htm) Programs Offered The Department offers the following degree programmes a) M.Sc. Polymer and Process Engineering b) Ph.D.
More informationGlobal Phase Diagrams and Critical Phenomena of Binary Mixtures. Ji Lin Wang
Global Phase Diagrams and Critical Phenomena of Binary Mixtures Ji Lin Wang Dissertation Submitted in fulfilment of requirements for the degree of Doctor of Philosophy Centre for Molecular Simulation School
More informationPreface Chapter 1. Introduction to Heat Transfer During the Forming of Organic Matrix Composites
Preface... xv Chapter 1. Introduction to Heat Transfer During the Forming of Organic Matrix Composites... 1 Didier DELAUNAY 1.1. Introduction... 1 1.2. Examples of injection of short fiber reinforced composites...
More informationEVALUATION OF EFFECTIVE MECHANICAL PROPERTIES OF COMPLEX MULTIPHASE MATERIALS WITH FINITE ELEMENT METHOD
U.P.B. Sci. Bull., Series D, Vol. 79, Iss. 3, 2017 ISSN 1454-2358 EVALUATION OF EFFECTIVE MECHANICAL PROPERTIES OF COMPLEX MULTIPHASE MATERIALS WITH FINITE ELEMENT METHOD Mohamed said BOUTAANI 1, Salah
More informationSTUDIES IN CHARACTERISATION AND DYEING BEHAVIOUR OF SOME COMPONENTS OF INDIAN MADDER (Rubia cordifolia) ON NYLON AND POLYESTER
STUDIES IN CHARACTERISATION AND DYEING BEHAVIOUR OF SOME COMPONENTS OF INDIAN MADDER (Rubia cordifolia) ON NYLON AND POLYESTER by SHIPRA KUMARI DEPARTMENT OF TEXTILE TECHNOLOGY Submitted in fidfillment
More informationAIR QUALITY FORECASTING USING MATHEMATICAL MODELS FOR DELHI ANIKENDER KUMAR
AIR QUALITY FORECASTING USING MATHEMATICAL MODELS FOR DELHI by ANIKENDER KUMAR Centre for Atmospheric Sciences Submitted in fulfillment of the requirements of the degree of Doctor of Philosophy to the
More informationDOCTOR OF PHILOSOPHY IN CHEMISTRY
STUDIES ON NEW REAGENTS FOR THE SPECTROPHOTOMETRIC DETERMINATION OF ANIONS, METAL IONS AND DRUGS A THESIS SUBMITTED FOR THE DEGREE OF DOCTOR OF PHILOSOPHY IN CHEMISTRY TO THE FACULTY OF SCIENCE AND TECHNOLOGY
More informationin materials/structural modellings and designs Liping Liu
Closed-form solutions and their applications in materials/structural modellings and designs Liping Liu University it of Houston Why composites and heterogeneous structures? A material has many different
More informationTowards Affordable, Closed-Loop Recyclable Future Low Carbon Vehicles. Supervisors : Dr. L.T. Harper, Dr. M. Johnson, Prof. N.A.
