SCALING OF HOLLOW CATHODE MAGNETRONS FOR METAL DEPOSITION a)

Size: px
Start display at page:

Download "SCALING OF HOLLOW CATHODE MAGNETRONS FOR METAL DEPOSITION a)"

Transcription

1 SCALING OF HOLLOW CATHODE MAGNETRONS FOR METAL DEPOSITION a) Gabriel Font b) Novellus Systems, Inc. San Jose, CA, USA and Mark J. Kushner Dept. of Electrical and Computer Engineering Urbana, IL, 61801, USA October 1999 a) Work supported by Novellus and SRC b) Present Address: University of Texas at San Antonio GEC99C01

2 AGENDA Introduction to Ionized Metal PVD and Hollow Cathode Magnetrons Description of Model Plasma properties of IMPVD of Cu using a HCM Comparison to Experiments Deposition and Target Erosion Concluding Remarks GEC99C15

3 COPPER INTERCONNECT WIRING The levels of interconnect wiring in microelectronics will increase to 8-9 over the next decade producing unacceptable signal propogation delays. Innovative remedies such as copper wiring are being implemented. Ref: IBM Microelectronics GECA99C12

4 IONIZED METAL PHYSICAL VAPOR DEPOSITION (IMPVD) In IMPVD, a second plasma source is used to ionize a large fraction of the the sputtered metal atoms prior to reaching the substrate. MAGNETS ANODE SHIELDS TARGET (Cathode) PLASMA ION NEUTRAL TARGET ATOMS INDUCTIVELY COUPLED COILS SECONDARY PLASMA + e + M > M+ + 2e WAFER Typical Conditions: CACEM98M mtorr Ar buffer 100s V bias on target 100s W - a few kw ICP 10s V bias on substrate SUBSTRATE BIAS UNIVERSITY OF ILLINOIS OPTICAL AND DISCHARGE PHYSICS

5 IMPVD DEPOSITION PROFILES METAL IONS In IMPVD, a large fraction of the atoms arriving at the substrate are ionized. METAL ATOMS Applying a bias to the substrate narrows the angular distribution of the metal ions. The anisotropic deposition flux enables deep vias and trenches to be uniformly filled. METAL SiO2 CACEM98M04 UNIVERSITY OF ILLINOIS OPTICAL AND DISCHARGE PHYSICS

6 HOLLOW CATHODE MAGNETRONS Hollow Cathode Magnetrons (HCM) are typically cylindrical devices with inverted metal cups and floating shields. Production tools have 300 mm substates. IRON PLATE 35 CATHODE MAGNETS Typical Operating Conditions: HEIGHT (cm) IRON RING SHIELD (FLOATING) GROUND GAS INLET SUBSTRATE (FLOATING) SHIELD (GROUND) Pressure: 5-10 mtorr B-field: G atcathode Voltage: V Substrate: Floating or biased Buffer gas: Ar, sccm Power: 2-5 kw RADIUS (cm) PUMP GEC99C02

7 HOLLOW CATHODE MAGNETRONS-IMPVD HCM - IMPVD devices use magnetic confinement in the cathode for high ion densities and sputtering, and cusp B-fields to focus the plasma. ION CONFINEMENT AND SPUTTERING PLASMA FOCUSING DIFFUSION (SOME GUIDING) B-Field Vectors B-Field Magnitude GEC99C03

8 HYBRID PLASMA EQUIPMENT MODEL Es(r,θ,z,φ) v(r,θ,z) S(r,θ,z) PLASMA CHEMISTRY MONTE CARLO SIMULATION FLUXES ETCH PROFILE = 2-D ONLY = 2-D and 3-D I,V (coils) MAGNETO- STATICS CIRCUIT E ELECTRO- MAGNETICS FDTD MICROWAVE Bs(r,θ,z) E(r,θ,z,φ), B(r,θ,z,φ) ELECTRON MONTE CARLO SIMULATION ELECTRON BEAM ELECTRON ENERGY EQN./ BOLTZMANN NON- COLLISIONAL HEATING Es(r,θ,z,φ) N(r,θ,z) S(r,θ,z), Te(r,θ,z) µ(r,θ,z) FLUID- KINETICS SIMULATION HYDRO- DYNAMICS ENERGY EQUATIONS SHEATH LONG MEAN FREE PATH (SPUTTER) SIMPLE CIRCUIT Φ(r,θ,z,φ) V(rf), V(dc) Φ(r,θ,z) R(r,θ,z) Φ(r,θ,z) R(r,θ,z) EXTERNAL CIRCUIT MESO- SCALE SURFACE CHEMISTRY J(r,θ,z,φ) I(coils), σ(r,θ,z) VPEM: SENSORS, CONTROLLER, ACTUATORS GECA99C13

9 PHYSICS MODELS USED IN HCM SIMULATIONS Monte Carlo secondary electrons emitted from cathode Fluid bulk electrons (T e from energy equation with Boltzmann derived transport coefficients) Continuity, momentum and energy for all heavy species (multi-fluid, slip and temperature jump boundary conditions) Long-mean-free path transport for sputtered atoms with sputter-heating Implicit Poisson solution simultaneous with continuity and momentum for electrons Species in Model: e, Ar, Ar(4s), Ar +, Cu( 2 S), Cu( 2 D), Cu( 2 P), Cu + GECA99C14

10 DESCRIPTION OF SPUTTERING MODEL Energy of the emitted atoms (E) obeys the cascade distribution, an approximation to Thompson s law for Ei 100 s ev: F(E) = 2 1+ E 2 b E b E ΛE i ( E b + E), E ΛE 3 i 0, E > ΛE i where Λ = 4m i m T /( m i + m T ) 2 subscripts: b ~ binding, i ~ ion, T ~ target. ion flux fast neutral flux Target Al θ Al Ar The sampling of sputtered atom energy E from the cascade distribution gives wafer E = E b ΛE i RN E b + ΛE i 1 RN ( ) where RN is a random number in interval [0,1]. PEUG99M03 UNIVERSITY OF ILLINOIS OPTICAL AND DISCHARGE PHYSICS

11 HCM- Cu IMPVD: ELECTRON DENSITY, TEMPERATURE Electron densities in excess of cm -3 are generated inside and in the throat of the cathode. Fractional ionizations are 10%. Electron temperatures peak at 4-5 ev in the cathode, and are a few ev downstream. E-Density (6.6 x cm -3 ) E-Temperature (4.8 ev) Ar, 6 mtorr, 150 sccm, 325 V, 160 G GECA99C04

12 HCM- Cu IMPVD: ELECTRON SOURCES Secondary electron emission and beam ionization produce electron sources in the cathode. Ionization in the bulk plasma, however, is the major electron source. E-beam (3 x cm -3 s -1 ) Bulk (5 x cm -3 s -1 ) Ar, 6 mtorr, 150 sccm, 325 V, 160 G GECA99C05

