Bonding in Solids. Section 4 (M&T Chapter 7) Structure and Energetics of Metallic and Ionic Solids. Close-Packing
|
|
- Raymond Hancock
- 6 years ago
- Views:
Transcription
1 Section 4 (M&T Chapter 7) Structure and Energetics of Metallic and Ionic Solids Bonding in Solids We have discussed bonding in molecules with three models: Lewis Valence Bond MO Theory These models not suitable for describing bonding in solids (metals, ionic compounds) The structures of many solids (e.g. NaCl (s), Fe (s) ) are best described by a lattice model, in which atoms (ions) of the lattice are placed in highly ordered arrangements (crystal lattices) Arrangement yields maximum net attractive force with other ions/atoms in the lattice and minimum repulsive forces Close-Packing Treat the atoms of a metal (or ions of an ionic substance) as spheres (e.g. marbles). Fill a tray until its surface is covered with a layer of marbles, get a picture that looks something like this: In this model, all spheres are touching the surface of six other spheres (except those on the edges/corners) a hexagonal arrangement This arrangement is one layer of what is called a closepacked arrangement See that there are also six spaces around each sphere If we were to pile another layer on top of this, it would appear as follows Close-Packing Close-Packing When the next close-packed level is added, only three of the spaces surrounding each sphere can be occupied Around each sphere, there are a total of six spaces Put next layer of spheres into three of them A C A C A C So far, the levels are different (the spheres are not located in the same space directly above the first level), so we have an AB-type arrangement for the two layers Note the spaces (hollows) that are now present two types: A located above a sphere C located above a space 1
2 Close-Packing If we were to add another close-packed level on top, we could do so in two ways: C C A A C Put 3 rd layer into A hollows Put 3 rd layer into C hollows Close-Packing In the upper figure (ABA-type) the top level was created by putting spheres into the spaces labeled A of the second layer The top level here is thus the same as the first (bottom) level (the spheres in this level are located directly above those of the first level) an ABAB arrangement ABA arrangement Close-Packing In the lower figure (ABC-type), the top layer was constructed by placing spheres in the spaces labeled C of the second layer This results in a level that is different than either of the first two levels (an ABC arrangement) Close-Packed Arrangements These two arrangements shown below, are represented as ball-and-stick arrangements, and not meant to imply that spheres are not touching Which is which? The coordination number (CN) in each of these lattices is 1. ABC arrangement Top layer different than bottom Close-Packed Arrangements The unit cells are called: a) hexagonal close-packed (hcp) describing an ABABAB arrangement b) cubic close-packed (ccp) this describes an ABCABC ordering Close-Packed Arrangements The unit cells are shown below as spherical models Cubic close-packed (ccp) (face-centered cubic) Hexagonal close-packed (hcp) hcp ccp (this is also known as a facecentered cubic arrangement)
3 Interstitial Holes The spaces between spheres in the close-packing arrangements are called interstitial holes or interstitial spaces Two types: Tetrahedral (four point cavities) Octahedral (six point cavities - larger) Crystal Structures Crystalline: long-range order Amorphous: no long-range pattern Unit Cell Holes in Crystals Unit Cells in the Cubic Crystal System Non-Close Packed Arrangements Number of Atoms in a Unit Cell In many solids, the percentage of occupied space is less than 74% - these solids assume non-close packed arrangements Arrangements below depict the simplest model that incorporates all the information of the lattice (a unit cell) 5% of space used 68% of space used What are the coordination numbers in these lattices? Face centered unit cell contains 8 1/8 atom + 6 ½ atom = 4 atoms Simple cubic Body-centered cubic 3
4 Counting Cell Occupancy atoms 4 atoms 1 atom X-Ray Diffraction : Crystallography circle = bcc diamond = hcp + = ccp (fcc) Data quoted for T = 98 K Diffraction of X-Rays Polymorphism The lattice structure adopted by an element may change as the temperature and/or the pressure is changed A substance that can exist in more than one crystalline form is said to be polymorphic Next slide a phase diagram for Fe Constructive interference of the x-rays only when the pathlength in the crystal is a whole multiple of the wavelength Bragg Equation: nλ = d sin θ, n = 1,, 3, Phase diagram lines (phase boundaries) separate different phases of a substance On a line, have both phases present in equilibrium 4