Towards Affordable, Closed-Loop Recyclable Future Low Carbon Vehicles Supervisors : Dr. L.T. Harper, Dr. M. Johnson, Prof. N.A. Warrior Moulding issues with CF/PP Now looking to use CF/PA6 consolidation
More informationFRACTURE IN HIGH PERFORMANCE FIBRE REINFORCED CONCRETE PAVEMENT MATERIALS
FRACTURE IN HIGH PERFORMANCE FIBRE REINFORCED CONCRETE PAVEMENT MATERIALS ERIK DENNEMAN A thesis submitted in partial fulfilment of the requirements for the degree of PHILOSOPHIAE DOCTOR (ENGINEERING)
More informationEFFECT OF SOIL TYPE ON SEISMIC PERFROMANCE OF REINFORCED CONCRETE SCHOOL BUILDING
EFFECT OF SOIL TYPE ON SEISMIC PERFROMANCE OF REINFORCED CONCRETE SCHOOL BUILDING NUR AMIRAH BINTI MOHD NASAI B. ENG (HONS.) CIVIL ENGINEERING UNIVERSITI MALAYSIA PAHANG SUPERVISOR S DECLARATION I hereby
More informationA STUDY ON THE INTERACTION OF EXHAUST SMOKE WITH THE SUPERSTRUCTURE AND GAS TURBINE INTAKES OF NAVAL SHIPS. R.Vijayakumar. NO ~~rlt FO F TEGH
A STUDY ON THE INTERACTION OF EXHAUST SMOKE WITH THE SUPERSTRUCTURE AND GAS TURBINE INTAKES OF NAVAL SHIPS. by R.Vijayakumar NO ~~rlt FO F TEGH DEPARTMENT OF APPLIED MECHANICS INDIAN INSTITUTE OF TECHNOLOGY
More informationViscoelastic Damping Characteristics of Indium-Tin/SiC Particulate Composites
Viscoelastic Damping Characteristics of Indium-Tin/SiC Particulate Composites HyungJoo Kim, Colby C. Swan Ctr. for Computer-Aided Design, Univ. of Iowa Roderic Lakes Engineering Physics, Univ. of Wisconsin
More informationCannibalism in Barramundi Lates calcarifer: Understanding Functional Mechanisms and Implication to Aquaculture
Cannibalism in Barramundi Lates calcarifer: Understanding Functional Mechanisms and Implication to Aquaculture Flavio Furtado Ribeiro, BSc. MSc. A thesis submitted for the degree of Doctor of Philosophy,
More informationTABLE OF CONTENTS. vii
TABLE OF CONTENTS S. No. Description Page No. CHAPTER-I 1.0 Introduction 1 CHAPTER-II 2.0 Literature Review 5 2.1 History 6 2.2 Formulation Theory 7 2.3 Properties of Nanoparticles 9 2.4 Existing Technologies
More informationGROWTH AND CHARACTERIZATION OF SOME SULPHATE CRYSTALS
GROWTH AND CHARACTERIZATION OF SOME SULPHATE CRYSTALS Thesis Submitted to Bharathiar University in the partial fulfillment of the requirements for the award of Degree of DOCTOR OF PHILOSOPHY IN ELECTRONICS
More informationDoctor of Philosophy
STUDIES ON THE CORROSION INHIBITION BEHAVIOUR OF SOME AMINO ACID SURFACTANT ADDITIVES ABSTRACT SUBMITTED FOR THE AWARD OF THE DEGREE OF Doctor of Philosophy IN APPLIED CHEMISTRY By MOSARRAT PARVEEN UNDER
More informationMODELLING INTERACTION EFFECT OF NANOSILICA PARTICLES ON NANOSILICA/EPOXY COMPOSITE STIFFNESS
MODELLING INTERACTION EFFECT OF NANOSILICA PARTICLES ON NANOSILICA/EPOXY COMPOSITE STIFFNESS Mulyadi a*, I. Gitman a, C. Pinna a, C. Soutis b a Department of Mechanical Engineering, The University of Sheffield,
More informationPrediction of Micromechanical Behaviour of Elliptical Frp Composites
Prediction of Micromechanical Behaviour of Elliptical Frp Composites Kiranmayee.Nerusu Dept. of Mechanical Engg. P. V. P. Siddhartha Institute of Technology, Vijayawada 520 007, A.P, India. P. Phani Prasanthi
More informationEffect of fibre shape on transverse thermal conductivity of unidirectional composites
Sādhanā Vol. 4, Part 2, April 25, pp. 53 53. c Indian Academy of Sciences Effect of fibre shape on transverse thermal conductivity of unidirectional composites B RAGHAVA RAO,, V RAMACHANDRA RAJU 2 and
More informationPROPERTIES OF POLYMERS
PROPERTIES OF POLYMERS THEIR CORRELATION WITH CHEMICAL STRUCTURE; THEIR NUMERICAL ESTIMATION AND PREDICTION FROM ADDITIVE GROUP CONTRIBUTIONS Third, completely revised edition By D.W. VÄN KREVELEN Professor-Emeritus,
More informationENGINEERING BEHAVIOUR AND CLASSIFICATION OF WEATHERED ROCKS
ENGINEERING BEHAVIOUR AND CLASSIFICATION OF WEATHERED ROCKS By ANAND SWAROOP GUPTA A thesis submitted in fulfilment of the requirements for the degree of DOCTOR OF PHILOSOPHY Department of Civil Engineering
More informationAnalysis of contact deformation between a coated flat plate and a sphere and its practical application
Computer Methods and Experimental Measurements for Surface Effects and Contact Mechanics VII 307 Analysis of contact deformation between a coated flat plate and a sphere and its practical application T.