13 HCM- Cu DENSITIES Neutral copper [Cu( 2 S) + Cu( 2 D)] undergoes rapid ionization and rarefaction in the throat of the cathode. The majority of neutral copper is in metastable Cu( 2 D). Fractional ionization of Cu in the bulk is 10's %. Cu (1.9 x cm -3 ) GECA99C06 Cu + (1.5 x cm -3 ) Ar, 6 mtorr, 150 sccm, 325 V, 160 G

14 HCM- GAS TEMPERATURE Average Gas Temperature (max = 1530 K) Gas heating occurs dominantly by symmetric charge exchange between Ar neutrals and ions, and produces significant rarefaction. Slip between neutrals and disparate rates of charge exchange produce differences in their maximum temperatures: Ar: 1546 K Cu: 900 K Ar, 6 mtorr, 150 sccm, 325 V, 160 G GECA99C07

15 ELECTRON DENSITY AND TEMPERATURE vs EXPERIMENT 3.5 EXPERIMENT MODEL ELECTRON TEMPERATURE (ev) MODEL EXPERIMENT Electron Density RADIUS (cm) Electron Temperature Langmuir probe measurements of electron density (2.8 cm above substrate) show densities and temperatures more highly peaked on axis. The model underpredicts the "jetting" of plasma from the throat of the cathode which likely results from long-mean-free path effects not captured by the ion model. Ar, 6 mtorr, 150 sccm, 325 V, 160 G GECA99C09

16 ELECTRON DENSITY, TEMPERATURE vs BIAS HCM devices have significantly "less steep" I-V characteristics compared to conventional magnetron discharges. For example, downstream plasma densities and power deposition scale nearly linearly with bias. Electron temperatures are weak functions of bias. ELECTRON DENSITY (10 11 cm -3 ) EXPERIMENT MODEL CATHODE BIAS (v) ELECTRON TEMPERATURE (ev) EXPERIMENT MODEL CATHODE BIAS (v) GECA99C18

17 HCM- ION AND CU FLUXES TO THE SUBSTRATE 10 FLUX (10 17 cm -2 s -1 ) Ar + Cu (Direct) Cu + Cu( 2 D) Ion flux to the substrate is dominated by Ar+ Direct non-thermal Cu dominates the Cu fluxes to the substrate. The Cu flux is 25-30% ionized. 0 Cu( 2 S) Ar, 6 mtorr, 150 sccm, 325 V, 160 G GECA99C08

18 Cu DEPOSITION RATE EXPERIMENT ( x 1.33) MODEL The off-axis peak in direct sputter flux produces an offaxis peak in the deposition rate. Cu Deposition Rate (A/min) Ar, 6 mtorr, 150 sccm, 325 V, 160 G GECA99C10

19 TARGET EROSION CORNER DEPOSITION EXPERIMENT MODEL 0 EROSION L POSITION ALONG TARGET (cm) HCM TARGET B-FIELD Magnetron trapping and the resulting large ion fluxes to the target occurs at the side walls. Net deposition of sputtered Cu occurs on the end walls while the side walls experience net erosion. Ar, 6 mtorr, 150 sccm, 325 V, 160 G GECA99C11

20 CONCLUDING REMARKS Hollow Cathode Magnetrons (HCM) are capable of producing metal deposition with plasma densities of cm -3. The HCM operates somewhat as a remote plasma source with moderate electron temperatures near the substrate compared to the cathode interior. The configuration of the magnetic field is important in at least two respects: Jetting of plasma at throat of cathode Erosion profile inside the cathode Small HCMs having higher power densities experience significant rarefaction which ultimately limits their capability to produce high plasma densities and deposition rates. Large HCMs (10-20 cm diameter) which avoid these problems have been designed and built based on these scalings studies. GEC99C16

SPUTTER-WIND HEATING IN IONIZED METAL PVD+

SPUTTER-WIND HEATING IN IONIZED METAL PVD+ SPUTTER-WIND HEATING IN IONIZED METAL PVD+ Junqing Lu* and Mark Kushner** *Department of Mechanical and Industrial Engineering **Department of Electrical and Computer Engineering University of Illinois

More information

INTRODUCTION TO THE HYBRID PLASMA EQUIPMENT MODEL

INTRODUCTION TO THE HYBRID PLASMA EQUIPMENT MODEL INTRODUCTION TO THE HYBRID PLASMA EQUIPMENT MODEL Prof. Mark J. Kushner Department of Electrical and Computer Engineering 1406 W. Green St. Urbana, IL 61801 217-144-5137 mjk@uiuc.edu http://uigelz.ece.uiuc.edu

More information

OPTIMIZATION OF PLASMA UNIFORMITY USING HOLLOW-CATHODE STRUCTURE IN RF DISCHARGES*

OPTIMIZATION OF PLASMA UNIFORMITY USING HOLLOW-CATHODE STRUCTURE IN RF DISCHARGES* 51th Gaseous Electronics Conference & 4th International Conference on Reactive Plasmas Maui, Hawai i 19-23 October 1998 OPTIMIZATION OF PLASMA UNIFORMITY USING HOLLOW-CATHODE STRUCTURE IN RF DISCHARGES*

More information

MODELING OF AN ECR SOURCE FOR MATERIALS PROCESSING USING A TWO DIMENSIONAL HYBRID PLASMA EQUIPMENT MODEL. Ron L. Kinder and Mark J.

MODELING OF AN ECR SOURCE FOR MATERIALS PROCESSING USING A TWO DIMENSIONAL HYBRID PLASMA EQUIPMENT MODEL. Ron L. Kinder and Mark J. TECHCON 98 Las Vegas, Nevada September 9-11, 1998 MODELING OF AN ECR SOURCE FOR MATERIALS PROCESSING USING A TWO DIMENSIONAL HYBRID PLASMA EQUIPMENT MODEL Ron L. Kinder and Mark J. Kushner Department of

More information

SIMULATIONS OF ECR PROCESSING SYSTEMS SUSTAINED BY AZIMUTHAL MICROWAVE TE(0,n) MODES*

SIMULATIONS OF ECR PROCESSING SYSTEMS SUSTAINED BY AZIMUTHAL MICROWAVE TE(0,n) MODES* 25th IEEE International Conference on Plasma Science Raleigh, North Carolina June 1-4, 1998 SIMULATIONS OF ECR PROCESSING SYSTEMS SUSTAINED BY AZIMUTHAL MICROWAVE TE(,n) MODES* Ron L. Kinder and Mark J.