5 Phase Diagram for Iron Phase Diagram for Iron Look at Fe at 1000 K, 1 atm (α-fe). Increase the pressure. What happens? (γ-fe) Non close-packed Fe at 00K, 1 atm increase pressure to 100 atm. What happens? At ambient temperature (~ 300 K) and pressure (1 atm), iron adopts a body-centered cubic (bcc) ordering (α-fe) Phase Diagram for Iron Alloys and Intermetallic Compounds Sometimes, we can heat an element, changing its packing, and rapidly cool it to retain the higher temperature structure (quenching) this allows higher temperature structures to be studied at ambient temperatures Alloys are intimate mixtures (solid solutions) of metals/elements, or a distinct compound consisting of these elements, with physical properties that differ from those of the elements that make it up The aim of alloying is to endow the mixture with desirable properties that are inherent to the metals of the mixture (e.g. hardness, ductility) Alloys and Intermetallic Compounds Everyday examples of alloys: (solute(s), solvent) Solder (Sn, Pb); low melting point Stainless steel (Cr, C, Fe); anti-corrosion, strength Sterling silver (Cu, Ag); doesn t tarnish Alloys Substitutional alloys: created from metals having similar r Met (radii), similar coordination number Metals are mixed in the molten state (high temperature) and allowed to cool gradually The solute atoms occupy sites in the lattice that would normally be occupied by solvent atoms Sterling silver is created from 9.5% Ag, 7.5% Cu both adopt ccp lattices r Met(Ag) = 140 pm r Met(Cu) = 14 pm r Met = metallic radius: half the distance between nearest neighbor atoms in a solid-state metallic lattice 5
6 Substitutional Alloys Alloys Interstitial alloys: solute atoms occupy the interstitial spaces (cavities) of a host lattice (e.g. carbon steel) Low C steel: % C (steel sheeting) Medium C steel: % (bolts, screws, etc.) High C steel: % (cutting, drilling tools) Intermetallic Compounds Some melts (combinations of metals in the molten state) will solidify in arrays that are different than either of the components that make up the mixture these compounds are called intermetallic compounds Brass (Cu, Zn) is an intermetallic compound - γ-brass has a formula of Cu 5 Zn 8 Alloys and Intermetallic Compounds Alloys are intimate mixtures (solid solutions) of metals/elements, or a distinct compound consisting of these elements, with physical properties that differ from those of the elements that make it up The aim of alloying is to endow the mixture with desirable properties that are inherent to the metals of the mixture (e.g. hardness, ductility) In diamond, C-atoms take on a fcc-type arrangement Each C-atom is fourcoordinate (tetrahedral) and so possesses a complete octet of electrons through covalent bonds Also adopted by Si, Ge, Sn and Pb (other C-group elements) Diamond Graphite The most thermodynamically stable form of carbon (diamond is metastable), graphite consists of layers of carbon sheets that are built from fused, 6-membered carbon rings The bonding that exists within a layer is covalent (and delocalized), but between planes, dispersion forces (non-covalent) hold the rings together (weak intermolecular force) 6
7 Unit Cells The smallest collection of spheres that describes a lattice (when it is repeated) is the unit cell Some of the atoms in a unit cell are shared with other cells, and so they do not belong entirely to one cell Corner site Example, the atoms at the corners of the cell shown on the right are shared with seven other cells Each contributes 1/8 of an atom to the cell shown, and is called a corner site Face-centered site A face-centered cubic unit cell Unit Cell Contributions Corner sites each contribute 1/8 of a sphere to a cell Edge sites contribute ¼ sphere to the cell Face sites contribute ½ sphere to the cell Sites contained in the cell (e.g. the center site of a bcc cell) contribute 1 each How many spheres (atoms/ions) occupy - a simple cubic unit cell? - a body-centered cubic cell? - a face-centered cubic cell? Face-centered site Ionic Solids Holes in Crystals Particles: Cations (+) small size Anions (-) large size UNIT CELL dimensions usually determined by the arrangement of the large ANIONS. Cations fit into the holes within the anion structure (R) +(R) = (R+r) r = 0.414R Radius Ratios A rough guide for predicting structures of salts (cations and anions). Use r cation / r anion, or r + /r - ) Sodium Chloride Value of r + /r - Predicted Coordination Number of Cation Predicted Coordination Geometry of Cation <0.15 Linear Trigonal Planar Tetrahedral Octahedral > Cubic r Na+ /R Cl- = 10 pm/ 181 pm = 0.56, expect Na + to occupy octahedral holes. 7
