Thermodynamics. Heat Capacity Calorimetry Enthalpy Thermodynamic cycles Adiabatic processes. NC State University

Size: px
Start display at page:

Download "Thermodynamics. Heat Capacity Calorimetry Enthalpy Thermodynamic cycles Adiabatic processes. NC State University"

Transcription

1 Thermodynamics Heat Capacity Calorimetry Enthalpy Thermodynamic cycles Adiabatic processes NC State University

2 Motivation The enthalpy change DH is the change in energy at constant pressure. When a change takes place in a system that is open to the atmosphere, the volume of the system changes, but the pressure remains constant. In any chemical reactions that involve the creation or consumption of molecules in the vapor or gas phase there is a work term associated with the creation or consumption of the gas.

3 Molar Enthalpy Enthalpy can be expressed as a molar quantity: H m = H n We can also express the relationship between enthalpy and internal energy in terms of molar quantities: H m = U m + PV m For an ideal or perfect gas this becomes: H m = U m + RT Usually when we write DH for a chemical or physical change we refer to a molar quantity for which the units are kj/mol.

4 Enthalpy for reactions involving gases If equivalents of gas are produced or consumed in a chemical reaction, the result is a change in pressure-volume work. This is reflected in the enthalpy as follows. DH = DU + PDV which can be rewritten for an ideal gas: DH = DU + DnRT at const. T and P at const. T and P The number of moles n is the number of moles created or absorbed during the chemical reaction. For example, CH 2 =CH 2 (g) + H 2 (g) CH 3 CH 3 (g) Dn = -1 We arrive at this value from the formula Dn = n products - n reactants = 1-2 = -1

5 The measurement of heat We must carefully distinguish between heat and temperature. When we add heat to the system its temperature increases. We can use measurement of the temperature to determine how much heat has been added. However, we need to know the heat capacity of the system in order to do this. Heat capacity = Heat supplied Temperature rise The heat capacity is called C. If we perform a heat exchange at constant volume then we designate the heat capacity as C V. If the process occurs at constant pressure we call the heat capacity C P. C V,P = q V,P DT

6 Molar and Specific Heat Capacities We use molar heat capacities for pure substances. As the name implies the units are J/mol-K for the molar heat capacity. We write the molar heat capacity at constant volume as C V,m. For mixtures we cannot use a molar heat capacity and so we use the specific heat capacity, which is the heat capacity per gram of material with units of J/g-K.

7 Heat Capacity for a Diatomic Molecule For a diatomic molecule there is contribution from rotations as well as translations. This means that as heat is added to the system the rotational levels can be populated in addition to an increase in molecular speed. The kinetic theory of gases considers only the speed. An approximate rule is that we obtain a contribution to the heat capacity, C V of 1/2nR for each degree of freedom. We saw that for a monatomic gas the heat capacity was C V = 3/2nR. A diatomic gas has two rotational degrees of freedom and so the heat capacity is approximately C V = 5/2nR. What does this say about C P? Well, the relationship between C P and C V holds for all gases so C P = 7/2nR for a diatomic ideal gas.

8 The temperature dependence of the enthalpy change Based on the discussion the heat capacity from the last lecture we can write the temperature dependence of the enthalpy change as: DH = C P DT Note that we can use tabulated values of enthalpy at 298 K and calculate the value of the enthalpy at any temperature of interest. We will see how to use this when we consider the enthalpy change of chemical reactions (the standard enthalpy change). The basic physics of all temperature dependence is contained in the above equation or more frequently in the equation below as molar quantity: DH m = C P,m DT

9 Another view of the heat capacity At this point it is worth noting that the expressions for the heat capacity at constant volume and constant pressure can be related to the temperature dependence of U and H, respectively. DH = C P DT DU = C V DT C P = DH DT = H T P C V = DU DT = U T V The heat capacity is the rate of change of the energy with temperature. The partial derivative is formal way of saying this.

10 Variation in Reaction Enthalpy with Temperature Since standard enthalpies are tabulated at 298 K we need to determine the value of the entropy at the temperature of the reaction using heat capacity data. Although we have seen this procedure in the general case the calculation for chemical reactions is easier if you start by calculating the heat capacity difference between reactants and products: D r C P = C P (products) C P (reactants) and then substitute this into the expression: D r H (T 2 ) = D r H (T 1 ) + D r C P dt If the heat capacities are all constant of the temperature range then: D r H (T 2 ) = D r H (T 1 ) + D r C P DT T 2 T 1

11 Calorimetry The science of heat measurement is called calorimetry. A calorimeter consists of a container in a heat bath. A physical or chemical process occurs in the container and heat is added or removed from the heat bath. The temperature increases or decreases as result. By knowing the heat capacity of the bath we can measure the amount of heat that has been added or removed from the system. Energy in the form of heat flows into the bath.

12 Calorimetry In the studies of biological systems there are two important types of calorimetry. 1. Differential scanning calorimetry (DSC) 2. Isothermal titration calorimetry (ITC) In DSC the temperature is increased at a constant heating rate and the heat capacity is measured. DSC is used for determining the parameters associated with phase transitions e.g. protein unfolding, denaturation, DNA hybridization etc. In ITC the temperature is held constant while one component is added to another. The heat of interaction (e.g. binding) is measured using this method. ITC is widely used to determine the enthalpy of binding, e.g. for protein-protein and protein-drug interactions among other types of biological applications.

13 A note on using current flow in calorimetry measurements Energy is measured in Joules. Electrical energy is used to delivery heat in calorimetry applications. In electrostatics the units of energy are: Joules = Coulombs * Volts J = CV Coulomb is a unit of charge and volt is a unit of potential. A charge moving through a potential is a little like a waterfall. The problem here is that we need a dynamic description since moving charge is not static. C V O

14 A note on using current flow in calorimetry measurements As charge moves through the potential energy (heat) is Released. Power = Amperes * Volts W = IV Power has units of energy per unit time. So as the current flows through a wire at a certain rate, heat energy is added to the system at that rate. C V O

15 A note on using current flow in calorimetry measurements As charge moves through the potential energy (heat) is Released. Power = Amperes * Volts W = IV Power has units of energy per unit time. So as the current flows through a wire at a certain rate, heat energy is added to the system at that rate. C V O

16 A note on using current flow in calorimetry measurements As charge moves through the potential energy (heat) is Released. Power = Amperes * Volts W = IV Power has units of energy per unit time. So as the current flows through a wire at a certain rate, heat energy is added to the system at that rate. C V O

17 A note on using current flow in calorimetry measurements As charge moves through the potential energy (heat) is Released. Power = Amperes * Volts W = IV Power has units of energy per unit time. So as the current flows through a wire at a certain rate, heat energy is added to the system at that rate. C V O

18 A note on using current flow in calorimetry measurements As charge moves through the potential energy (heat) is Released. Power = Amperes * Volts W = IV Power has units of energy per unit time. So as the current flows through a wire at a certain rate, heat energy is added to the system at that rate. C V O

19 A note on using current flow in calorimetry measurements Over a period of time, t, the total energy added to the system is: Energy = Amperes * Volts * time E = IVt This equation is used in the text to describe a number of calorimetry applications. C V O

20 The standard state The standard state of a substance is its pure form a 1 bar of pressure or 1 molar concentration. The standard state can have any temperature, but the temperature should be specified. For example, the standard enthalpy of vaporization of water Is the enthalpy of vaporization at 373 K (the boiling point) and 1 bar of pressure. If we lower the temperature below 373 K (for example to 372 K) then water no longer boils. We can say that the reaction is defined at the standard state of 1 bar (or 1 atm in practice) of pressure. A reaction can take place at concentrations other than the standard state, but there will be a dependence of the enthalpy on pressure. Vaporization is a special case since the atmosphere is always at 1 atm at sea level.