More information

EFFECT OF REACTOR GEOMETRY ON ION ENERGY DISTRIBUTIONS FOR PULSED PLASMA DOPING (P 2 LAD)*

EFFECT OF REACTOR GEOMETRY ON ION ENERGY DISTRIBUTIONS FOR PULSED PLASMA DOPING (P 2 LAD)* EFFECT OF REACTOR GEOMETRY ON ION ENERGY DISTRIBUTIONS FOR PULSED PLASMA DOPING (P 2 LAD)* Ankur Agarwal a) and Mark J. Kushner b) a) Department of Chemical and Biomolecular Engineering University of Illinois

More information

MODELING OF SEASONING OF REACTORS: EFFECTS OF ION ENERGY DISTRIBUTIONS TO CHAMBER WALLS*

MODELING OF SEASONING OF REACTORS: EFFECTS OF ION ENERGY DISTRIBUTIONS TO CHAMBER WALLS* MODELING OF SEASONING OF REACTORS: EFFECTS OF ION ENERGY DISTRIBUTIONS TO CHAMBER WALLS* Ankur Agarwal a) and Mark J. Kushner b) a) Department of Chemical and Biomolecular Engineering University of Illinois,

More information

A MONTE CARLO SIMULATION OF RADIATION TRAPPING IN ELECTRODELESS GAS DISCHARGES HAVING COMPLEX GEOMETRIES*

A MONTE CARLO SIMULATION OF RADIATION TRAPPING IN ELECTRODELESS GAS DISCHARGES HAVING COMPLEX GEOMETRIES* A MONTE CARLO SIMULATION OF RADIATION TRAPPING IN ELECTRODELESS GAS DISCHARGES HAVING COMPLEX GEOMETRIES* Kapil Rajaraman** and Mark J. Kushner*** **Department of Physics ***Department of Electrical and

More information

Investigation of the DSMC Approach for Ion/neutral Species in Modeling Low Pressure Plasma Reactor

Investigation of the DSMC Approach for Ion/neutral Species in Modeling Low Pressure Plasma Reactor Investigation of the DSMC Approach for Ion/neutral Species in Modeling Low Pressure Plasma Reactor Hao Deng, Z. Li, D. Levin, and L. Gochberg Department of Aerospace Engineering The Pennsylvania State

More information

Effect of sputter heating in ionized metal physical vapor deposition reactors

Effect of sputter heating in ionized metal physical vapor deposition reactors JOURNAL OF APPLIED PHYSICS VOLUME 87, NUMBER 10 15 MAY 2000 Effect of sputter heating in ionized metal physical vapor deposition reactors Junqing Lu a) Department of Mechanical and Industrial Engineering,

More information

INVESTIGATION of Si and SiO 2 ETCH MECHANISMS USING an INTEGRATED SURFACE KINETICS MODEL

INVESTIGATION of Si and SiO 2 ETCH MECHANISMS USING an INTEGRATED SURFACE KINETICS MODEL 46 th AVS International Symposium Oct. 25-29, 1999 Seattle, WA INVESTIGATION of Si and SiO 2 ETCH MECHANISMS USING an INTEGRATED SURFACE KINETICS MODEL Da Zhang* and Mark J. Kushner** *Department of Materials

More information

PARTICLE CONTROL AT 100 nm NODE STATUS WORKSHOP: PARTICLES IN PLASMAS

PARTICLE CONTROL AT 100 nm NODE STATUS WORKSHOP: PARTICLES IN PLASMAS PARTICLE CONTROL AT 100 nm NODE STATUS WORKSHOP: PARTICLES IN PLASMAS Mark J. Kushner University of Illinois Department of Electrical and Computer Engineering Urbana, IL 61801 mjk@uiuc.edu December 1998

More information

CONTROL OF UNIFORMITY IN CAPACITIVELY COUPLED PLASMAS CONSIDERING EDGE EFFECTS*

CONTROL OF UNIFORMITY IN CAPACITIVELY COUPLED PLASMAS CONSIDERING EDGE EFFECTS* CONTROL OF UNIFORMITY IN CAPACITIVELY COUPLED PLASMAS CONSIDERING EDGE EFFECTS* Junqing Lu and Mark J. Kushner Department of Electrical and Computer Engineering at Urbana-Champaign mjk@uiuc.edu, jqlu@uiuc.edu

More information

SCALING OF PLASMA SOURCES FOR O 2 ( 1 ) GENERATION FOR CHEMICAL OXYGEN-IODINE LASERS

SCALING OF PLASMA SOURCES FOR O 2 ( 1 ) GENERATION FOR CHEMICAL OXYGEN-IODINE LASERS SCALING OF PLASMA SOURCES FOR O 2 ( 1 ) GENERATION FOR CHEMICAL OXYGEN-IODINE LASERS D. Shane Stafford and Mark J. Kushner Department of Electrical and Computer Engineering Urbana, IL 61801 http://uigelz.ece.uiuc.edu

More information

Trench filling by ionized metal physical vapor deposition

Trench filling by ionized metal physical vapor deposition Trench filling by ionized metal physical vapor deposition Junqing Lu a) and Mark J. Kushner b) University of Illinois, 1406 W. Green Street, Urbana, Illinois 61801 Received 25 January 2001; accepted 16

More information

ETCHING Chapter 10. Mask. Photoresist

ETCHING Chapter 10. Mask. Photoresist ETCHING Chapter 10 Mask Light Deposited Substrate Photoresist Etch mask deposition Photoresist application Exposure Development Etching Resist removal Etching of thin films and sometimes the silicon substrate

More information

EFFECT OF PRESSURE AND ELECTRODE SEPARATION ON PLASMA UNIFORMITY IN DUAL FREQUENCY CAPACITIVELY COUPLED PLASMA TOOLS *

EFFECT OF PRESSURE AND ELECTRODE SEPARATION ON PLASMA UNIFORMITY IN DUAL FREQUENCY CAPACITIVELY COUPLED PLASMA TOOLS * EFFECT OF PRESSURE AND ELECTRODE SEPARATION ON PLASMA UNIFORMITY IN DUAL FREQUENCY CAPACITIVELY COUPLED PLASMA TOOLS * Yang Yang a) and Mark J. Kushner b) a) Department of Electrical and Computer Engineering

More information

CONSEQUENCES OF RADIATION TRAPPING ON ELECTRON ENERGY DISTRIBUTIONS IN LOW PRESSURE INDUCTIVELY COUPLED Hg/Ar DISCHARGES*

CONSEQUENCES OF RADIATION TRAPPING ON ELECTRON ENERGY DISTRIBUTIONS IN LOW PRESSURE INDUCTIVELY COUPLED Hg/Ar DISCHARGES* CONSEQUENCES OF RADIATION TRAPPING ON ELECTRON ENERGY DISTRIBUTIONS IN LOW PRESSURE INDUCTIVELY COUPLED Hg/Ar DISCHARGES* Kapil Rajaraman**, Alex Vasenkov*** and Mark J. Kushner*** **Department of Physics

More information

Influences on ionization fraction in an inductively coupled ionized physical vapor deposition device plasma

Influences on ionization fraction in an inductively coupled ionized physical vapor deposition device plasma JOURNAL OF APPLIED PHYSICS VOLUME 91, NUMBER 2 15 JANUARY 2002 Influences on ionization fraction in an inductively coupled ionized physical vapor deposition device plasma Daniel R. Juliano, a) David N.