8 Holes in Crystals Four types of holes: trigonal < tetrahedral < octahedral < cubic too small for any cation Final arrangement depends on relative sizes of cations and anions plus the required stoichiometry This is an example of a binary solid (two elements involved) what is its formula? Dimensions of Cubic Lattices For cubic unit cells, it is possible to determine cell lengths (edge) and dimensions of lattice spaces For example, a simple cubic cell will have an edge length of r, where r is the radius of a sphere It can be shown that the corner-to-corner length indicated in the picture will be 3 a In this diagram, let a = r Each sphere has a radius of r Each edge length (length of the edge of the unit cell) is then r (spheres in contact) Can also be shown that - a sphere of radius up to 0.73r can fit in the center -the atoms occupy 5% of the available space of the unit cell 3 a Simple cubic unit cell a a Binary Lattices Rock Salt Lattice (NaCl) Interpenetrating fcc lattices of Na + ions and Cl - ions (rem: fcc = ccp) Cl - ions are much larger then the Na + ions (Cl - : 181 pm; Na + : 10 pm). Na + ions are occupying octahedral holes in the unit cell shown Each Na +, Cl - ion is octahedral (six coordinate) NaCl-type lattice structures exist for many ionic compounds (NaF, NaBr, NaI, NaH, LiX, KX, RbX (X = halide), AgF, AgCl, AgBr, MgO, CaO, SrO, BaO, MnO, CoO, NiO, MgS, CaS, SrS, BaS) CsCl Lattice Eight coordinate ions (cations and anions) body centered cubic Interpenetrating simple cubic-type lattice Adopted by CsBr, CsI, TlCl, TlBr CaF (Fluorite) Lattice Eight-coordinate cations (Ca +, grey spheres) Four-coordinate anions (F -, blue spheres) Six cations are face-positioned, shared between adjacent cells. This lattice type adopted for group II metal fluorides, BaCl, and f-block metal dioxides Exchanging the cations and anions in this structure would yield an antifluorite lattice M X stoichiometry. Adopted by some group I metal oxides and sulfides (e.g. Na S). 8
9 Zinc blende, ZnS (diamond type) lattice Similar to the fluorite lattice, with removal of half of the anions (so MX to MX stoichiometry). Looks something like the structure shown for diamond each atom is in a tetrahedral environment How many Zn, S atoms exist in this structure? Wurtzite (ZnS) lattice Wurtzite formed by high temperature transition from zinc blende Hexagonal prism unit cell with all ions tetrahedrally sited How many Zn +, S - ions exist in this structure? Zn: grey S: blue β-cristobalite (SiO ) lattice Again, much like diamond structure, but with oxygen ions between the tetrahedral Si ions. Si-O-Si bond angle in figure is 180 o, while in practice, it is found to be 147 o (bonding in SiO is not purely electrostatic). Rutile (TiO ) structure Oxygen ions (white) are trigonal planar while titanium centers (black) are octahedral. Four oxygen ions are faceoriented, while two are contained in the cell In a pure ionic model, electrostatic attraction would be the only factor that would be expected to hold an ionic lattice together Perovskite (CaTiO 3 ) lattice A double oxide (oxygen atoms are coordinated to both Ca + and Ti 4+ ) Ca + ion is at center of cube unit cell Ti 4+ ions at corners of the cube (eight of these) O - ions at each edge of the cube (twelve of these) CdCl, CdI Lattices Common for MX structures to crystallize in this structure Can observe the layers as ABAB (layered lattices) I - ions (gold) are arranged in a hcp format with the Cd + ions (white) occupying octahedral holes. In CdCl, the arrangement is ccp Attractive forces that exist between these planes is weak (dispersion forces), and so fracture of a crystal of this kind usually produces cleavage planes CdI lattice 9
10 Energy Changes in the Formation of Ionic Crystals Na (s) + ½ Cl (g) NaCl (s) H reaction = H f (NaCl (s) ) Energy Changes in the Formation of Ionic Crystals Born-Fajans-Haber Cycle electron affinity ionization energy bond energy sublimation Lattice Energy (Ionic Bond Strength) Lattice Energies We have already looked at bond dissociation enthalpies (energy required to break bonds in homonuclear and heteronuclear diatomics) Energy is also required to break apart ionic lattices, due to the large amount of electrostatic forces that exist between the ions in the lattice Coulombic forces (attractions, repulsions) Born forces (electron-electron, nucleus-nucleus) Energy Between Two Point Charges Consider what happens if we bring two point charges from an infinite separation to form an ion pair: M z+ (g) + X z- (g) MX(g) We can calculate the change in internal energy ( U) as: Z + Z U = r 0 e 4π ε 0 Z -, Z + are the charges of the ions in electron units e is the charge of an electron (1.60 x C) ε o is the permittivity of a vacuum (8.854 x 10-1 C /J. m) r 0 is internuclear separation Because oppositely charged ions are attracted to one another, energy is released in this process Consider the attractions and repulsions that exist in a rock salt lattice (between oppositely-charged and like-charged ions) Z + Z U = r 0 e 4π ε 0 10