More informationA direct evaluation of the Fabric Tensor in anisotropic porous media
A direct evaluation of the Fabric Tensor in anisotropic porous media Maria Cristina Pernice 1, Luciano Nunziante 1, Massimiliano Fraldi 1,2 1 Department of Structural Engineering, University of Naples
More information[83] RMUTP Research Journal: Special Issue 2014 The 4 th RMUTP International conference: Textiles and Fashion
[83] : 2014 FUNCTIONAL CHARACTERIZATION OF FIBER REINFORCED NANOCOMPOSITES Rajesh Mishra 1*, Richa Tiwari 1, Jiri Militky 1 & B.K.Behera 2 1 Faculty of Textile Engineering, Technical University of Liberec,
More informationAlternative numerical method in continuum mechanics COMPUTATIONAL MULTISCALE. University of Liège Aerospace & Mechanical Engineering
University of Liège Aerospace & Mechanical Engineering Alternative numerical method in continuum mechanics COMPUTATIONAL MULTISCALE Van Dung NGUYEN Innocent NIYONZIMA Aerospace & Mechanical engineering
More informationTwo-step multiscale homogenization of polymer nanocomposites for large size RVEs embodying many nanoparticles
Two-step multiscale homogenization of polymer nanocomposites for large size RVEs embodying many nanoparticles *Kyungmin Baek 1), Hyunseong Shin 2), Jin-Gyu Han 3) and Maenghyo Cho 4) 1), 2), 3), 4) Department
More informationBIO & PHARMA ANALYTICAL TECHNIQUES. Chapter 5 Particle Size Analysis
BIO & PHARMA ANALYTICAL TECHNIQUES Chapter 5 by Dr Siti Umairah Mokhtar Faculty of Engineering Technology umairah@ump.edu.my Chapter Description Aims Discuss theory, principles and application of analytical
More informationMICROMECHANICAL ANALYSIS OF FRP COMPOSITES SUBJECTED TO LONGITUDINAL LOADING
MICROMECHANICAL ANALYSIS OF FRP COMPOSITES SUBJECTED TO LONGITUDINAL LOADING N. Krishna Vihari 1, P. Phani Prasanthi 1, V. Bala Krishna Murthy 2* and A. Srihari Prasad 3 1 Mech. Engg. Dept., P. V. P. Siddhartha
More information3D Compression Molding
Autodesk Simulation Moldflow Insight 2014 3D Compression Molding Executive summary In this work, the simulation results from a program developed for the three-dimensional analysis of compression molding
More informationHOMOGENIZATION OF TRABECULAR BONE MICROSTRUCTURE BASED ON FINITE ELEMENT METHOD AND MICRO COMPUTED TOMOGRAPHY
11th World Congress on Computational Mechanics (WCCM XI) 5th European Conference on Computational Mechanics (ECCM V) 6th European Conference on Computational Fluid Dynamics (ECFD VI) E. Oñate, J. Oliver
More informationINVESTIGATIONS OF Mn, Fe, Ni AND Pb DOPED