More information

Effect of Gas Flow Rate and Gas Composition in Ar/CH 4 Inductively Coupled Plasmas

Effect of Gas Flow Rate and Gas Composition in Ar/CH 4 Inductively Coupled Plasmas COMSOL CONFERENCE BOSTON 2011 Effect of Gas Flow Rate and Gas Composition in Ar/CH 4 Inductively Coupled Plasmas Keisoku Engineering System Co., Ltd., JAPAN Dr. Lizhu Tong October 14, 2011 1 Contents 1.

More information

MONTE CARLO SIMULATION OF RADIATION TRAPPING IN ELECTRODELESS LAMPS: A STUDY OF COLLISIONAL BROADENERS*

MONTE CARLO SIMULATION OF RADIATION TRAPPING IN ELECTRODELESS LAMPS: A STUDY OF COLLISIONAL BROADENERS* MONTE CARLO SIMULATION OF RADIATION TRAPPING IN ELECTRODELESS LAMPS: A STUDY OF COLLISIONAL BROADENERS* Kapil Rajaraman** and Mark J. Kushner*** **Department of Physics ***Department of Electrical and

More information

MICRODISCHARGES AS SOURCES OF PHOTONS, RADICALS AND THRUST*

MICRODISCHARGES AS SOURCES OF PHOTONS, RADICALS AND THRUST* MICRODISCHARGES AS SOURCES OF PHOTONS, RADICALS AND THRUST* Ramesh Arakoni a) and Mark J. Kushner b) a) Dept. Aerospace Engineering b) Dept. Electrical and Computer Engineering Urbana, IL 61801 USA mjk@uiuc.edu

More information

ANGULAR DEPENDENCE OF ELECTRON VELOCITY DISTRIBUTIONS IN LOW-PRESSURE INDUCTIVELY COUPLED PLASMAS 1

ANGULAR DEPENDENCE OF ELECTRON VELOCITY DISTRIBUTIONS IN LOW-PRESSURE INDUCTIVELY COUPLED PLASMAS 1 ANGULAR DEPENDENCE OF ELECTRON VELOCITY DISTRIBUTIONS IN LOW-PRESSURE INDUCTIVELY COUPLED PLASMAS 1 Alex V. Vasenkov 2, and Mark J. Kushner Department of Electrical and Computer Engineering Urbana, IL

More information

Contents: 1) IEC and Helicon 2) What is HIIPER? 3) Analysis of Helicon 4) Coupling of the Helicon and the IEC 5) Conclusions 6) Acknowledgments

Contents: 1) IEC and Helicon 2) What is HIIPER? 3) Analysis of Helicon 4) Coupling of the Helicon and the IEC 5) Conclusions 6) Acknowledgments Contents: 1) IEC and Helicon 2) What is HIIPER? 3) Analysis of Helicon 4) Coupling of the Helicon and the IEC 5) Conclusions 6) Acknowledgments IEC:! IEC at UIUC modified into a space thruster.! IEC has

More information

PRINCIPLES OF PLASMA DISCHARGES AND MATERIALS PROCESSING

PRINCIPLES OF PLASMA DISCHARGES AND MATERIALS PROCESSING PRINCIPLES OF PLASMA DISCHARGES AND MATERIALS PROCESSING Second Edition MICHAEL A. LIEBERMAN ALLAN J, LICHTENBERG WILEY- INTERSCIENCE A JOHN WILEY & SONS, INC PUBLICATION CONTENTS PREFACE xrrii PREFACE

More information

The Q Machine. 60 cm 198 cm Oven. Plasma. 6 cm 30 cm. 50 cm. Axial. Probe. PUMP End Plate Magnet Coil. Filament Cathode. Radial. Hot Plate.

The Q Machine. 60 cm 198 cm Oven. Plasma. 6 cm 30 cm. 50 cm. Axial. Probe. PUMP End Plate Magnet Coil. Filament Cathode. Radial. Hot Plate. 1 The Q Machine 60 cm 198 cm Oven 50 cm Axial Probe Plasma 6 cm 30 cm PUMP End Plate Magnet Coil Radial Probe Hot Plate Filament Cathode 2 THE Q MACHINE 1. GENERAL CHARACTERISTICS OF A Q MACHINE A Q machine

More information

FRAUNHOFER IISB STRUCTURE SIMULATION

FRAUNHOFER IISB STRUCTURE SIMULATION FRAUNHOFER IISB STRUCTURE SIMULATION Eberhard Bär eberhard.baer@iisb.fraunhofer.de Page 1 FRAUNHOFER IISB STRUCTURE SIMULATION Overview SiO 2 etching in a C 2 F 6 plasma Ga ion beam sputter etching Ionized

More information

PHYSICAL VAPOR DEPOSITION OF THIN FILMS

PHYSICAL VAPOR DEPOSITION OF THIN FILMS PHYSICAL VAPOR DEPOSITION OF THIN FILMS JOHN E. MAHAN Colorado State University A Wiley-Interscience Publication JOHN WILEY & SONS, INC. New York Chichester Weinheim Brisbane Singapore Toronto CONTENTS

More information

MICROCHIP MANUFACTURING by S. Wolf

MICROCHIP MANUFACTURING by S. Wolf by S. Wolf Chapter 15 ALUMINUM THIN-FILMS and SPUTTER-DEPOSITION 2004 by LATTICE PRESS CHAPTER 15 - CONTENTS Aluminum Thin-Films Sputter-Deposition Process Steps Physics of Sputter-Deposition Magnetron-Sputtering

More information

Combinatorial RF Magnetron Sputtering for Rapid Materials Discovery: Methodology and Applications

Combinatorial RF Magnetron Sputtering for Rapid Materials Discovery: Methodology and Applications Combinatorial RF Magnetron Sputtering for Rapid Materials Discovery: Methodology and Applications Philip D. Rack,, Jason D. Fowlkes,, and Yuepeng Deng Department of Materials Science and Engineering University

More information

DEPOSITION AND COMPOSITION OF POLYMER FILMS IN FLUOROCARBON PLASMAS*

DEPOSITION AND COMPOSITION OF POLYMER FILMS IN FLUOROCARBON PLASMAS* DEPOSITION AND COMPOSITION OF POLYMER FILMS IN FLUOROCARBON PLASMAS* Kapil Rajaraman and Mark J. Kushner 1406 W. Green St. Urbana, IL 61801 rajaramn@uiuc.edu mjk@uiuc.edu http://uigelz.ece.uiuc.edu November

More information

A3D Hybrid Model of ahelicon Source +

A3D Hybrid Model of ahelicon Source + A3D Hybrid Model of ahelicon Source + Eric R. Keiter* and Mark J. Kushner** Department of Electrical and Computer Engineering 146 W. Green St., Urbana, IL 6181 USA Http://uigelz.ece.uiuc.edu 1st Gaseous