11 A Summary of Attractions and Repulsions The attractions experienced by the Na + ion are summarized as follows: 6 X z- ions, each at a distance d (the ions at the face sites) 1 M z+ ions, each at a distance ( )d (the ions at the edge sites) 8 X z- ions each at a distance ( 3)d (the ions at the corner sites) 6 M z+ ions each at a distance of ( 4)d (imagine the next set of pink spheres in figure beyond the face gray spheres) Madelung Constants We must factor these attractions and repulsions into the expression: e U = ( 6Z+ Z ) Z+ + Z+ Z Z+... 4πε o d 3 4 Convergent series, which yields a number for each lattice type that is called the Madelung constant, M Madelung Constants If we sum the interactions (attractive and repulsive) between the ions of this lattice, we get a convergent term (for this lattice, the value converges to a value of ~1.7476). This value is obtained regardless of the actual charges on the ions. Madelung constants (M) are unique for each coordination environment (i.e., for each type of crystal lattice). MZ+ Z U = r Table 7-, M. & T. 0 e 4π ε 0 Lattice Energy (almost there ) The internal energy change for the formation of one mole of an ionic lattice in this arrangement is then calculated as: NMZ+ Z U = r 0 e 4π ε 0 N = Avogadro s number (6.0 x 10 3 mol -1 ) but what about Born forces? (nuclear-nuclear, electron-electron forces) Lattice Energies If we consider electrostatic and Born forces, we arrive at the Born-Mayer equation (evaluated at equilibrium internuclear separation, r o ) This equation will enable us to predict lattice energies (called the calculated lattice energy U NMZ Z ρ + ( 0 K) = 1 r 0 4π ε 0 r0 ρ corrects for repulsions at short distances. Typically, a value of 30 pm is used for ρ. e Correction for Born forces Lattice Energies Lattice energy can be defined as the internal energy change associated with the formation of one mole of the solid from its constituent gas phase ions at 0 (zero) Kelvin. Thus, at 0K, the lattice energy corresponds to the process: M n+ (g) + nx- (g) MX n(s) Lattice energies may be estimated by assuming an electrostatic model (ions are point charges) a good approximation in some cases. In others, not so good. Lattice energy can also be defined as the energy required to pull apart an ionic lattice into its gas-phase ions, as defined in M&T, in which case, it is a positive energy 11
12 Sample Calculation: Lattice Energy Calculate the lattice energy for NaCl (r Na-Cl = 83 pm) U 3 ( )(1.7476) U (0K) = 1 4π ( C. J = J / mol = 767kJ / mol NMZ Z + ( 0 K) = 1 r 0 4π ε 0 r0 ( + 1)( ) 1. e 19 1 ( C) 30pm m )(83 10 m) 83pm Appendix B ρ r Na+ = 116 pm r Cl- = 167 pm Lattice Energies We see there is only a minor discrepancy between the value obtained with the Born-Mayer equation (-767 kj/mol) and the Born-Fajans-Haber thermodynamic cycle (-787 kj/mol) For NaCl, there s only a ~% difference between the calculated and experimental energies (an ionic model provides a good approximation of NaCl) Lattice Energies Since the calculated values agree so well (% error), we see the electrostatic model is a reasonably good assumption for the type of bonding which exists in a NaCl (s) lattice Not true for layered structures like CdI (s) recall the forces that exist in this structure We also see that for silver halides, the calculated and experimental energies differ greatly, in the order AgF<AgCl<AgBr<AgI. The bonding with larger halide ions has more covalent character, and thus an ionic approximation does not hold CHEM 45 Interactive 3-D Crystal Structures: F Cl Br I Radius Ratios These guidelines often yield incorrect predictions example: LiBr (r + /r - = 0.38; tetrahedral) Predict only one coordination geometry for a given combination of ions (not helpful for polymorphic samples) Examples: What is the coordination number of Ti in rutile? (r Ti3+ = 75 pm; r O- = 14 pm) What is C.N. of Ca in fluorite? (r Ca+ = 16 pm; r F- = 117 pm) What is C.N. of Zn in zinc blende? (r Zn+ = 77pm; r S- = 170 pm) Electrical Conductivity in Metals, Semiconductors, and Insulators Electrical conductivity is a property displayed by metals and some inorganic and organic materials Loosely defined as the ability of a substance to permit movement of electrons throughout its volume On a molecular level, electrons can be passed around (atomto-atom) by being promoted into empty orbitals on other atoms For solid structures a modification of Molecular Orbital Theory called Band Theory is used to explain conductivity 1
13 Electrical Conductivity and Resistivity Resistivity (ρ) measures a substance s electrical resistance for a wire of uniform cross-section l R = ρ = a ( resistivity / Ωm)( length / m) ( cross sectional _ area / m ) Resistance is measured in ohms (Ω) Conductivity is 1/resistivity. Units of conductivity are Ω -1 m -1 or S/m (S = Siemens; S = Ω -1 ) Electrical Conductivity and Resistivity electrical resistivity Ωm The resistivity of a metal increases (conductivity decreases) with increasing temperature Electrical Conductivity and Resistivity The resistivity of a semiconductor decreases (conductivity increases) with increasing temperature MO Theory Approach to Band Theory Consider a line of H-atoms that interact through their valence s-orbitals. As more H-atoms interact, more MO s are created Resistivity with temperature for a semiconductor In the infinite structure, there is a continuum of energy states - a band (non-quantized) Valence orbitals overlap to create a valence band Band Theory of Metals In order for electrons to be