INVESTIGATIONS OF Mn, Fe, Ni AND Pb DOPED ZINC SULPHIDE NANOPARTICLES A thesis submitted to the University of Pune FOR THE DEGREE OF DOCTOR of PHILOSOPHY IN PHYSICS by PRAMOD H. BORSE DEPARTMENT OF PHYSICS
More informationNITRILE RUBBER (NBR) NANOCOMPOSITES BASED ON DIFFERENT FILLER GEOMETRIES (Nanocalcium carbonate, Carbon nanotube and Nanoclay)
CHAPTER 5 NITRILE RUBBER (NBR) NANOCOMPOSITES BASED ON DIFFERENT FILLER GEOMETRIES (Nanocalcium carbonate, Carbon nanotube and Nanoclay) 5.1 Introduction Nanocalcium carbonate (NCC) is a particulate nanofiller
More informationResearch Article Multiscale Validation of the Applicability of Micromechanical Models for Asphalt Mixture
Advances in Materials Science and Engineering Volume 2015, Article ID 937126, 8 pages http://dx.doi.org/10.1155/2015/937126 Research Article Multiscale Validation of the Applicability of Micromechanical
More informationSPECTRAL PROPERTIES OF m InGaAsP SEMICONDUCTOR DIODE LASERS JOSEPH EDWARD HAYWARD, B.ENG, M.ENG. A Thesis
SPECTRAL PROPERTIES OF 1.3 11m InGaAsP SEMICONDUCTOR DIODE LASERS By JOSEPH EDWARD HAYWARD, B.ENG, M.ENG A Thesis Submitted to the School of Graduate Studies in Partial Fulfilment of the Requirements for
More informationUNIVERSITY OF NAIROBI GREEN SYNTHESIS OF SILVER NANOPARTICLES USING EUCALYPTUS CORYMBIA LEAVES EXTRACT; CHARACTERIZATION AND ANTIMICROBIAL APPLICATION
GREEN SYNTHESIS OF SILVER NANOPARTICLES USING EUCALYPTUS CORYMBIA LEAVES EXTRACT; CHARACTERIZATION AND ANTIMICROBIAL APPLICATION JOSHUA SILA MUNYAO I56/68845/2011. A thesis submitted in partial fulfillment
More informationMulti-scale mechanics and structure of semi-hard cheese
Multi-scale mechanics and structure of semi-hard cheese T.J. Faber a,b, P.J.Schreurs b, J.M.J.G. Luyten a, H.E.H.Meijer b a FrieslandCampina Research, Deventer, The Netherlands (timo.faber@frieslandcampina.com))
More informationCourse Description. * LC: Lecture; LB: Laboratory; LL: Lecture/Lab; SM: Seminar; SP: Senior Project; IN: Internship; LI: Lecture/Internship
* : Lecture; LB: Laboratory; LL: Lecture/Lab; SM: Seminar; SP: Senior Project; IN: Internship; LI: Lecture/Internship ** FN: Foundation; UG: Undergraduate; DP: Diploma; : Master; CR: Certificate Course
More informationUNDERSTANDING THE INTERFACIAL INTERACTIONS IN SILICA REINFORCED POLYPROPYLENE NANOCOMPOSITES
UNDERSTANDING THE INTERFACIAL INTERACTIONS IN SILICA REINFORCED POLYPROPYLENE NANOCOMPOSITES D. Pedrazzoli a,b*, A. Pegoretti a, K. Kalaitzidou b,c a Department of Industrial Engineering, University of
More informationMechanical Properties of Polymers. Scope. MSE 383, Unit 3-1. Joshua U. Otaigbe Iowa State University Materials Science & Engineering Dept.