More information

PIC-MCC/Fluid Hybrid Model for Low Pressure Capacitively Coupled O 2 Plasma

PIC-MCC/Fluid Hybrid Model for Low Pressure Capacitively Coupled O 2 Plasma PIC-MCC/Fluid Hybrid Model for Low Pressure Capacitively Coupled O 2 Plasma Kallol Bera a, Shahid Rauf a and Ken Collins a a Applied Materials, Inc. 974 E. Arques Ave., M/S 81517, Sunnyvale, CA 9485, USA

More information

Repetition: Practical Aspects

Repetition: Practical Aspects Repetition: Practical Aspects Reduction of the Cathode Dark Space! E x 0 Geometric limit of the extension of a sputter plant. Lowest distance between target and substrate V Cathode (Target/Source) - +

More information

Feature-level Compensation & Control

Feature-level Compensation & Control Feature-level Compensation & Control 2 Plasma Eray Aydil, UCSB, Mike Lieberman, UCB and David Graves UCB Workshop November 19, 2003 Berkeley, CA 3 Feature Profile Evolution Simulation Eray S. Aydil University

More information

In situ electrical characterization of dielectric thin films directly exposed to plasma vacuum-ultraviolet radiation

In situ electrical characterization of dielectric thin films directly exposed to plasma vacuum-ultraviolet radiation JOURNAL OF APPLIED PHYSICS VOLUME 88, NUMBER 4 15 AUGUST 2000 In situ electrical characterization of dielectric thin films directly exposed to plasma vacuum-ultraviolet radiation C. Cismaru a) and J. L.

More information

Study of DC Cylindrical Magnetron by Langmuir Probe

Study of DC Cylindrical Magnetron by Langmuir Probe WDS'2 Proceedings of Contributed Papers, Part II, 76 8, 22. ISBN 978-737825 MATFYZPRESS Study of DC Cylindrical Magnetron by Langmuir Probe A. Kolpaková, P. Kudrna, and M. Tichý Charles University Prague,

More information

Chapter 7. Plasma Basics

Chapter 7. Plasma Basics Chapter 7 Plasma Basics 2006/4/12 1 Objectives List at least three IC processes using plasma Name three important collisions in plasma Describe mean free path Explain how plasma enhance etch and CVD processes

More information

In situ plasma diagnostics study of a commercial high-power hollow cathode magnetron deposition tool

In situ plasma diagnostics study of a commercial high-power hollow cathode magnetron deposition tool In situ plasma diagnostics study of a commercial high-power hollow cathode magnetron deposition tool Liang Meng, Ramasamy Raju, Randolph Flauta, a Hyungjoo Shin, and David N. Ruzic b Center for Plasma-Material

More information

PIC-MCC/Fluid Hybrid Model for Low Pressure Capacitively Coupled O 2 Plasma

PIC-MCC/Fluid Hybrid Model for Low Pressure Capacitively Coupled O 2 Plasma PIC-MCC/Fluid Hybrid Model for Low Pressure Capacitively Coupled O 2 Plasma Kallol Bera a, Shahid Rauf a and Ken Collins a a Applied Materials, Inc. 974 E. Arques Ave., M/S 81517, Sunnyvale, CA 9485, USA

More information

SIMULATION OF POROUS LOW-k DIELECTRIC SEALING BY COMBINED He AND NH 3 PLASMA TREATMENT *

SIMULATION OF POROUS LOW-k DIELECTRIC SEALING BY COMBINED He AND NH 3 PLASMA TREATMENT * SIMULATION OF POROUS LOW-k DIELECTRIC SEALING BY COMBINED He AND NH 3 PLASMA TREATMENT * JULINE_ICOPS09_01 Juline Shoeb a) and Mark J. Kushner b) a) Department of Electrical and Computer Engineering Iowa

More information

Keywords. 1=magnetron sputtering, 2= rotatable cathodes, 3=substrate temperature, 4=anode. Abstract

Keywords. 1=magnetron sputtering, 2= rotatable cathodes, 3=substrate temperature, 4=anode. Abstract Managing Anode Effects and Substrate Heating from Rotatable Sputter Targets. F. Papa*, V. Bellido-Gonzalez**, Alex Azzopardi**, Dr. Dermot Monaghan**, *Gencoa Technical & Business Support in US, Davis,

More information

Huashun Zhang. Ion Sources. With 187 Figures and 26 Tables Э SCIENCE PRESS. Springer

Huashun Zhang. Ion Sources. With 187 Figures and 26 Tables Э SCIENCE PRESS. Springer Huashun Zhang Ion Sources With 187 Figures and 26 Tables Э SCIENCE PRESS Springer XI Contents 1 INTRODUCTION 1 1.1 Major Applications and Requirements 1 1.2 Performances and Research Subjects 1 1.3 Historical

More information

Chapter 7 Plasma Basic

Chapter 7 Plasma Basic Chapter 7 Plasma Basic Hong Xiao, Ph. D. hxiao89@hotmail.com www2.austin.cc.tx.us/hongxiao/book.htm Hong Xiao, Ph. D. www2.austin.cc.tx.us/hongxiao/book.htm 1 Objectives List at least three IC processes

More information

The Computational Simulation of the Positive Ion Propagation to Uneven Substrates

The Computational Simulation of the Positive Ion Propagation to Uneven Substrates WDS' Proceedings of Contributed Papers, Part II, 5 9,. ISBN 978-8-778-85-9 MATFYZPRESS The Computational Simulation of the Positive Ion Propagation to Uneven Substrates V. Hrubý and R. Hrach Charles University,

More information

Profiling and modeling of dc nitrogen microplasmas

Profiling and modeling of dc nitrogen microplasmas JOURNAL OF APPLIED PHYSICS VOLUME 94, NUMBER 5 1 SEPTEMBER 2003 Profiling and modeling of dc nitrogen microplasmas Chester G. Wilson a) and Yogesh B. Gianchandani EECS Department, University of Michigan,

More information

DEPOSITION OF THIN TiO 2 FILMS BY DC MAGNETRON SPUTTERING METHOD

DEPOSITION OF THIN TiO 2 FILMS BY DC MAGNETRON SPUTTERING METHOD Chapter 4 DEPOSITION OF THIN TiO 2 FILMS BY DC MAGNETRON SPUTTERING METHOD 4.1 INTRODUCTION Sputter deposition process is another old technique being used in modern semiconductor industries. Sputtering

More information

Energy fluxes in plasmas for fabrication of nanostructured materials

Energy fluxes in plasmas for fabrication of nanostructured materials Energy fluxes in plasmas for fabrication of nanostructured materials IEAP, Universität Kiel 2nd Graduate Summer Institute "Complex Plasmas" August 5-13, 2010 in Greifswald (Germany) AG 1 Outline Motivation

More information

Consequences of asymmetric pumping in low pressure plasma processing reactors: A three-dimensional modeling study