21 Enthalpy of physical change A physical change is when one state of matter changes into another state of matter of the same substance. The difference between physical and chemical changes is not always clear, however, phase transitions are obviously physical changes. Fusion Freezing DH fus DH vap Solid Liquid Gas DH freeze DH cond Vaporization Condensation Sublimation DH sub Solid Vapor Deposition DH vap dep Gas

22 Properties of Enthalpy as a State Function The fact that enthalpy is a state function is useful for the additivity of enthalpies. Clearly the enthalpy of forward and reverse processes must be related by: D forw ard H = D reverse H so that the phase changes are related by: D fus H = D freeze H D vap H = D cond H D sub H = D vap dep H Moreover, it should not matter how the system is transformed from the solid phase to the gas phase. The two processes of fusion (melting) and vaporization have the same net enthalpy as sublimation.

23 Addivity of Enthalpies Because the enthalpy is a state function the same magnitude must be obtained for direct conversion from solid to gas as for the indirect conversion solid to liquid and then liquid to gas. D sub H = D fus H + D vap H Of course, these enthalpies must be measured at the same temperature. Otherwise an appropriate correction would need to be applied as described in the section on the temperature dependence of the enthalpy.

24 Chemical Change In a chemical change the identity of substances is altered during the course of a reaction. One example is the hydrogenation of ethene: CH 2 =CH 2 (g) + H 2 (g) CH 3 CH 3 (g) DH = -137 kj/mol The negative value of DH signifies that the enthalpy of the system decreases by 137 kj/mol and, if the reaction takes place at constant pressure, 137 kj/mol of heat is released into the surroundings, when 1 mol of CH 2 =CH 2 combines with 1 mol of H 2 at 25 o C.

25 Standard Enthalpies of Formation The standard enthalpy of formation D f H o is the enthalpy for formation of a substance from its elements in their standard states. The reference state of an element is its most stable form at the temperature of interest. The enthalpy of formation of the elements is zero. For example, let s examine the formation of water. H 2 (g) + 1/2 O 2 (g) H 2 O(l) DH o = -286 kj Therefore, we say that D f H o (H 2 O, l) = -286 kj/mol. Although D f H o for elements in their reference states is zero, D f H o is not zero for formation of an element in a different phase: C(s, graphite) C(s, diamond) D f H o = kj/mol

26 Standard Enthalpy Changes The reaction enthalpy depends on conditions (e.g. T and P). It is convenient to report and tabulate information under a standard set of conditions. Corrections can be made using heat capacity for variations in the temperature. Corrections can also be made for variations in the pressure. When we write DH in a thermochemical equation, we always mean the change in enthalpy that occurs when the reactants change into the products in their respective standard states.

27 Standard Reaction Enthalpy The standard reaction enthalpy, D r H o, is the difference between the standard molar enthalpies of the reactants and products, with each term weighted by the stoichiometric coefficient,, The standard state is for reactants and products at 1 bar of pressure or 1 molar concentration. The unit of energy used is kj/mol. The temperature is not part of the standard state and it is possible to speak of the standard state of oxygen gas at 100 K, 200 K etc. It is conventional to report values at 298 K and unless otherwise specified all data will be reported at that temperature.

28 Hess s Law We often need a value of DH that is not in the thermochemical tables. We can use the fact that DH is a state function to advantage by using sums and differences of known quantities to obtain the unknown. We have already seen a simple example of this using the sum of DH of fusion and DH of vaporization to obtain DH of sublimation. Hess s law is a formal statement of this property. The standard enthalpy of a reaction is the sum of the standard enthalpies of the reactions into which the overall reaction may be divided.

29 Application of Hess s Law We can use the property known as Hess s law to obtain a standard enthalpy of combustion for propene from the two reactions: C 3 H 6 (g) + H 2 (g) C 3 H 8 (g) DH = -124 kj C 3 H 8 (g) + 5O 2 (g) 3CO 2 (g) + 4H 2 O(l) DH = kj If we add these two reactions we get: C 3 H 6 (g) + H 2 (g) + 5O 2 (g) 3CO 2 (g) + 4H 2 O(l) DH = kj and now we can subtract: H 2 (g) + 1/2O 2 (g) H 2 O(l) DH = -286 kj to obtain: C 3 H 6 (g) + 9/2O 2 (g) 3CO 2 (g) + 3H 2 O(l) DH = kj

30 Understanding the additivity of enthalpies Calculate D rxn H o for the rxn : 2 SO 3 (g) 2 SO 2 (g) + O 2 (g) given the following : a) S(s) + O 2 (g) SO 2 (g) D f H o = -297 kj b) S(s) + 3 / 2 O 2 (g) SO 3 (g) D f H o = -396 kj

31 Enthalpy of solution Note the trends in the heats of solution for these common compounds. SOLUTE hydrochloric acid ΔH o in kj/mol ammonium nitrate ammonia potassium hydroxide caesium hydroxide sodium chloride potassium chlorate acetic acid sodium hydroxide

32 Tabulated bond enthalpies Bond pm kj/mol Bond pm kj/mol H H C C H C C=C C C C N H N CºC N N C O H O C S O O O O H F C F F F O=O H Cl C Cl Cl-Cl C Br H Br N N Br-Br C I H I NºN I I

33 Thermodynamic cycles The energies and enthalpies of ionic solids are dominated by Coulombic interactions. The lattice enthalpy can be calculated from Coulombic interactions. Using the calculated lattice enthalpy and experimental data one can obtain the enthalpy of formation of an ionic solid by means of the Born-Haber cycle. This is illustrated on the next slide for a generic salt of a monovalent ion M + X -. The reactions needed to obtain M + X - in the solid phase to M + + X - in the vapor phase are given below. The overall process of separating the ions in an ionic solid into the constituent ions is written as M + X - (s) M + (g) + X - (g) Lattice enthalpy

34 Enthalpies of Ionization The molar enthalpy of ionization is the enthalpy that accompanies the removal of an electron from a gas phase atom or ion: H(g) H + (g) + e - (g) DH o = kj/mol For ions that are in higher charge states we must consider successive ionizations to reach that charge state. For example, for Mg we have: Mg(g) Mg + (g) + e - (g) DH o = +738 kj/mol Mg + (g) Mg 2+ (g) + e - (g) DH o = kj/mol We shall show that these are additive so that the overall enthlalpy change is 2189 kj/mol for the reaction: Mg(g) Mg 2+ (g) + 2e - (g) DH o = kj/mol

35 Electron Gain Enthalpy The reverse of ionization is electron gain. The corresponding enthalpy is called the electron gain enthalpy. For example: Cl(g) + e - (g) Cl - (g) DH = -349 kj/mol The sign can vary for electron gain. Sometimes, electron gain is endothermic. The combination of ionization and electron gain enthalpy can be used to determine the enthalpy of formation of salts. Other types of processes that are related include molecular dissociation reactions.

36 The Born-Haber cycle The thermodynamic cycle is illustrated. The scheme shows that if one knows all of the energies except one (difficult to measure) quantity, one can calculate it using Hess law. M + X - Lattice Enthalpy M + + X - Enthalpy of Formation 1/2 X 2 (g) + M (s) Ionization Potential Enthalpy of Vaporization M (s) Electron Affinity Bond Dissociation X (g)

37 Using enthalpies of formation Calculate the enthalpy change for the following rxn: NH 3 (g) + O 2 (g) NO(g) + H 2 O(g)

38 Using enthalpies of formation Calculate the enthalpy change for the following rxn: 4 NH 3 (g) + 5 O 2 (g) 4 NO(g) + 6 H 2 O(g) Solution: Look up the enthalpies of formation of each molecule in the thermodynamic tables. Remember that the enthalpy of formation of O 2 is zero.