Mechanical Properties of Polymers Scope MSE 383, Unit 3-1 Joshua U. Otaigbe Iowa State University Materials Science & Engineering Dept. Structure - mechanical properties relations Time-dependent mechanical
More informationIMPACT PROPERTIES OF POLYMERIC NANOCOMPOSITES WITH DIFFERENT SHAPE OF NANOPARTICLES. Robert VALEK a, Jaroslav HELL a
IMPACT PROPERTIES OF POLYMERIC NANOCOMPOSITES WITH DIFFERENT SHAPE OF NANOPARTICLES Robert VALEK a, Jaroslav HELL a a SVUM, a. s., Podnikatelska 565, 19 11 Prague, Czech Republic, valek@svum.cz Abstract
More informationINTERNATIONAL JOURNAL OF PHARMACEUTICAL RESEARCH AND BIO-SCIENCE
INTERNATIONAL JOURNAL OF PHARMACEUTICAL RESEARCH AND BIO-SCIENCE TO STUDY THE ANALYSIS OF SOLID ORAL DOSAGE FORMS INCLUDING THE DIFFERENT MODERN ANALYTICAL TECHNIQUES PATEL PRIYANKA P., SANGHADIYA DIVYANG
More informationCurriculum Vitae of Physics Department Faculty Members
Kingdom of Saudi Arabia Ministry of education King Khalid University Faculty of sciences for Girls in Abha Curriculum Vitae of Physics Department Faculty Members 1437/1438H (2016/2017G) 1- Dr. Magda Abd-
More informationTHE DECO~WOSITION OF AMMONIA ON TUNGSTEN SURFACES
THE DECO~WOSITION OF AMMONIA ON TUNGSTEN SURFACES THE DECOMPOSITION OF AMMONIA ON TUNGSTEN SURFACES by YU.KWANG PENG, DIPL. CHEM. A Thesis Submitted to the School of Graduate Studies in Partial Fulfilment
More informationCHEM-C2410: Materials Science from Microstructures to Properties Composites: basic principles
CHEM-C2410: Materials Science from Microstructures to Properties Composites: basic principles Mark Hughes 14 th March 2017 Today s learning outcomes To understand the role of reinforcement, matrix and
More informationCOMPARATIVE STUDY OF VARIOUS BEAMS UNDER DIFFERENT LOADING CONDITION USING FINITE ELEMENT METHOD
COMPARATIVE STUDY OF VARIOUS BEAMS UNDER DIFFERENT LOADING CONDITION USING FINITE ELEMENT METHOD A THESIS SUBMITTED IN PARTIAL FULLFILLMENT OF THE REQUIREMENTS FOR THE DEGREE OF Bachelor of Technology
More informationBalancing And Lucas-balancing Numbers With Real Indices
Balancing And Lucas-balancing Numbers With Real Indices A thesis submitted by SEPHALI TANTY Roll No. 413MA2076 for the partial fulfilment for the award of the degree Master Of Science Under the supervision
More informationArchetype-Blending Multiscale Continuum Method
Archetype-Blending Multiscale Continuum Method John A. Moore Professor Wing Kam Liu Northwestern University Mechanical Engineering 3/27/2014 1 1 Outline Background and Motivation Archetype-Blending Continuum
More informationintroduction to SAXS for polymers -a user view-
introduction to SAXS for polymers -a user view- Luigi Balzano DSM Ahead/Material Science Center Geleen, The Netherlands luigi.balzano@dsm.com Synchrotron and Neutron Workshop (SyNeW) 2015 Utrecht, June
More informationDESIGN OF DOWELS FOR SHEAR TRANSFER AT THE INTERFACE BETWEEN CONCRETE CAST AT DIFFERENT TIMES: A CASE STUDY
DESIGN OF DOWELS FOR SHEAR TRANSFER AT THE INTERFACE BETWEEN CONCRETE CAST AT DIFFERENT TIMES: A CASE STUDY Samayamanthree Mudiyanselage Premasiri Karunarathna 118614J Degree of Master of Engineering in
More informationDIGIMAT for NANO-COMPOSITES
DIGIMAT for NANO-COMPOSITES Document Version 2.0.1, February 2010 info@e-xstream.com www.e-xstream.com Materials: Engineering Plastics, Reinforced Plastics, Mineral and Clay fillers. e-xstream Technology:
More informationyou need google earth zoom on campus!