Consequences of asymmetric pumping in low pressure plasma processing reactors: A three-dimensional modeling study Consequences of asymmetric pumping in low pressure plasma processing reactors: A three-dimensional modeling study Mark J. Kushner a) University of Illinois, Department of Electrical and Computer Engineering,

More information

A novel sputtering technique: Inductively Coupled Impulse Sputtering (ICIS)

A novel sputtering technique: Inductively Coupled Impulse Sputtering (ICIS) IOP Conference Series: Materials Science and Engineering A novel sputtering technique: Inductively Coupled Impulse Sputtering (ICIS) To cite this article: D A L Loch and A P Ehiasarian 2012 IOP Conf. Ser.:

More information

Etching Issues - Anisotropy. Dry Etching. Dry Etching Overview. Etching Issues - Selectivity

Etching Issues - Anisotropy. Dry Etching. Dry Etching Overview. Etching Issues - Selectivity Etching Issues - Anisotropy Dry Etching Dr. Bruce K. Gale Fundamentals of Micromachining BIOEN 6421 EL EN 5221 and 6221 ME EN 5960 and 6960 Isotropic etchants etch at the same rate in every direction mask

More information

6.5 Optical-Coating-Deposition Technologies

6.5 Optical-Coating-Deposition Technologies 92 Chapter 6 6.5 Optical-Coating-Deposition Technologies The coating process takes place in an evaporation chamber with a fully controlled system for the specified requirements. Typical systems are depicted

More information

Simulation of Metal TRAnport. SIMTRA : a tool to predict and understand deposition. K. Van Aeken, S. Mahieu, D. Depla.

Simulation of Metal TRAnport. SIMTRA : a tool to predict and understand deposition. K. Van Aeken, S. Mahieu, D. Depla. Simulation of Metal TRAnport SIMTRA : a tool to predict and understand deposition K. Van Aeken, S. Mahieu, D. Depla www.draft.ugent.be 1) : Why do we calculate? ) Scientific background : How do we calculate?

More information

Multi-fluid Simulation Models for Inductively Coupled Plasma Sources

Multi-fluid Simulation Models for Inductively Coupled Plasma Sources Multi-fluid Simulation Models for Inductively Coupled Plasma Sources Madhusudhan Kundrapu, Seth A. Veitzer, Peter H. Stoltz, Kristian R.C. Beckwith Tech-X Corporation, Boulder, CO, USA and Jonathan Smith

More information

Langmuir Probes as a Diagnostic to Study Plasma Parameter Dependancies, and Ion Acoustic Wave Propogation

Langmuir Probes as a Diagnostic to Study Plasma Parameter Dependancies, and Ion Acoustic Wave Propogation Langmuir Probes as a Diagnostic to Study Plasma Parameter Dependancies, and Ion Acoustic Wave Propogation Kent Lee, Dean Henze, Patrick Smith, and Janet Chao University of San Diego (Dated: May 1, 2013)

More information

Effect of small amounts of hydrogen added to argon glow discharges: Hybrid Monte Carlo fluid model

Effect of small amounts of hydrogen added to argon glow discharges: Hybrid Monte Carlo fluid model PHYSICAL REVIEW E, VOLUME 65, 056402 Effect of small amounts of hydrogen added to argon glow discharges: Hybrid Monte Carlo fluid model Annemie Bogaerts* and Renaat Gijbels Department of Chemistry, University

More information

Plasma Processing in the Microelectronics Industry. Bert Ellingboe Plasma Research Laboratory

Plasma Processing in the Microelectronics Industry. Bert Ellingboe Plasma Research Laboratory Plasma Processing in the Microelectronics Industry Bert Ellingboe Plasma Research Laboratory Outline What has changed in the last 12 years? What is the relavant plasma physics? Sheath formation Sheath

More information

Plasma Modeling with COMSOL Multiphysics

Plasma Modeling with COMSOL Multiphysics Plasma Modeling with COMSOL Multiphysics Copyright 2014 COMSOL. Any of the images, text, and equations here may be copied and modified for your own internal use. All trademarks are the property of their

More information

Physique des plasmas radiofréquence Pascal Chabert

Physique des plasmas radiofréquence Pascal Chabert Physique des plasmas radiofréquence Pascal Chabert LPP, Ecole Polytechnique pascal.chabert@lpp.polytechnique.fr Planning trois cours : Lundi 30 Janvier: Rappels de physique des plasmas froids Lundi 6 Février:

More information

A comparison of emissive probe techniques for electric potential measurements in a Hall thruster plasma

A comparison of emissive probe techniques for electric potential measurements in a Hall thruster plasma A comparison of emissive probe techniques for electric potential measurements in a Hall thruster plasma J. P. Sheehan*, Y. Raitses**, N. Hershkowitz*, I. Kaganovich**, and N. J. Fisch** *University of

More information

Diffusion during Plasma Formation

Diffusion during Plasma Formation Chapter 6 Diffusion during Plasma Formation Interesting processes occur in the plasma formation stage of the Basil discharge. This early stage has particular interest because the highest plasma densities

More information

DOE WEB SEMINAR,

DOE WEB SEMINAR, DOE WEB SEMINAR, 2013.03.29 Electron energy distribution function of the plasma in the presence of both capacitive field and inductive field : from electron heating to plasma processing control 1 mm PR

More information

65 th GEC, October 22-26, 2012

65 th GEC, October 22-26, 2012 65 th GEC, October 22-26, 2012 2D Fluid/Analytical Simulation of Multi-Frequency Capacitively-Coupled Plasma Reactors (CCPs) E. Kawamura, M.A. Lieberman, D.B. Graves and A.J. Lichtenberg A fast 2D hybrid

More information

KINETIC DESCRIPTION OF MAGNETIZED TECHNOLOGICAL PLASMAS

KINETIC DESCRIPTION OF MAGNETIZED TECHNOLOGICAL PLASMAS KINETIC DESCRIPTION OF MAGNETIZED TECHNOLOGICAL PLASMAS Ralf Peter Brinkmann, Dennis Krüger Fakultät für Elektrotechnik und Informationstechnik Lehrstuhl für Theoretische Elektrotechnik Magnetized low

More information

Computational Modeling of a High Power Plasma Source for Material Interaction Experiments

Computational Modeling of a High Power Plasma Source for Material Interaction Experiments Computational Modeling of a High Power Plasma Source for Material Interaction Experiments IEPC-2013-224 Presented at the 33rd International Electric Propulsion Conference, The George Washington University

More information

Computations on Gabor lens having two different field distributions

Computations on Gabor lens having two different field distributions IOSR Journal of Applied Physics (IOSR-JAP) e-issn: 2278-4861.Volume 6, Issue 6 Ver. II (Nov.-Dec. 2014), PP 06-11 Computations on Gabor lens having two different field distributions Saif KamilShnain Department