able to move through a material, they must jump from an occupied molecular orbital to an unoccupied orbital. In a metal, this should be easily accomplished (metals are highly conductive). Lithium (and other alkali metals) have a half-filled valence s-orbital (occupied). In the infinite solid, there will be a half-full band. Electrons can move into an unoccupied MO with minimal energy cost (small applied potential) unoccupied orbitals produce a conduction band density of states is greatest in the middle of the band Band that is created from occupied orbitals is called valence band Band Theory of Metals For the metal, Be (s ), how does electron movement occur? (valence band is full) The energy separation of s and p orbitals in Be is small enough that the conduction band (band that derives from unoccupied orbitals) overlaps the valence band electron movement can occur by an electron jumping from the valence band into an energy-matched unoccupied conduction band orbital 13
14 Semiconductors and Band Gaps In many materials (e.g. diamond), there is an energy gap (band gap, E g ) between the valence band and the conduction band For C, the energy separation that exists between the s and p valence orbitals is not small enough for valence band-conduction band overlap to occur in the bulk material (e.g. diamond) Metals have either partially filled valence bands or overlapping valence and conduction bands (e.g. Na) Insulators have fully occupied valence bands that are separated from the conduction band by a significant energy gap (e.g. diamond) Semiconductors have fully occupied bands that are separated from the valence band by a small energy gap (e.g. Si) overlapping valence and conduction bands Band Theory conduction valence band gap conduction valence Semiconductors For semiconductors, thermal energy will enable electrons to move into the empty conduction band, creating holes in the valence band (orbitals that were occupied by electrons). The mobile electrons (and holes) give rise to electrical conductivity. Pure materials that are electrically conductive called intrinsic semiconductors Extrinsic Semiconductors Certain semiconductors exhibit enhanced electrical conductivity when small quantities of another element are present in the semiconductor lattice (called doping). The band structure of silicon involves a band gap of approximately 106 kj/mol (1.11 ev) Introduction of either gallium or arsenic in very small quantities creates an extrinsic semiconductor, with a band gap of only about 10 kj/mol (0.10 ev) Si adopts a diamond lattice Semiconductors Semiconductors s p Ga Ga 14
15 Band Theory n-type Semiconductors overlapping valence and conduction bands band gap conduction conduction valence valence Arsenic-doped silicon contains atoms having an additional valence electron (As is gr. 5A, Si Gr. 4A). As in a Si lattice use four of its electrons in bonding (one left over) Even a small number of As atoms in the Si matrix creates a donor band with an energy just below the energy of the Si conduction band (~10 kj/mol below) Thermal energy can excite electrons from the donor band into the Si conduction band, yielding mobile charge carriers Si is n-doped by introducing P or As atoms The charge carriers in the Si band structure are electrons: n-type semiconductor p-type Semiconductors Ga has one less valence electron than Si Introduction of a small number of Ga atoms (Gr. 3A) into the Si lattice structure creates a hole (nothing for silicon s fourth electron to bond to) The energy of these holes creates a band just above the valence band energy (by ~ 10 kj/mol), an acceptor band Electrons can occupy this new band, leaving holes in the Si valence band * Semiconductors Semiconductors can be inorganic or organic Inorganic semiconductors consist of main group elements (Si, Ge, Ga, As, In, ) Organic semiconductors consist of conjugated carbon structures, typically oligomers or polymers n * * n * S * * n H N * * n N * * n The mobile holes in Si band structure yield conductivity a p-type semiconductor Semiconductor Devices Thermal population of unoccupied states makes these materials conductive; at 0 K, electrons occupy lowest possible energies The Fermi energy is energy at which an electron is equally likely to be in occupied and unoccupied bands Semiconductor Devices The Fermi level serves to set the relative energies of the p- type and n-type interfaces, and is the energy at which an e - is equally likely to be in the valence or conduction band. In an intrinsic semiconductor, this lies in the middle of the bandgap of the host semiconductor Doping: lowers the energy of the Fermi level to the region between the acceptor band and the top of the host s valence band raises the energy of the Fermi level to between the donor band and the bottom edge of the host s conduction band p-type semiconductor at 0 K (left) and at 98 K (right) n-type semiconductor at 0 K (left) and at 98 K (right) intrinsic p-type n-type 15