39 Using enthalpies of formation Calculate the enthalpy change for the following rxn: 4 NH 3 (g) + 5 O 2 (g) 4 NO(g) + 6 H 2 O(g) Solution: Look up the enthalpies of formation of each molecule in the thermodynamic tables. Remember that the enthalpy of formation of O 2 is zero.

40 Enthalpies of Combustion Standard enthalpies of combustion refer to the complete combination with oxygen to carbon dioxide and water. For example, for methane we have: CH 4 (g) + 2O 2 (g) CO 2 (g) + 2H 2 O(l) D comb H o = -890 kj/mol Enthalpies of combustion are commonly measured in a bomb calorimeter (a constant volume device). Thus, DU m is measured. To convert from DU m to DH m we need to use the relationship: DH m = DU m + D gas RT The quantity D gas is the change in the stoichiometric coefficients of the gas phase species. We see in the above express that D gas = -2. Note that H 2 O is a liquid.

41 Enthalpy of formation from combustion The enthalpy of combustion D comb H o for propane, C 3 H 8, is kj. What is D f H o of C 3 H 8?

42 Enthalpy of formation from combustion The enthalpy of combustion D comb H o for propane, C 3 H 8, is kj. What is D f H o of C 3 H 8? Solution: Write down the balanced equation Look up the enthalpies of formation of the CO 2 and H 2 O. Remember that the enthalpy of formation of O 2 is zero. The tabulated values of enthalpy are given at 298 K, Keep in mind that H 2 O is in the liquid phase.

43 Enthalpy of formation from combustion The enthalpy of combustion, D comb H o for propane, C 3 H 8, is kj. What is DH o f of C 3 H 8? Solution: Write down the balanced equation

44 Enthalpy of formation What is the enthalpy of combustion for propane, C 3 H 8 assuming that water is in the vapor phase? Solution: Write down the balanced equation Look up the enthalpies of formation of the CO 2 and H 2 O. Remember that the enthalpy of formation of O 2 is zero.

45 Expansion following combustion What volume of gas is produced if 50 grams of C 3 H 8 is combusted at 373 K at 1 atm? You may assume all molecules are in the vapor phase.

46 Expansion following combustion What volume of gas is produced if 50 grams of C 3 H 8 is combusted? You may assume all molecules are in the vapor phase (T = 373 K). Solution: Write down the balanced equation Calculate the change in number of moles of gas, Dn gas. Then calculate DV.

47 Expansion following combustion What volume of gas is produced if 50 grams of C 3 H 8 is combusted? You may assume all molecules are in the vapor phase. Solution: Write down the balanced equation Calculate the change in number of moles of gas, Dn gas. Then calculate DV. Dn gas = S n products S n reactants Dn gas = = 1

48 Work done following combustion How much work can be extracted for an expansion against a constant pressure of 10 atm if 50 grams of C 3 H 8 is combusted? You may assume all molecules are in the vapor phase at 373 K.A

49 Work done following combustion How much work can be extracted for an expansion against a constant pressure of 10 atm if 50 grams of C 3 H 8 is combusted? You may assume all molecules are in the vapor phase.

50 Comparing fuels on a mass basis We can consider the heat released upon combustion as the energy available to do work in an engine. If we consider hydrocarbon fuels (methane, ethane, propane, butane, and octane) as well as ethanol, we can compare them both on a per mole and per mass basis. The mole basis is obtained using the enthalpy of combustion.

51 Comparing fuels on a mass basis Fuel D comb H o CH C 2 H C 3 H C 4 H C 8 H C 2 H 6 O -1370

52 Comparing fuels on a mass basis Fuel D comb H o M m CH C 2 H C 3 H C 4 H C 8 H C 2 H 6 O

53 Comparing fuels on a mass basis Fuel D comb H o M m q (kj/gram) CH C 2 H C 3 H C 4 H C 8 H C 2 H 6 O

54 Methane vs. Methanol as a fuel On a per mole basis methane and methanol have similar enthalpies of combustion. On a mass basis methanol provides 22 kj/g while methane produces 55 kj/g. Methanol is convenient because it is a liquid.

55 Atmospheric methane: a greenhouse gas

56

57 Methane Capture: An important ecological problem On a per mole basis methane is converted to methanol with a heat of reaction of kj/ mol. The direct conversion shown above does not work well because it is slow unless the temperature is so high that one risks complete oxidation to CO 2.

58 Methane Conversion via Syngas The conversion of CH 4 to syngas is the most common industrial method for producing CH 3 OH from CH 4. The first step or production of syngas is called cracking. The second step requires a Cu or Pd catalyst. The overall process is only about 10% efficient.

59 Photochemical Methane Conversion An alternative approach is to use light to activate water in order to make a hydroxyl radical, which then reacts with methane. This process requires sufficient light energy to cleave the HO-H bond in H 2 O.

60 Methane Monooxygenase

61

62

63 Heating of a fuel in an engine The combustion of a fuel leads to heating of the gas produced in the reaction. The heating can be calculated using the heat capacity (or specific heat). For octane, c p = J/mol/K. What is the s (the specific heat)?

64 Heating of a fuel in an engine Consider the fact that after combustion the octane fuel has been converted into CO 2 and H 2 O in the vapor phase. For H 2 O vapor, c p = 33 J/mol/K. What is the final temperature if 12 microliters of octane are combusted?

65 Focus on energy The work done in the internal combustion engine is called pressure volume work. For a simple irreversible stroke the work is: work = P DV In a 3.0 L 6 cylinder engine DV = 0.5 L. Assuming the initial volume is 80 microliters, what is P? We can estimate the pressure from the amount of octane is injected and combusted

66 From combustion to useful work A typical fuel injector will inject 12 microliters of octane fuel per stroke. What is the pressure of the gas created by combustion in a volume of 80 microliters? In our first examination of this problem we will ignore the heating and simply calculate the conversion from the volume of liquid fuel to the volume of H 2 O and CO 2 according to the reaction stoichiometry.

67 Calculating pressure First convert from volume to moles: The change in the number of moles is: Therefore the pressure is: The pressure is ~100 atm.

68 Solar Heating

69 Equilibration In an equilibration two objects that are initially at different temperatures come to equilibrium at a final temperature. For example, in a solar water heater we can imagine that a slab of black stone acts as the absorber. If the stone has a mass of 20 kg and a temperature of 80 o C. What is the final temperature of 1 L of water that is initially at 10 o C? (for H 2 O s 1 = 4.18 J/g- o C and stone s 2 = 0.5 J/g- o C )

70 Equilibration In an equilibration two objects that are initially at different temperatures come to equilibrium at a final temperature. For example, in a solar water heater we can imagine that a slab of black stone acts as the absorber. If the stone has a mass of 20 kg and a temperature of 80 o C. What is the final temperature of 1 L of water that is initially at 10 o C? (for H 2 O s 1 = 4.18 J/g- o C and stone s 2 = 0.5 J/g- o C )

71 Biological implications Obviously, the food we eat release heat in our bodies. This heat is used both to maintain body temperature and for processes that build up our bodies (anabolic processes). We often talk about calories in the food we eat. The calorie on a cereal box is equal to 1000 calories in the chemical nomenclature. 1 calorie = Joules. Therefore, the Intake required for an average man of 12 MJ/day is about 3000 calories per day (in the sense of diet).