More information

Plasma atomic layer etching using conventional plasma equipment

Plasma atomic layer etching using conventional plasma equipment Plasma atomic layer etching using conventional plasma equipment Ankur Agarwal a Department of Chemical and Biomolecular Engineering, University of Illinois, 600 S. Mathews Ave., Urbana, Illinois 61801

More information

Application of Rarefied Flow & Plasma Simulation Software

Application of Rarefied Flow & Plasma Simulation Software 2016/5/18 Application of Rarefied Flow & Plasma Simulation Software Yokohama City in Japan Profile of Wave Front Co., Ltd. Name : Wave Front Co., Ltd. Incorporation : March 1990 Head Office : Yokohama

More information

CHARACTERIZATION OF A DC PLASMA WITH HOLLOW CATHODE EFFECT

CHARACTERIZATION OF A DC PLASMA WITH HOLLOW CATHODE EFFECT Romanian Reports in Phisics, Vol. 56, No., P. 71-76, 004 CHARACTERIZATION OF A DC PLASMA WITH HOLLOW CATHODE EFFECT A. R. PETRE 1, M. BÃZÃVAN 1, V. COVLEA 1, V.V. COVLEA 1, ISABELLA IOANA OPREA, H. ANDREI

More information

Operation Characteristics of Diverging Magnetic Field Electrostatic Thruster

Operation Characteristics of Diverging Magnetic Field Electrostatic Thruster Operation Characteristics of Diverging Magnetic Field Electrostatic Thruster IEPC-07-9 Presented at the 5th International Electric Propulsion Conference Georgia Institute of Technology Atlanta, Georgia

More information

E SC 412 Nanotechnology: Materials, Infrastructure, and Safety Wook Jun Nam

E SC 412 Nanotechnology: Materials, Infrastructure, and Safety Wook Jun Nam E SC 412 Nanotechnology: Materials, Infrastructure, and Safety Wook Jun Nam Lecture 10 Outline 1. Wet Etching/Vapor Phase Etching 2. Dry Etching DC/RF Plasma Plasma Reactors Materials/Gases Etching Parameters

More information

Plasma Chemistry Study in an Inductively Coupled Dielectric Etcher

Plasma Chemistry Study in an Inductively Coupled Dielectric Etcher Plasma Chemistry Study in an Inductively Coupled Dielectric Etcher Chunshi Cui, John Trow, Ken Collins, Betty Tang, Luke Zhang, Steve Shannon, and Yan Ye Applied Materials, Inc. October 26, 2000 10/28/2008

More information

Ionized physical vapor deposition (IPVD): A review of technology and applications

Ionized physical vapor deposition (IPVD): A review of technology and applications Ionized physical vapor deposition (IPVD): A review of technology and applications Ulf Helmersson, Martina Lattemann, Johan Böhlmark, Arutiun P. Ehiasarian and Jon Tomas Gudmundsson The self-archived postprint

More information

arxiv: v1 [physics.plasm-ph] 10 Nov 2014

arxiv: v1 [physics.plasm-ph] 10 Nov 2014 arxiv:1411.2464v1 [physics.plasm-ph] 10 Nov 2014 Effects of fast atoms and energy-dependent secondary electron emission yields in PIC/MCC simulations of capacitively coupled plasmas A. Derzsi 1, I. Korolov

More information

2D Hybrid Fluid-Analytical Model of Inductive/Capacitive Plasma Discharges

2D Hybrid Fluid-Analytical Model of Inductive/Capacitive Plasma Discharges 63 rd GEC & 7 th ICRP, 2010 2D Hybrid Fluid-Analytical Model of Inductive/Capacitive Plasma Discharges E. Kawamura, M.A. Lieberman, and D.B. Graves University of California, Berkeley, CA 94720 This work

More information

Electron cyclotron resonance plasma enhanced direct current sputtering discharge with magnetic-mirror plasma confinement

Electron cyclotron resonance plasma enhanced direct current sputtering discharge with magnetic-mirror plasma confinement Electron cyclotron resonance plasma enhanced direct current sputtering discharge with magnetic-mirror plasma confinement M. Mišina, a) Y. Setsuhara, and S. Miyake Joining and Welding Research Institute,

More information

Low-field helicon discharges

Low-field helicon discharges Plasma Phys. Control. Fusion 39 (1997) A411 A420. Printed in the UK PII: S0741-3335(97)80958-X Low-field helicon discharges F F Chen, X Jiang, J D Evans, G Tynan and D Arnush University of California,

More information

Plasma Modeling I: Modeling of plasmas. Annemie Bogaerts

Plasma Modeling I: Modeling of plasmas. Annemie Bogaerts Plasma Modeling I: Modeling of plasmas Annemie Bogaerts Department of Chemistry, University of Antwerp (UA), Research group PLASMANT Belgium Annemie.Bogaerts@uantwerpen.be www.uantwerpen.be/plasmant 2

More information

Hong Young Chang Department of Physics, Korea Advanced Institute of Science and Technology (KAIST), Republic of Korea

Hong Young Chang Department of Physics, Korea Advanced Institute of Science and Technology (KAIST), Republic of Korea Hong Young Chang Department of Physics, Korea Advanced Institute of Science and Technology (KAIST), Republic of Korea Index 1. Introduction 2. Some plasma sources 3. Related issues 4. Summary -2 Why is

More information

Enhancement of an IEC Device with a Helicon Ion Source for Helium-3 Fusion

Enhancement of an IEC Device with a Helicon Ion Source for Helium-3 Fusion Enhancement of an IEC Device with a Helicon Ion Source for Helium-3 Fusion Gabriel E. Becerra*, Gerald L. Kulcinski and John F. Santarius Fusion Technology Institute University of Wisconsin Madison *E-mail:

More information

Electromagnetics in COMSOL Multiphysics is extended by add-on Modules

Electromagnetics in COMSOL Multiphysics is extended by add-on Modules AC/DC Module Electromagnetics in COMSOL Multiphysics is extended by add-on Modules 1) Start Here 2) Add Modules based upon your needs 3) Additional Modules extend the physics you can address 4) Interface

More information

Lecture 6 Plasmas. Chapters 10 &16 Wolf and Tauber. ECE611 / CHE611 Electronic Materials Processing Fall John Labram 1/68

Lecture 6 Plasmas. Chapters 10 &16 Wolf and Tauber. ECE611 / CHE611 Electronic Materials Processing Fall John Labram 1/68 Lecture 6 Plasmas Chapters 10 &16 Wolf and Tauber 1/68 Announcements Homework: Homework will be returned to you on Thursday (12 th October). Solutions will be also posted online on Thursday (12 th October)

More information

Robert A. Meger Richard F. Fernster Martin Lampe W. M. Manheimer NOTICE

Robert A. Meger Richard F. Fernster Martin Lampe W. M. Manheimer NOTICE Serial Number Filing Date Inventor 917.963 27 August 1997 Robert A. Meger Richard F. Fernster Martin Lampe W. M. Manheimer NOTICE The above identified patent application is available for licensing. Requests