16 Semiconductor Devices When n- and p-type semiconductors contact, mobile electrons in the n-type layer near the interface can migrate into the p-type layer, resulting in recombination The extra electrons in the p-type layer raise its energy and new holes in the n- type layer lower its energy. Charge movement ceases nearly immediately, as the p-type layer accumulates negative charge and the n-type layer positive charge Recombination results in the formation of a depletion zone at the junction. This depletion zone is accompanied by its own potential p,n-junction When this kind of device is connected to a DC power source, a connection can be made in two ways: 1. Negative terminal to n-type layer, positive terminal to p-type layer (forward bias): as the potential at the negative terminal is made more negative (and the positive terminal more positive), the potential difference of the depletion zone can be overcome and a current flows (e - s repelled by terminal; holes repelled by + terminal) Diodes + power supply -. Negative terminal to p-type layer; positive terminal to n- type layer (reverse bias): electrons and holes are pulled away from the depletion zone. Charge cannot move across the junction and there is essentially zero current Diodes - power supply + Diodes Diodes are semiconductor devices which permit current to flow in one direction but not the other (current rectifying), made through combinations of p-type and n-type semiconductors Such devices are useful in electronics (e.g. in common circuitry) Photovoltaic Cells Photoswitches In the absence of an applied potential, electrons can be made to jump from valence to conduction bands by absorbing radiation (e.g. sunlight) and through external connections, can be used to power electronics (solar calculators, solar panels) Under reverse bias conditions, if the bandgap is small enough, visible radiation may be sufficient to promote electrons from the valence band to the conduction band (thus current flows in the presence of light a photoswitch) Used in sensors (photodetectors for UV, visible, infrared radiation), automatic lights, etc. 16
17 Light Emitting Diodes (LEDs) Under forward bias conditions, electrons move from the n- type layer (conduction band) into the p-type layer (valence band) This movement results in recombination (releases energy). When electrons fall into the holes of the p-doped layer, if the energy change is of the right magnitude, visible light will be emitted (luminescence) The color of the radiation emitted will depend on the bandgap (E g ), so by varying the bandgap (by controlling the composition of the semiconductor material), different colors can be produced Microscopic to Macroscopic (Atomic Properties to Bulk Properties) atoms, molecules discrete orbitals, energy states Quantum Dots < 10 nm Energy levels depend strongly on size bulk solids bands, non-quantized Quantum Dots Photoluminescence of colloidal ZnSe Quantum Dots 17
SOLID STATE CHEMISTRY
SOLID STATE CHEMISTRY Crystal Structure Solids are divided into 2 categories: I. Crystalline possesses rigid and long-range order; its atoms, molecules or ions occupy specific positions, e.g. ice II. Amorphous
More informationIonic Bonding. Chem
Whereas the term covalent implies sharing of electrons between atoms, the term ionic indicates that electrons are taken from one atom by another. The nature of ionic bonding is very different than that
More informationSolids. properties & structure
Solids properties & structure Determining Crystal Structure crystalline solids have a very regular geometric arrangement of their particles the arrangement of the particles and distances between them is
More informationMetallic and Ionic Structures and Bonding
Metallic and Ionic Structures and Bonding Ionic compounds are formed between elements having an electronegativity difference of about 2.0 or greater. Simple ionic compounds are characterized by high melting
More informationMetallic & Ionic Solids. Crystal Lattices. Properties of Solids. Network Solids. Types of Solids. Chapter 13 Solids. Chapter 13
1 Metallic & Ionic Solids Chapter 13 The Chemistry of Solids Jeffrey Mack California State University, Sacramento Crystal Lattices Properties of Solids Regular 3-D arrangements of equivalent LATTICE POINTS
More informationInorganic Chemistry I (CH331) Solid-state Chemistry I (Crystal structure) Nattapol Laorodphan (Chulabhorn Building, 4 th Floor)
Inorganic Chemistry I (CH331) Solid-state Chemistry I (Crystal structure) Nattapol Laorodphan (Chulabhorn Building, 4 th Floor) 7/2013 N.Laorodphan 1 Text books : 1. D.F. Sheiver, P.W. Atkins & C.H. Langford
More informationAtomic Arrangement. Primer in Materials Spring
Atomic Arrangement Primer in Materials Spring 2017 30.4.2017 1 Levels of atomic arrangements No order In gases, for example the atoms have no order, they are randomly distributed filling the volume to
More informationStructures of Solids. Unit Cells - Not(?) Chapter 4 Ionic and Other Inorganic Solids. CHEM 462 Wednesday, September 22 T.