72 Differential relationships for enthalpy We have defined a relationship between the enthalpy and Internal energy H = U + PV The infinitesimal change in the state function H results in H + dh = U + du + (P + dp)(v + dv) Therefore dh = du + PdV + VdP Now we substitute du = dq + dw into this expression dh = dq + dw + PdV + VdP Since dw = - PdV dh = dq + VdP At constant pressure, dp = 0, and we have dh = dq P

73 Path Functions We have seen that work and heat are path functions. The magnitude of the work and heat depends not just on the final values of the T and P, but also on the path taken. We can summarize the paths and their implications in the table below. Path Condition Result Isothermal DT = 0 w = -q Constant V DV = 0 w = 0, DU = C v DT Constant P DP = 0 w = -PDV, q P = C p DT Adiabatic q = 0 DU = w

74 State Functions At present we have introduced two state functions: Internal Energy DU Enthalpy DH State functions do not depend on the path, only on the value of the variables. We can make the analogy with elevation. The potential energy at an elevation h, which we call V(h) does not depend on how we got to that elevation. If we compare V(h 1 ) in Raleigh to V(h 2 ) on Mt. Mitchell the difference V(h 2 ) - V(h 1 ) is the same regardless of whether we drive to Mt. Mitchell through Statesville or Asheville. The work we do to get (i.e. how much gas we use in a car!) is a path function.

Lecture 7 Enthalpy. NC State University

Lecture 7 Enthalpy. NC State University Chemistry 431 Lecture 7 Enthalpy NC State University Motivation The enthalpy change ΔH is the change in energy at constant pressure. When a change takes place in a system that is open to the atmosphere,

More information

Chemical Thermodynamics

Chemical Thermodynamics Quiz A 42.8 ml solution of ammonia (NH 3 ) is titrated with a solution of 0.9713 M hydrochloric acid. The initial reading on the buret containing the HCl was 47.13 ml and the final reading when the endpoint

More information

Brown, LeMay Ch 5 AP Chemistry Monta Vista High School

Brown, LeMay Ch 5 AP Chemistry Monta Vista High School Brown, LeMay Ch 5 AP Chemistry Monta Vista High School 1 From Greek therme (heat); study of energy changes in chemical reactions Energy: capacity do work or transfer heat Joules (J), kilo joules (kj) or

More information

First Law of Thermodynamics: energy cannot be created or destroyed.

First Law of Thermodynamics: energy cannot be created or destroyed. 1 CHEMICAL THERMODYNAMICS ANSWERS energy = anything that has the capacity to do work work = force acting over a distance Energy (E) = Work = Force x Distance First Law of Thermodynamics: energy cannot

More information

Thermochemistry. Energy. 1st Law of Thermodynamics. Enthalpy / Calorimetry. Enthalpy of Formation

Thermochemistry. Energy. 1st Law of Thermodynamics. Enthalpy / Calorimetry. Enthalpy of Formation THERMOCHEMISTRY Thermochemistry Energy 1st Law of Thermodynamics Enthalpy / Calorimetry Hess' Law Enthalpy of Formation The Nature of Energy Kinetic Energy and Potential Energy Kinetic energy is the energy

More information

Thermochemistry: Energy Flow and Chemical Reactions

Thermochemistry: Energy Flow and Chemical Reactions Thermochemistry: Energy Flow and Chemical Reactions Outline thermodynamics internal energy definition, first law enthalpy definition, energy diagrams, calorimetry, theoretical calculation (heats of formation

More information

Chapter 8 Thermochemistry: Chemical Energy

Chapter 8 Thermochemistry: Chemical Energy Chapter 8 Thermochemistry: Chemical Energy 國防醫學院生化學科王明芳老師 2011-11-8 & 2011-11-15 Chapter 8/1 Energy and Its Conservation Conservation of Energy Law: Energy cannot be created or destroyed; it can only be

More information

Chapter 5 Thermochemistry

Chapter 5 Thermochemistry Chapter 5 Thermochemistry Learning Outcomes: Interconvert energy units Distinguish between the system and the surroundings in thermodynamics Calculate internal energy from heat and work and state sign

More information

Energy is the capacity to do work

Energy is the capacity to do work 1 of 10 After completing this chapter, you should, at a minimum, be able to do the following. This information can be found in my lecture notes for this and other chapters and also in your text. Correctly

More information

The Nature of Energy Energy is the ability to do work or produce Heat, q or Q, is ; flows due to temperature differences (always to )

The Nature of Energy Energy is the ability to do work or produce Heat, q or Q, is ; flows due to temperature differences (always to ) CP Chapter 17 Thermochemistry 2014-2015 Thermochemistry Thermochemistry is the study of energy that occur during chemical and physical changes (changes of state) The Nature of Energy Energy is the ability

More information

LECTURE 4 Variation of enthalpy with temperature

LECTURE 4 Variation of enthalpy with temperature LECTURE 4 Variation of enthalpy with temperature So far, we can only work at 25 C. Like c v we define a constant pressure heat capacity, c p, as the amount of heat energy needed to raise the temperature

More information

Thermochemistry: Heat and Chemical Change

Thermochemistry: Heat and Chemical Change Thermochemistry: Heat and Chemical Change 1 Heat or Thermal Energy (q) Heat is a form of energy Is heat the same as temperature? Heat flows between two objects at different temperatures. Hot Cold 2 Chemical

More information

Chem 121 G. Thermochemistry

Chem 121 G. Thermochemistry Chem 121 G. Thermochemistry Energy 1 st law Enthalpy, enthalpy of combustion, fuels Calorimetry Enthalpy of reaction Hess's Law, calculations Energy Energy: capacity to do work or transfer heat Matter

More information

Introduction to Thermochemistry. Thermochemistry Unit. Definition. Terminology. Terminology. Terminology 07/04/2016. Chemistry 30

Introduction to Thermochemistry. Thermochemistry Unit. Definition. Terminology. Terminology. Terminology 07/04/2016. Chemistry 30 Thermochemistry Unit Introduction to Thermochemistry Chemistry 30 Definition Thermochemistry is the branch of chemistry concerned with the heat produced and used in chemical reactions. Most of thermochemistry

More information

Chemical Thermodynamics. Chemical Thermodynamics. Changes of State. Chemical Thermodynamics. State Functions. State Functions 11/25/13

Chemical Thermodynamics. Chemical Thermodynamics. Changes of State. Chemical Thermodynamics. State Functions. State Functions 11/25/13 Chemical Thermodynamics n Thermodynamics is the study of the energetics and order of a system. n A system is the thing we want to study it can be a chemical reaction, a solution, an automobile, or the

More information

Chapter 5 Principles of Chemical Reactivity: Energy and Chemical Reactions

Chapter 5 Principles of Chemical Reactivity: Energy and Chemical Reactions Chapter 5 Principles of Chemical Reactivity: Energy and Chemical Reactions Jeffrey Mack California State University, Sacramento Energy & Chemistry Questions that need to be addressed: How do we measure

More information

Unit 7 Thermochemistry Chemistry 020, R. R. Martin

Unit 7 Thermochemistry Chemistry 020, R. R. Martin Unit 7 Thermochemistry Chemistry 020, R. R. Martin 1. Thermochemistry Heat is a form of energy - which may take many forms: - Kinetic energy due to motion, ½ mv 2 - Potential energy due to position - Electrical