More information

Introduction to Thin Film Processing

Introduction to Thin Film Processing Introduction to Thin Film Processing Deposition Methods Many diverse techniques available Typically based on three different methods for providing a flux of atomic or molecular material Evaporation Sputtering

More information

Plasma diagnostics of pulsed sputtering discharge

Plasma diagnostics of pulsed sputtering discharge Plasma diagnostics of pulsed sputtering discharge Vitezslav Stranak Zdenek Hubicka, Martin Cada and Rainer Hippler University of Greifswald, Institute of Physics, Felix-Hausdorff-Str. 6, 174 89 Greifswald,

More information

Adjustment of electron temperature in ECR microwave plasma

Adjustment of electron temperature in ECR microwave plasma Vacuum (3) 53 Adjustment of electron temperature in ECR microwave plasma Ru-Juan Zhan a, Xiaohui Wen a,b, *, Xiaodong Zhu a,b, Aidi zhao a,b a Structure Research Laboratory, University of Science and Technology

More information

Simulation of a two-dimensional sheath over a flat insulator conductor interface on a radio-frequency biased electrode in a high-density plasma

Simulation of a two-dimensional sheath over a flat insulator conductor interface on a radio-frequency biased electrode in a high-density plasma JOURNAL OF APPLIED PHYSICS VOLUME 95, NUMBER 7 1 APRIL 2004 Simulation of a two-dimensional sheath over a flat insulator conductor interface on a radio-frequency biased electrode in a high-density plasma

More information

Effect of Noble Gas. Plasma Processing Laboratory University of Houston. Acknowledgements: DoE Plasma Science Center and NSF

Effect of Noble Gas. Plasma Processing Laboratory University of Houston. Acknowledgements: DoE Plasma Science Center and NSF Ion Energy Distributions in Pulsed Plasmas with Synchronous DC Bias: Effect of Noble Gas W. Zhu, H. Shin, V. M. Donnelly and D. J. Economou Plasma Processing Laboratory University of Houston Acknowledgements:

More information

Substrate Thermal Heating Rates as a Function of Magnetically Controlled Plasma Impedance on Rotary Cathodes

Substrate Thermal Heating Rates as a Function of Magnetically Controlled Plasma Impedance on Rotary Cathodes Substrate Thermal Heating Rates as a Function of Magnetically Controlled Plasma Impedance on Rotary Cathodes Patrick Morse, Russ Lovro, Timmy Strait, Mike Rost Sputtering Components Inc. Owatonna Minnesota

More information

Determination of flux ionization fraction using a quartz crystal microbalance and a gridded energy analyzer in an ionized magnetron sputtering system

Determination of flux ionization fraction using a quartz crystal microbalance and a gridded energy analyzer in an ionized magnetron sputtering system Determination of flux ionization fraction using a quartz crystal microbalance and a gridded energy analyzer in an ionized magnetron sputtering system K. M. Green, D. B. Hayden, D. R. Juliano, and D. N.

More information

Measurement of EEDF and Distribution of Primary Electron in a Bucket Ion Source

Measurement of EEDF and Distribution of Primary Electron in a Bucket Ion Source Fourth IAEA Technical Meeting on "Negative Ion Based NBIs" May 9-11 2005, Padova - Italy Measurement of EEDF and Distribution of Primary Electron in a Bucket Ion Source S. Miyamoto, F. Kanayama, T. Minami,

More information

TMT4320 Nanomaterials November 10 th, Thin films by physical/chemical methods (From chapter 24 and 25)

TMT4320 Nanomaterials November 10 th, Thin films by physical/chemical methods (From chapter 24 and 25) 1 TMT4320 Nanomaterials November 10 th, 2015 Thin films by physical/chemical methods (From chapter 24 and 25) 2 Thin films by physical/chemical methods Vapor-phase growth (compared to liquid-phase growth)

More information

CHAPTER 6: Etching. Chapter 6 1

CHAPTER 6: Etching. Chapter 6 1 Chapter 6 1 CHAPTER 6: Etching Different etching processes are selected depending upon the particular material to be removed. As shown in Figure 6.1, wet chemical processes result in isotropic etching

More information

I. INTRODUCTION J. Vac. Sci. Technol. A 16 4, Jul/Aug /98/16 4 /2454/9/$ American Vacuum Society 2454

I. INTRODUCTION J. Vac. Sci. Technol. A 16 4, Jul/Aug /98/16 4 /2454/9/$ American Vacuum Society 2454 Consequences of three-dimensional physical and electromagnetic structures on dust particle trapping in high plasma density material processing discharges Helen H. Hwang, a) Eric R. Keiter, b) and Mark

More information

Sheaths: More complicated than you think a

Sheaths: More complicated than you think a PHYSICS OF PLASMAS 12, 055502 2005 Sheaths: More complicated than you think a Noah Hershkowitz b University of Wisconsin-Madison, Madison, Wisconsin 53706 Received 7 December 2004; accepted 7 February

More information

Physics and Modelling of a Negative Ion Source Prototype for the ITER Neutral Beam Injection

Physics and Modelling of a Negative Ion Source Prototype for the ITER Neutral Beam Injection 1 ITR/P1-37 Physics and Modelling of a Negative Ion Source Prototype for the ITER Neutral Beam Injection J.P. Boeuf a, G. Fubiani a, G. Hagelaar a, N. Kohen a, L. Pitchford a, P. Sarrailh a, and A. Simonin

More information

Characteristics of Neutral Beam Generated by a Low Angle Reflection and Its Etch Characteristics by Halogen-Based Gases

Characteristics of Neutral Beam Generated by a Low Angle Reflection and Its Etch Characteristics by Halogen-Based Gases Characteristics of Neutral Beam Generated by a Low Angle Reflection and Its Etch Characteristics by Halogen-Based Gases Geun-Young Yeom SungKyunKwan University Problems of Current Etch Technology Scaling

More information

Spatially resolved mass spectrometric sampling of inductively coupled plasmas using a movable sampling orifice

Spatially resolved mass spectrometric sampling of inductively coupled plasmas using a movable sampling orifice Spatially resolved mass spectrometric sampling of inductively coupled plasmas using a movable sampling orifice Xi Li a),b) and Gottlieb S. Oehrlein a),c) Materials Science and Engineering and Institute

More information

Plasma Technology September 15, 2005 A UC Discovery Project

Plasma Technology September 15, 2005 A UC Discovery Project 1 Feature-level Compensation & Control Plasma Technology September 15, 2005 A UC Discovery Project 9/15/05 - Plasma Technology 2 Plasma Technology Professors Jane P. Chang (UCLA), Michael A. Lieberman,

More information

Optical Atomic Spectroscopy

Optical Atomic Spectroscopy Optical Atomic Spectroscopy Methods to measure conentrations of primarily metallic elements at < ppm levels with high selectivity! Two main optical methodologies- -Atomic Absorption--need ground state

More information