Chapter 4 Ionic and Other Inorganic Solids CHEM 462 Wednesday, September 22 T. Hughbanks Structures of Solids Many dense solids are described in terms of packing of atoms or ions. Although these geometric
More information4. Interpenetrating simple cubic
2 1. The correct structure t of CsClCl crystal is 1. Simple cubic 2. Body centered cubic 3. Face centered cubic 4. Interpenetrating simple cubic If corner as well as the particle at the center are same
More informationChem 241. Lecture 21. UMass Amherst Biochemistry... Teaching Initiative
Chem 241 Lecture 21 UMass Amherst Biochemistry... Teaching Initiative Announcement March 26 Second Exam Recap Calculation of space filling Counting atoms Alloys Ionic Solids Rock Salt CsCl... 2 ZnS Sphalerite/
More informationExperiment 7: Understanding Crystal Structures
Experiment 7: Understanding Crystal Structures To do well in this laboratory experiment you need to be familiar with the concepts of lattice, crystal structure, unit cell, coordination number, the different
More informationE12 UNDERSTANDING CRYSTAL STRUCTURES
E1 UNDERSTANDING CRYSTAL STRUCTURES 1 Introduction In this experiment, the structures of many elements and compounds are rationalized using simple packing models. The pre-work revises and extends the material
More informationUnit wise Marks Distribution of 10+2 Syllabus
Unit wise Marks Distribution of 10+2 Syllabus S.No Unit Name Marks 1 I Solid State 4 2 II Solutions 5 3 III Electro Chemistry 5 4 IV Chemical Kinetics 5 5 V Surface Chemistry 4 6 VI General Principles
More informationChem 241. Lecture 20. UMass Amherst Biochemistry... Teaching Initiative
Chem 241 Lecture 20 UMass Amherst Biochemistry... Teaching Initiative Announcement March 26 Second Exam Recap Ellingham Diagram Inorganic Solids Unit Cell Fractional Coordinates Packing... 2 Inorganic
More informationAtomic Arrangement. Primer Materials For Science Teaching Spring
Atomic Arrangement Primer Materials For Science Teaching Spring 2016 31.3.2015 Levels of atomic arrangements No order In gases, for example the atoms have no order, they are randomly distributed filling
More informationChapter 3 (part 3) The Structures of Simple Solids
CHM 511 chapter 3 page 1 of 9 Chapter 3 (part 3) The Structures of Simple Solids Rationalizing Structures Ionic radii As noted earlier, a reference value is needed. Usually oxygen is assumed to be 140
More informationELEMENTARY BAND THEORY
ELEMENTARY BAND THEORY PHYSICIST Solid state band Valence band, VB Conduction band, CB Fermi energy, E F Bloch orbital, delocalized n-doping p-doping Band gap, E g Direct band gap Indirect band gap Phonon
More informationChapter 10. Liquids and Solids
Chapter 10 Liquids and Solids Chapter 10 Table of Contents 10.1 Intermolecular Forces 10.2 The Liquid State 10.3 An Introduction to Structures and Types of Solids 10.4 Structure and Bonding in Metals 10.5
More informationThe Solid State. Phase diagrams Crystals and symmetry Unit cells and packing Types of solid
The Solid State Phase diagrams Crystals and symmetry Unit cells and packing Types of solid Learning objectives Apply phase diagrams to prediction of phase behaviour Describe distinguishing features of
More informationHW# 5 CHEM 281 Louisiana Tech University, POGIL(Process Oriented Guided Inquiry Learning) Exercise on Chapter 3. Structures of Ionic Solids. Why?
HW# 5 CHEM 281 Louisiana Tech University, POGIL(Process Oriented Guided Inquiry Learning) Exercise on Chapter 3. Structures of Ionic Solids. Why? Many ionic structures may be described as close-packed
More informationRemember the purpose of this reading assignment is to prepare you for class. Reading for familiarity not mastery is expected.
Remember the purpose of this reading assignment is to prepare you for class. Reading for familiarity not mastery is expected. After completing this reading assignment and reviewing the intro video you
More informationChapter 3. The structure of crystalline solids 3.1. Crystal structures
Chapter 3. The structure of crystalline solids 3.1. Crystal structures 3.1.1. Fundamental concepts 3.1.2. Unit cells 3.1.3. Metallic crystal structures 3.1.4. Ceramic crystal structures 3.1.5. Silicate
More informationVERY SHORT ANSWER TYPE QUESTIONS (1 Mark)
UNIT I 10 Chemistry-XII THE SOLID STATE VERY SHORT ANSWER TYPE QUESTIONS (1 Mark) Q. 1. What do you mean by paramagnetic substance? Ans. Weakly attracted by magnetic eld and these substances are made of
More informationCHEMISTRY The Molecular Nature of Matter and Change
CHEMISTRY The Molecular Nature of Matter and Change Third Edition Chapter 12 Copyright The McGraw-Hill Companies, Inc. Permission required for reproduction or display. Chapter 11 INTERMOLECULAR FORCES
More informationDiamond. There are four types of solid: -Hard Structure - Tetrahedral atomic arrangement. What hybrid state do you think the carbon has?