More information

Topic 05 Energetics : Heat Change. IB Chemistry T05D01

Topic 05 Energetics : Heat Change. IB Chemistry T05D01 Topic 05 Energetics 5.1-5.2: Heat Change IB Chemistry T05D01 5.1 Exothermic and endothermic reactions - 1 hour 5.1.1 Define the terms exothermic reaction, endothermic reaction and standard enthalpy change

More information

Enthalpy and Adiabatic Changes

Enthalpy and Adiabatic Changes Enthalpy and Adiabatic Changes Chapter 2 of Atkins: The First Law: Concepts Sections 2.5-2.6 of Atkins (7th & 8th editions) Enthalpy Definition of Enthalpy Measurement of Enthalpy Variation of Enthalpy

More information

I PUC CHEMISTRY CHAPTER - 06 Thermodynamics

I PUC CHEMISTRY CHAPTER - 06 Thermodynamics I PUC CHEMISTRY CHAPTER - 06 Thermodynamics One mark questions 1. Define System. 2. Define surroundings. 3. What is an open system? Give one example. 4. What is closed system? Give one example. 5. What

More information

Section 9: Thermodynamics and Energy

Section 9: Thermodynamics and Energy Section 9: Thermodynamics and Energy The following maps the videos in this section to the Texas Essential Knowledge and Skills for Science TAC 112.35(c). 9.01 Law of Conservation of Energy Chemistry (11)(A)

More information

Enthalpies of Reaction

Enthalpies of Reaction Enthalpies of Reaction Enthalpy is an extensive property Magnitude of H is directly related to the amount of reactant used up in a process. CH 4 (g) + 2O 2 (g) CO 2 (g) + 2H 2 O(l) H = 890 kj 2CH 4 (g)

More information

Chapter 5 Practice Multiple Choice & Free

Chapter 5 Practice Multiple Choice & Free Name Response 1. A system has an increase in internal energy, E, of 40 kj. If 20 kj of work, w, is done on the system, what is the heat change, q? a) +60 kj d) -20 kj b) +40 kj e) -60 kj c) +20 kj 2. Which

More information

ENERGY (THERMOCHEMISTRY) Ch 1.5, 6, 9.10, , 13.3

ENERGY (THERMOCHEMISTRY) Ch 1.5, 6, 9.10, , 13.3 ENERGY (THERMOCHEMISTRY) Ch 1.5, 6, 9.10, 11.5-11.7, 13.3 Thermochemistry Prediction and measurement of energy transfer, in the form of heat, that accompanies chemical and physical processes. Chemical

More information

Energy Heat Work Heat Capacity Enthalpy

Energy Heat Work Heat Capacity Enthalpy Energy Heat Work Heat Capacity Enthalpy 1 Prof. Zvi C. Koren 20.07.2010 Thermodynamics vs. Kinetics Thermodynamics Thermo = Thermo + Dynamics E (Note: Absolute E can never be determined by humans!) Can

More information

Ch. 6 Enthalpy Changes

Ch. 6 Enthalpy Changes Ch. 6 Enthalpy Changes Energy: The capacity to do work. In Physics, there are 2 main types of energy Kinetic (energy of motion) = ½ mv 2 Potential (energy of position due to gravity)= mgh In Chemistry,

More information

Name Date Class THE FLOW OF ENERGY HEAT AND WORK

Name Date Class THE FLOW OF ENERGY HEAT AND WORK 17.1 THE FLOW OF ENERGY HEAT AND WORK Section Review Objectives Explain the relationship between energy, heat, and work Distinguish between exothermic and endothermic processes Distinguish between heat

More information

The Nature of Energy. Chapter Six: Kinetic vs. Potential Energy. Energy and Work. Temperature vs. Heat

The Nature of Energy. Chapter Six: Kinetic vs. Potential Energy. Energy and Work. Temperature vs. Heat The Nature of Energy Chapter Six: THERMOCHEMISTRY Thermodynamics is the study of energy and its transformations. Thermochemistry is the study of the relationship between chemical reactions and energy changes

More information

Chapter Objectives. Chapter 9 Energy and Chemistry. Chapter Objectives. Energy Use and the World Economy. Energy Use and the World Economy

Chapter Objectives. Chapter 9 Energy and Chemistry. Chapter Objectives. Energy Use and the World Economy. Energy Use and the World Economy Chapter Objectives Larry Brown Tom Holme www.cengage.com/chemistry/brown Chapter 9 Energy and Chemistry Explain the economic importance of conversions between different forms of energy and the inevitability

More information

CHAPTER 3 THE FIRST LAW OF THERMODYNAM- ICS

CHAPTER 3 THE FIRST LAW OF THERMODYNAM- ICS CHAPTER 3 THE FIRST LAW OF THERMODYNAM- ICS Introduction In this chapter, we discuss the First Law of Thermodynamics (energy cannot be created or destroyed). In our discussion, we will define some important

More information

(a) graph Y versus X (b) graph Y versus 1/X

(a) graph Y versus X (b) graph Y versus 1/X HOMEWORK 5A Barometer; Boyle s Law 1. The pressure of the first two gases below is determined with a manometer that is filled with mercury (density = 13.6 g/ml). The pressure of the last two gases below

More information

General Chemistry I. Dr. PHAN TẠI HUÂN Faculty of Food Science and Technology Nong Lam University. Module 4: Chemical Thermodynamics

General Chemistry I. Dr. PHAN TẠI HUÂN Faculty of Food Science and Technology Nong Lam University. Module 4: Chemical Thermodynamics General Chemistry I Dr. PHAN TẠI HUÂN Faculty of Food Science and Technology Nong Lam University Module 4: Chemical Thermodynamics Zeroth Law of Thermodynamics. First Law of Thermodynamics (state quantities:

More information

Slide 1 / Objects can possess energy as: (a) endothermic energy (b) potential energy (c) kinetic energy. a only b only c only a and c b and c

Slide 1 / Objects can possess energy as: (a) endothermic energy (b) potential energy (c) kinetic energy. a only b only c only a and c b and c Slide 1 / 84 1 Objects can possess energy as: (a) endothermic energy (b) potential energy (c) kinetic energy A B C D E a only b only c only a and c b and c Slide 2 / 84 2 The internal energy of a system

More information

Chapter 8 Thermochemistry: Chemical Energy. Chemical Thermodynamics

Chapter 8 Thermochemistry: Chemical Energy. Chemical Thermodynamics Chapter 8 Thermochemistry: Chemical Energy Chapter 8 1 Chemical Thermodynamics Chemical Thermodynamics is the study of the energetics of a chemical reaction. Thermodynamics deals with the absorption or

More information

Chapter 5. Thermochemistry

Chapter 5. Thermochemistry Chapter 5 Thermochemistry Dr. A. Al-Saadi 1 Preview Introduction to thermochemistry: Potential energy and kinetic energy. Chemical energy. Internal energy, work and heat. Exothermic vs. endothermic reactions.

More information

_ + Units of Energy. Energy in Thermochemistry. Thermochemistry. Energy flow between system and surroundings. 100º C heat 50º C

_ + Units of Energy. Energy in Thermochemistry. Thermochemistry. Energy flow between system and surroundings. 100º C heat 50º C Units of Energy Like we saw with pressure, many different units are used throughout the world for energy. SI unit for energy 1kg m 1J = 2 s 2 Joule (J) calorie (cal) erg (erg) electron volts (ev) British

More information

Mr Chiasson Advanced Chemistry 12 / Chemistry 12 1 Unit B: Thermochemical Changes

Mr Chiasson Advanced Chemistry 12 / Chemistry 12 1 Unit B: Thermochemical Changes Mr Chiasson Advanced Chemistry 12 / Chemistry 12 1 Unit B: Thermochemical Changes Students will be expected to: Compare the molar enthalpies of several combustion reactions involving organic compounds.

