This product/component/material was tested to determine the levels of the six hazardous substances in accordance with the standard

Size: px

Start display at page:

Download "This product/component/material was tested to determine the levels of the six hazardous substances in accordance with the standard"

Frank Craig
6 years ago
Views:

1 Test Report issued under the responsibility of: CTS Co., Ltd. 501, Samsung Techno-park, 97, Jungbu-daero 448beon-gil, Yeongtong-gu, Suwon-si, Gyeonggido, Korea TEST REPORT Procedures for the determination of levels of six regulated substances (Lead, Mercury, Cadmium, Hexavalent Chromium, Polybrominated Biphenyls, Polybrominated Diphenyl Ethers) in electrotechnical products Report Reference No.... : CTS-R Date of issue... : Total number of pages pages Testing Laboratory... : Address... : Applicant s name... : Address... : CTS Co., Ltd. 501, Samsung Techno-park, 97, Jungbu-daero 448beon-gil, Yeongtong-gu, Suwon-si, Gyeonggi-do, Korea Techen Co., Ltd. #6-30, Seojae-ro 14gil, Dasa-eup, Dalseong-gun, Dae-gu, Korea Test specification: Standard... : -1: : : : : : 2013 and EN 50581: 2012 Test Report Form No.... : -1A Test Report Form(s) Originator... : SGS Fimko and modified Master TRF... : Dated Directive..: RoHS Directive 2011/65/EU This product/component/material was tested to determine the levels of the six hazardous substances in accordance with the standard Copyright 2008 IEC System for Conformity Testing and Certification of Electrical Equipment (IECEE), Geneva, Switzerland. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the IECEE is acknowledged as copyright owner and source of the material. IECEE takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. If this Test Report Form is used by non-iecee members, the IECEE/IEC logo and the reference to the CB Scheme procedure shall be removed. This report is not valid unless signed by an accepted IECEE HS Testing Laboratory and a Statement of Test Results issued by an NCB in accordance with the IECEE Rules of Procedures. Test item description... : LED Street Light Trade Mark... : Manufacturer... : Material/Component/Series Family/Model/Type reference... : Techen Co., Ltd. Metal, Polymer & Electronic Component TCN-SB-150 Ratings/Characteristics... :

3 Page 3 of 13 Testing... : Date of receipt of test item... : Date (s) of performance of tests... : to General remarks: The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full or the first two pages, without the written approval of the Issuing testing laboratory. "(see Enclosure #)" refers to additional information appended to the report. "(see appended table)" refers to a table appended to the report. Throughout this report a comma (point) is used as the decimal separator. General product information: Appendix I: Verification test results Appendix II: Declaration of RoHS Compliance Appendix III: Photos of products Test Equipment - XRF: Olympus NDT / DCC-2000 Copy of marking plate (if applicable)

4 Page 4 of 13 Appendix I Verification test results 1. Screening test results by XRF No. Sample Description Picture 1 Enclosure 2 Reflector 3 Glass pin 4 Gasket 5 Cable gland sealing sleeve 6 Cable gland O-ring XRF Element Data x Remarks

5 Page 5 of 13 No. Sample Description Picture 7 Cable gland sealing sleeve cover 8 Cable gland body 9 Round head screw 10 Screw 11 Set screw 12 Wrench head screw XRF Element Data x x x x 10 4 Remarks

6 Page 6 of 13 No. Sample Description Picture 13 Hex head screw 14 Nut 15 Flat washer 16 Spring washer 17 LED XRF Element Data x x x x Remarks

7 Page 7 of ICP & GC/MS test results No. Sample Description Picture Element Data Remarks 1 Lens Transpare nt plastic grain PBBs PBDEs 2 MPCB Aluminum Negative PBBs - PBDEs C2700 Negative PBBs Connector 4 KOPA PBDEs PBBs PBDEs

8 Page 8 of results No. Sample Description Result Color Development Remarks 2 Reflector Negative 3 Glass pin Negative 9 Round head screw Negative 10 Screw Negative 11 Set screw Negative 12 Wrench head screw Negative

9 Page 9 of 13 No. Sample Description Result Color Development Remarks 13 Hex head screw Negative 14 Nut Negative 15 Flat washer Negative 16 Spring washer Negative

10 Page 10 of 13 Notes: mg/kg = ppm = parts per million < = Less than = Not detected (< MDL) MDL = Method detection limit N.A. = Not applicable Positive: There are color changes during spot test Negative: There are no color changes during spot test Tests Items XRF ICP GC/MS Screening MDL (mg/kg) limit Cadmium () Lead () Mercury () Chromium () omine () Polybrominated Biphenyl (PBBs) Polybrominated Diphenyl Ether (PBDEs)

11 Page 11 of Evaluation procedures

12 Page 12 of 13 Appendix II Declaration of RoHS Compliance No. Sample Description 1 Glass Model name Manufacture Data Remarks HanGlas Diamant Glass HANGLAS LED Driver PISE-W205D LG INNOTEK

13 Page 13 of 13 Appendix III Photos of products No. Photos No. Photos 1 2 3

Verification Report. No. CANEC Date: 12 Apr Page 1 of 9.

Verification Report. No. CANEC1302893701 Date: 12 Apr 2013. Page 1 of 9. PROMOVER INDUSTRIAL COMPANY LIMITED. N0.34 CHIA SHINE ROAD WAN LUAN VILLAGE PING TUNG COUNTRY 92343 TAIWAN. Sample Name :. SGS Job