Coupling Advanced Imaging Analysis and Morphology Based Modeling for Integrated Characterization of Micromechanics of Wood and Wood-Based Composites Lech Muszyński & John Nairn Department of Wood Science
More informationMultiscale analyses of the behaviour and damage of composite materials
Multiscale analyses of the behaviour and damage of composite materials Presented by Didier BAPTISTE ENSAM, LIM, UMR CNRS 8006 151 boulevard de l hôpital l 75013 PARIS, France Research works from: K.Derrien,
More informationAuthors: Correspondence: ABSTRACT:
Multi-Scale Modeling of the Impact and Failure of Fiber Reinforced Polymer Structures using DIGIMAT to LS-DYNA Interface Authors: L. Adam, R. Assaker & R. Ramaya e-xstream engineering S.A. 7, Rue du Bosquet.
More informationMechanical Properties of Fiber Reinforced Composites Using Buckminster Fullerene Reinforcement
IJRMET Vo l. 4, Is s u e Sp l - 1, No v 2013- Ap r i l 2014 ISSN : 2249-5762 (Online ISSN : 2249-5770 (Print Mechanical Properties of Fiber Reinforced Composites Using Buckminster Fullerene Reinforcement
More informationEffect of Interlayers on Mechanical Properties and Interfacial Stress Transfer of 2D Layered Graphene- Polymer Nanocompsites
University of Kentucky UKnowledge Theses and Dissertations--Mechanical Engineering Mechanical Engineering 2017 Effect of Interlayers on Mechanical Properties and Interfacial Stress Transfer of 2D Layered
More informationRHEOLOGICAL AND MORPHOLOGICAL PROPERTIES OF NANOCOMPOSITES BASED ON PA66/PA6/MULTI-WALLED CARBON NANOTUBE PREPARED BY MELT MIXING
18 TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS RHEOLOGICAL AND MORPHOLOGICAL PROPERTIES OF NANOCOMPOSITES BASED ON PA66/PA6/MULTI-WALLED CARBON NANOTUBE PREPARED BY MELT MIXING A. M. Hadizadeh 1,
More informationRHEOLOGICAL AND MORPHOLOGICAL INFLUENCES ON THE VISCOELASTIC BEHAVIOUR OF POLYMER COMPOSITES
RHEOLOGICAL AND MORPHOLOGICAL INFLUENCES ON THE VISCOELASTIC BEHAVIOUR OF POLYMER COMPOSITES R. Gaertner 1 and 2, C. Gauthier 1, P. Franciosi 1, A. Khavandi 1 and M. Shaterzadeh 1 1 GEMPPM - UMR 5510,
More informationTHE INFLUENCE OF IN-PLANE DENSITY VARIATION ON ENGINEERING PROPERTIES OF ORIENTED STRANDBOARD: A FINITE ELEMENT SIMULATION
Proceedings of McMat5: 5 Joint ASME/ASCE/SES Conference on Mechanics and Materials June 1-3, 5, Baton Rouge, Louisiana, USA 255 THE INFLUENCE OF IN-PLANE DENSITY VARIATION ON ENGINEERING PROPERTIES OF
More informationMorphology and Thermal studies of Copper Carbonate Nanoparticles
Morphology and Thermal studies of Copper Carbonate Nanoparticles * Dr.R.Hepzi Pramila Devamani 1 V.V.Vanniaperumal College for Women, Virudhunagar, Tamil Nadu, India. M.Shameena Begum 2 & R.Suganthi 3
More informationANALYSIS OF SAND GRADATION EFFECTS ON RELATIVE DENSITY
ANALYSIS OF SAND GRADATION EFFECTS ON RELATIVE DENSITY A thesis submitted in partial fulfilment of the requirements for the degree of Bachelor of Technology In Civil Engineering By Apurv Kumar Siya 110CE0574
More informationSoufiane Belhouideg. Keywords Composite materials, homogenization method, Eshelby s inclusion problem.
Prediction of effective mechanical properties of composite materials using homogenization approach: Application to tungsten fiber reinforced bulk metallic glass matrix composite Soufiane Belhouideg Abstract
More information