More information

Chapter 15 Energy and Chemical Change

Chapter 15 Energy and Chemical Change Chapter 15 Energy and Chemical Change Chemical reactions usually absorb or release energy. Section 1: Energy Section 2: Heat Section 3: Thermochemical Equations Section 4: Calculating Enthalpy Change Section

More information

Gravity is a force which keeps us stuck to the earth. The Electrostatic force attracts electrons to protons in an atom.

Gravity is a force which keeps us stuck to the earth. The Electrostatic force attracts electrons to protons in an atom. Energy Relations in Chemistry: Thermochemistry The Nature of Energy Sugar you eat is "combusted" by your body to produce CO 2 and H 2 O. During this process energy is also released. This energy is used

More information

Lecture Outline. 5.1 The Nature of Energy. Kinetic Energy and Potential Energy. 1 mv

Lecture Outline. 5.1 The Nature of Energy. Kinetic Energy and Potential Energy. 1 mv Chapter 5. Thermochemistry Common Student Misconceptions Students confuse power and energy. Students confuse heat with temperature. Students fail to note that the first law of thermodynamics is the law

More information

AP* Thermodynamics Free Response Questions page 1. Essay Questions

AP* Thermodynamics Free Response Questions page 1. Essay Questions AP* Thermodynamics Free Response Questions page 1 Essay Questions 1991 The reaction represented above is a reversible reaction. BCl 3 (g) + NH 3 (g) Cl 3 BNH 3 (s) (a) Predict the sign of the entropy change,

More information

CP Chapter 17 Thermochemistry

CP Chapter 17 Thermochemistry CP Chapter 17 Thermochemistry Thermochemistry Thermochemistry is the study of energy that occur during chemical reactions and phase changes (changes of state) The Nature of Energy Energy is the ability

More information

Chapter 6. Thermochemistry. Chapter 6. Chapter 6 Thermochemistry. Chapter 6 Thermochemistry Matter vs Energy 2/16/2016

Chapter 6. Thermochemistry. Chapter 6. Chapter 6 Thermochemistry. Chapter 6 Thermochemistry Matter vs Energy 2/16/2016 Chapter 6 Thermochemistry Chapter 6 Chapter 6 Thermochemistry 6.1 Chemical Hand Warmers 6.2 The Nature of Energy: Key Definitions 6.3 The First Law of Thermodynamics: There is no Free Lunch 6.4 6.5 Measuring

More information

Thermodynamics- Chapter 19 Schedule and Notes

Thermodynamics- Chapter 19 Schedule and Notes Thermodynamics- Chapter 19 Schedule and Notes Date Topics Video cast DUE Assignment during class time One Review of thermodynamics ONE and TWO Review of thermo Wksheet Two 19.1-4; state function THREE

More information

I. Multiple Choice Questions (Type-I)

I. Multiple Choice Questions (Type-I) I. Multiple Choice Questions (Type-I) 1. Thermodynamics is not concerned about. (i) energy changes involved in a chemical reaction. the extent to which a chemical reaction proceeds. the rate at which a

More information

Chapter 5 Thermochemistry

Chapter 5 Thermochemistry Chapter 5 Thermochemistry Energy -Very much a chemistry topic Every chemical change has an accompanying change of. Combustion of fossil fuels The discharging a battery Metabolism of foods If we are to

More information

Energy, Heat and Chemical Change

Energy, Heat and Chemical Change Energy, Heat and Chemical Change Chemistry 35 Fall 2000 Thermochemistry A part of Thermodynamics dealing with energy changes associated with physical and chemical reactions Why do we care? -will a reaction

More information

June Which is a closed system? (A) burning candle (B) halogen lightbulb (C) hot water in a sink (D) ripening banana

June Which is a closed system? (A) burning candle (B) halogen lightbulb (C) hot water in a sink (D) ripening banana June 2005 28. Which is a closed system? burning candle halogen lightbulb hot water in a sink ripening banana 29. Which involves the greatest energy change? chemical reaction nuclear reaction phase change

More information

Chpt 19: Chemical. Thermodynamics. Thermodynamics

Chpt 19: Chemical. Thermodynamics. Thermodynamics CEM 152 1 Reaction Spontaneity Can we learn anything about the probability of a reaction occurring based on reaction enthaplies? in general, a large, negative reaction enthalpy is indicative of a spontaneous

More information

Homework Problem Set 6 Solutions

Homework Problem Set 6 Solutions Chemistry 360 Dr. Jean M. Standard Homework Problem Set 6 Solutions 1. Determine the amount of pressure-volume work performed by 50.0 g of liquid water freezing to ice at 0 C and 1 atm pressure. The density

More information

Thermochemistry HW. PSI Chemistry

Thermochemistry HW. PSI Chemistry Thermochemistry HW PSI Chemistry Name Energy 1) Objects can possess energy as: (a) endothermic energy (b) potential energy A) a only B) b only C) c only D) a and c E) b and c (c) kinetic energy 2) The

More information

Selected Questions on Chapter 5 Thermochemistry

Selected Questions on Chapter 5 Thermochemistry Selected Questions on Chapter 5 Thermochemistry Circle the correct answer: 1) At what velocity (m/s) must a 20.0 g object be moving in order to possess a kinetic energy of 1.00 J? A) 1.00 B) 100 10 2 C)

More information

Chemistry Chapter 16. Reaction Energy

Chemistry Chapter 16. Reaction Energy Chemistry Reaction Energy Section 16.1.I Thermochemistry Objectives Define temperature and state the units in which it is measured. Define heat and state its units. Perform specific-heat calculations.

More information

Thermochemistry-Part 1

Thermochemistry-Part 1 Brad Collins Thermochemistry-Part 1 Chapter 7 Thermochemistry Thermodynamics: The study of energy Thermochemistry: The study of energy in chemical reactions Energy: The capacity to do work Work = force

More information

CHEM J-11 June /01(a)

CHEM J-11 June /01(a) CHEM1001 2014-J-11 June 2014 22/01(a) Combustion of 15.0 g of coal provided sufficient heat to increase the temperature of 7.5 kg of water from 286 K to 298 K. Calculate the amount of heat (in kj) absorbed

More information

Chapter 6 Energy and Chemical Change. Brady and Senese 5th Edition

Chapter 6 Energy and Chemical Change. Brady and Senese 5th Edition Chapter 6 Energy and Chemical Change Brady and Senese 5th Edition Index 6.1 An object has energy if it is capable of doing work 6.2 Internal energy is the total energy of an object s molecules 6.3 Heat

More information

Chapter 8. Thermochemistry 강의개요. 8.1 Principles of Heat Flow. 2) Magnitude of Heat Flow. 1) State Properties. Basic concepts : study of heat flow

Chapter 8. Thermochemistry 강의개요. 8.1 Principles of Heat Flow. 2) Magnitude of Heat Flow. 1) State Properties. Basic concepts : study of heat flow 강의개요 Basic concepts : study of heat flow Chapter 8 Thermochemistry Calorimetry : experimental measurement of the magnitude and direction of heat flow Thermochemical Equations Copyright 2005 연세대학교이학계열일반화학및실험

More information

Most hand warmers work by using the heat released from the slow oxidation of iron: The amount your hand temperature rises depends on several factors:

Most hand warmers work by using the heat released from the slow oxidation of iron: The amount your hand temperature rises depends on several factors: Lecture Presentation Chapter 6 Thermochemistry Chemical Hand Warmers Most hand warmers work by using the heat released from the slow oxidation of iron: Exothermic reaction 4 Fe(s) + 3 O 2 (g) 2 Fe 2 O

More information

0. Graphite is thermodynamically less stable that diamond under standard conditions. 1. True 2. False

0. Graphite is thermodynamically less stable that diamond under standard conditions. 1. True 2. False 0. Graphite is thermodynamically less stable that diamond under standard conditions. 1. True 2. False 1. Which statement would be the best interpretation of the First Law of Thermodynamics? 1. The total

More information

Thermodynamic Processes and Thermochemistry

Thermodynamic Processes and Thermochemistry General Chemistry Thermodynamic Processes and Thermochemistry 박준원교수 ( 포항공과대학교화학과 ) 이번시간에는! Systems, states, and processes The first law of thermodynamics: internal energy, work, and heat Heat capacity,

More information

Ch. 17 Thermochemistry

Ch. 17 Thermochemistry Ch. 17 Thermochemistry 17.1 The Flow of Energy Energy Transformations Thermochemistry: study of energy changes in chemical reactions and changes in state Chemical potential energy: energy stored in bonds

More information

For more info visit

For more info visit Basic Terminology: Terms System Open System Closed System Isolated system Surroundings Boundary State variables State Functions Intensive properties Extensive properties Process Isothermal process Isobaric

More information

Workbook 5. Chem 1A Dr. White 1

Workbook 5. Chem 1A Dr. White 1 Chem 1A Dr. White 1 Workbook 5 5-1: Dalton s Law, KMT, Effusion/Diffusion/Real Gases 1. What is the total pressure and the partial pressure of each gas (in atm) in a mixture of 3.2 g of O 2, 1.6 g of CH

More information

Thermochemistry. Chapter 6. Copyright The McGraw-Hill Companies, Inc. Permission required for reproduction or display.

Thermochemistry. Chapter 6. Copyright The McGraw-Hill Companies, Inc. Permission required for reproduction or display. Thermochemistry Chapter 6 Copyright The McGraw-Hill Companies, Inc. Permission required for reproduction or display. Energy is the capacity to do work. Radiant energy comes from the sun and is earth s

More information

CHEM 1105 S10 March 11 & 14, 2014

CHEM 1105 S10 March 11 & 14, 2014 CHEM 1105 S10 March 11 & 14, 2014 Today s topics: Thermochemistry (Chapter 6) Basic definitions Calorimetry Enthalpy Thermochemical equations Calculating heats of reaction Hess s Law Energy and Heat Some

More information

General Chemistry 1 CHM201 Unit 3 Practice Test

General Chemistry 1 CHM201 Unit 3 Practice Test General Chemistry 1 CHM201 Unit 3 Practice Test 1. Heat is best defined as a. a substance that increases the temperature and causes water to boil. b. a form of potential energy. c. a form of work. d. the

More information

Name AP CHEM / / Collected AP Exam Essay Answers for Chapter 16

Name AP CHEM / / Collected AP Exam Essay Answers for Chapter 16 Name AP CHEM / / Collected AP Exam Essay Answers for Chapter 16 1980 - #7 (a) State the physical significance of entropy. Entropy (S) is a measure of randomness or disorder in a system. (b) From each of

More information

(03) WMP/Jun10/CHEM4

(03) WMP/Jun10/CHEM4 Thermodynamics 3 Section A Answer all questions in the spaces provided. 1 A reaction mechanism is a series of steps by which an overall reaction may proceed. The reactions occurring in these steps may

More information

Chapter 5: Thermochemistry

Chapter 5: Thermochemistry Chapter 5: Thermochemistry 1. Thermodynamics 2. Energy 3. Specific Heat 4. Enthalpy 5. Enthalpies of Reactions 6. Hess s Law 7. State Functions 8. Standard Enthalpies of Formation 9. Determining Enthalpies

More information

Page 1 of 11. Website: Mobile:

Page 1 of 11. Website:    Mobile: Class XI Chapter 6 Thermodynamics Chemistry Question 6.1: Choose the correct answer. A thermodynamic state function is a quantity (i) used to determine heat changes (ii) whose value is independent of path

More information

Energy Relationships in Chemical Reactions

Energy Relationships in Chemical Reactions Energy Relationships in Chemical Reactions What is heat? What is a state function? What is enthalpy? Is enthalpy a state function? What does this mean? How can we calculate this? How are the methods the

More information

Chapter 6 Thermochemistry

Chapter 6 Thermochemistry Chapter 6 Thermochemistry Thermochemistry Thermochemistry is a part of Thermodynamics dealing with energy changes associated with physical and chemical reactions Why do we care? - Will a reaction proceed

More information

AP Chemistry Chapter 16 Assignment. Part I Multiple Choice

AP Chemistry Chapter 16 Assignment. Part I Multiple Choice Page 1 of 7 AP Chemistry Chapter 16 Assignment Part I Multiple Choice 1984 47. CH 4 (g) + 2 O 2 (g) CO 2 (g) + 2 H 2 O(l) H = 889.1 kj H f H 2 O(l) = 285.8 kj mol 1 H f CO 2 (g) = 393.3 kj mol 1 What is

More information

Gilbert Kirss Foster. Chapter 9. Thermochemistry. Energy Changes in Chemical Reactions

Gilbert Kirss Foster. Chapter 9. Thermochemistry. Energy Changes in Chemical Reactions Gilbert Kirss Foster Chapter 9 Thermochemistry Energy Changes in Chemical Reactions Chapter Outline 9.1 Energy as a Reactant or Product 9.2 Transferring Heat and Doing Work 9.3 Enthalpy and Enthalpy Changes

More information

Chemistry Lab Fairfax High School Invitational January 7, Team Number: High School: Team Members Names:

Chemistry Lab Fairfax High School Invitational January 7, Team Number: High School: Team Members Names: Chemistry Lab Fairfax High School Invitational January 7, 2017 Team Number: High School: Team Members Names: Reference Values: Gas Constant, R = 8.314 J mol -1 K -1 Gas Constant, R = 0.08206 L atm mol

More information

ENTHALPY CHANGE CHAPTER 4

ENTHALPY CHANGE CHAPTER 4 ENTHALPY CHANGE CHAPTER 4 ENTHALPY Is the total energy of a system. E k = Kinetic energy. Vibrational Rotational Translational E due to motion H = E k + E p E P = Potential energy Attractive force b/w

More information

Enthalpy Chapter 5.3-4,7

Enthalpy Chapter 5.3-4,7 Enthalpy Chapter 5.3-4,7 heat transfer in (endothermic), +q heat transfer out (exothermic), -q SYSTEM E = q + w w transfer in (+w) w transfer out (-w) Internal Energy at Constant Volume E = E K + E P ΔE

More information

Thermochemistry is the study of the relationships between chemical reactions and energy changes involving heat.

Thermochemistry is the study of the relationships between chemical reactions and energy changes involving heat. CHEM134- F18 Dr. Al- Qaisi Chapter 06: Thermodynamics Thermochemistry is the study of the relationships between chemical reactions and energy changes involving heat. Energy is anything that has the capacity

More information

The Second Law of Thermodynamics (Chapter 4)

The Second Law of Thermodynamics (Chapter 4) The Second Law of Thermodynamics (Chapter 4) First Law: Energy of universe is constant: ΔE system = - ΔE surroundings Second Law: New variable, S, entropy. Changes in S, ΔS, tell us which processes made

More information

Chemistry: The Central Science. Chapter 5: Thermochemistry

Chemistry: The Central Science. Chapter 5: Thermochemistry Chemistry: The Central Science Chapter 5: Thermochemistry Study of energy and its transformations is called thermodynamics Portion of thermodynamics that involves the relationships between chemical and

More information

1.4 Enthalpy. What is chemical energy?

1.4 Enthalpy. What is chemical energy? 1.4 Enthalpy What is chemical energy? Chemical energy is a form of potential energy which is stored in chemical bonds. Chemical bonds are the attractive forces that bind atoms together. As a reaction takes

More information

Thermochemistry Chapter 4

Thermochemistry Chapter 4 Thermochemistry Chapter 4 Thermochemistry is the study of energy changes that occur during chemical reactions Focus is on heat and matter transfer between the system and the surroundings Energy The ability

More information

Chapter 5 Thermochemistry

Chapter 5 Thermochemistry Chapter 5 Thermochemistry Section 17.1 The Flow of Energy Heat and Work OBJECTIVES: Explain how energy, heat, and work are related. 2 Section 17.1 The Flow of Energy Heat and Work OBJECTIVES: Classify

More information

Hence. The second law describes the direction of energy transfer in spontaneous processes

Hence. The second law describes the direction of energy transfer in spontaneous processes * Heat and Work The first law of thermodynamics states that: Although energy has many forms, the total quantity of energy is constant. When energy disappears in one form, it appears simultaneously in other

More information

THE ENERGY OF THE UNIVERSE IS CONSTANT.

THE ENERGY OF THE UNIVERSE IS CONSTANT. Chapter 6 Thermochemistry.notebook Chapter 6: Thermochemistry Jan 29 1:37 PM 6.1 The Nature of Energy Thermodynamics: The study of energy and its interconversions Energy: the capacity to do work or to

More information

Thermochemistry Chapter 8

Thermochemistry Chapter 8 Thermochemistry Chapter 8 Thermochemistry First law of thermochemistry: Internal energy of an isolated system is constant; energy cannot be created or destroyed; however, energy can be converted to different

More information

Energy Ability to produce change or do work. First Law of Thermodynamics. Heat (q) Quantity of thermal energy

Energy Ability to produce change or do work. First Law of Thermodynamics. Heat (q) Quantity of thermal energy THERMOCHEMISTRY Thermodynamics Study of energy and its interconversions Energy is TRANSFORMED in a chemical reaction (POTENTIAL to KINETIC) HEAT (energy transfer) is also usually produced or absorbed -SYSTEM:

More information

MgO. progress of reaction

MgO. progress of reaction Enthalpy Changes Enthalpy is chemical energy, given the symbol H. We are interested in enthalpy changes resulting from the transfer of energy between chemical substances (the system) and the surroundings

More information

Chemistry 123: Physical and Organic Chemistry Topic 2: Thermochemistry

Chemistry 123: Physical and Organic Chemistry Topic 2: Thermochemistry Recall the equation. w = -PΔV = -(1.20 atm)(1.02 L)( = -1.24 10 2 J -101 J 1 L atm Where did the conversion factor come from? Compare two versions of the gas constant and calculate. 8.3145 J/mol K 0.082057

More information

Chapter 5: Thermochemistry. Molecular Kinetic Energy -Translational energy E k, translational = 1/2mv 2 -Rotational energy 5.

Chapter 5: Thermochemistry. Molecular Kinetic Energy -Translational energy E k, translational = 1/2mv 2 -Rotational energy 5. Chapter 5: Thermochemistry 1. Thermodynamics 2. Energy 3. Specific Heat 4. Enthalpy 5. Enthalpies of Reactions 6. Hess s Law 7. State Functions 8. Standard Enthalpies of Formation 9. Determining Enthalpies

More information

Thermochemistry: the study of energy (in the from of heat) changes that accompany physical & chemical changes

Thermochemistry: the study of energy (in the from of heat) changes that accompany physical & chemical changes Thermochemistry Thermochemistry: the study of energy (in the from of heat) changes that accompany physical & chemical changes heat flows from high to low (hot cool) endothermic reactions: absorb energy

More information

Topic 5: Energetics. Heat & Calorimetry. Thursday, March 22, 2012

Topic 5: Energetics. Heat & Calorimetry. Thursday, March 22, 2012 Topic 5: Energetics Heat & Calorimetry 1 Heat is energy that is transferred from one object to another due to a difference in temperature Temperature is a measure of the average kinetic energy of a body

More information

Thermochemistry. Chapter 6. Dec 19 8:52 AM. Thermochemistry. Energy: The capacity to do work or to produce heat

Thermochemistry. Chapter 6. Dec 19 8:52 AM. Thermochemistry. Energy: The capacity to do work or to produce heat Chapter 6 Dec 19 8:52 AM Intro vocabulary Energy: The capacity to do work or to produce heat Potential Energy: Energy due to position or composition (distance and strength of bonds) Kinetic Energy: Energy

More information

Chapter 6 Problems: 9, 19, 24, 25, 26, 27, 31-33, 37, 39, 43, 45, 47, 48, 53, 55, 57, 59, 65, 67, 73, 78-82, 85, 89, 93

Chapter 6 Problems: 9, 19, 24, 25, 26, 27, 31-33, 37, 39, 43, 45, 47, 48, 53, 55, 57, 59, 65, 67, 73, 78-82, 85, 89, 93 Chapter 6 Problems: 9, 19, 24, 25, 26, 27, 31-33, 37, 39, 43, 45, 47, 48, 53, 55, 57, 59, 65, 67, 73, 78-82, 85, 89, 93 Chapter 6 Thermochemistry The study of chemical reactions and the energy changes

More information

Section 1 - Thermochemistry

Section 1 - Thermochemistry Reaction Energy Section 1 - Thermochemistry Virtually every chemical reaction is accompanied by a change in energy. Chemical reactions usually absorb or release energy as heat. You learned in Chapter 12

More information

Energy Ability to produce change or do work. First Law of Thermodynamics. Heat (q) Quantity of thermal energy

Energy Ability to produce change or do work. First Law of Thermodynamics. Heat (q) Quantity of thermal energy THERMOCHEMISTRY Thermodynamics Study of energy and its interconversions Energy is TRANSFORMED in a chemical reaction (POTENTIAL to KINETIC) HEAT (energy transfer) is also usually produced or absorbed -SYSTEM:

More information

TERMS AND DEFINITIONS IN THERMOCHEMISTRY

TERMS AND DEFINITIONS IN THERMOCHEMISTRY (v.2.0 16/3/90 8hrs.) TERMS AND DEFINITIONS IN THERMOCHEMISTRY (v.2.1 12/4/90 2hrs.) 1) ENTHALPY CHANGE ( H) This is the same as the heat change involved in a process (provided the initial and final states

More information

In the name of Allah

In the name of Allah In the name of Allah Physical chemistry- 2 nd state semester 1 Petroleum and petrochemical engineering. Lecture No. 5,6 Thermodynamics 6-11-2016 27-11-2016 Assistance prof. Dr. Luma Majeed Ahmed lumamajeed2013@gmail.com,

More information

Thermodynamics 1. Thermodynamics means flow of heat. This deals with the quantitative relationship existing between heat and other forms of energy in physicochemical transformations. 2. The four laws are

More information

Lecture 2. Review of Basic Concepts

Lecture 2. Review of Basic Concepts Lecture 2 Review of Basic Concepts Thermochemistry Enthalpy H heat content H Changes with all physical and chemical changes H Standard enthalpy (25 C, 1 atm) (H=O for all elements in their standard forms

More information