Bonding in Solids Bonding in Solids There are four types of solid: 1. Molecular (formed from molecules) - usually soft with low melting points and poor conductivity. 2. Covalent network - very hard with
More informationThere are four types of solid:
Bonding in Solids There are four types of solid: 1. Molecular (formed from molecules) - usually soft with low melting points and poor conductivity. 2. Covalent network - very hard with very high melting
More informationCHM 511 chapter 3 page 1 of 23
CHM 511 chapter 3 page 1 of 23 Chapter 3 The Structures of Simple Solids Types of bonding in solids Covalent Significant sharing of electrons between atoms. Can form vast arrays (e.g. C diamond, graphite;
More informationChapter 10. Liquids and Solids
Chapter 10 Liquids and Solids Section 10.1 Intermolecular Forces Section 10.1 Intermolecular Forces Section 10.1 Intermolecular Forces Section 10.1 Intermolecular Forces Metallic bonds Covalent bonds Ionic
More informationNotes on Solids and Liquids
THE LIQUID STATE Notes on Solids and Liquids Why do liquids tend to bead up when on a solid surface? The effect of uneven pull on surface molecules draws them into the body of the liquid causing droplet
More informationWhat happens when substances freeze into solids? Less thermal energy available Less motion of the molecules More ordered spatial properties
Chapter #16 Liquids and Solids 16.1) Intermolecular Forces 16.2) The Liquid State 16.3) An Introduction to Structures and Types of Solids 16.4) Structure and Bonding of Metals 16.5) Carbon and Silicon:
More informationReport Form for Experiment 6: Solid State Structures
Report Form for Experiment 6: Solid State Structures Note: Many of these questions will not make sense if you are not reading the accompanying lab handout. Station 1. Simple Cubic Lattice 1. How many unit
More informationAP* Chapter 10. Liquids and Solids. Friday, November 22, 13
AP* Chapter 10 Liquids and Solids AP Learning Objectives LO 1.11 The student can analyze data, based on periodicity and the properties of binary compounds, to identify patterns and generate hypotheses
More informationLecture 04 Structure of Ceramics 1 Ref: Barsoum, Fundamentals of Ceramics, Ch03, McGraw-Hill, 2000.
MME 467 Ceramics for Advanced Applications Lecture 04 Structure of Ceramics 1 Ref: Barsoum, Fundamentals of Ceramics, Ch03, McGraw-Hill, 2000. Prof. A. K. M. Bazlur Rashid Department of MME, BUET, Dhaka
More informationChapter 12. Solids and Modern Materials
Lecture Presentation Chapter 12 Solids and Modern Materials Graphene Thinnest, strongest known material; only one atom thick Conducts heat and electricity Transparent and completely impermeable to all
More informationLattice energy of ionic solids
1 Lattice energy of ionic solids Interatomic Forces Solids are aggregates of atoms, ions or molecules. The bonding between these particles may be understood in terms of forces that play between them. Attractive
More informationChapter 12 INTERMOLECULAR FORCES. Covalent Radius and van der Waals Radius. Intraand. Intermolecular Forces. ½ the distance of non-bonded
Chapter 2 INTERMOLECULAR FORCES Intraand Intermolecular Forces Covalent Radius and van der Waals Radius ½ the distance of bonded ½ the distance of non-bonded Dipole Dipole Interactions Covalent and van
More informationChapter 12 Solids and Modern Materials
Sec$on 10.3 An Introduc+on to Structures and Types of Solids Chapter 12 Solids and Modern Materials Sec$on 10.3 An Introduc+on to Structures and Types of Solids Solids Amorphous Solids: Disorder in the
More informationCHEM Principles of Chemistry II Chapter 10 - Liquids and Solids
CHEM 1212 - Principles of Chemistry II Chapter 10 - Liquids and Solids 10.1 Intermolecular Forces recall intramolecular (within the molecule) bonding whereby atoms can form stable units called molecules
More informationChapter 7 Ionic and Metallic Bonding
Chapter 7 Ionic and Metallic Bonding Section 7.1 - Ions OBJECTIVES: Determine the number of valence electrons in an atom of a representative element. Section 7.1 - Ions OBJECTIVES: Explain how the octet
More informationEXAM TWO PART ONE CHM 451 (INORGANIC CHEMISTRY) DR. MATTSON 1 NOVEMBER 2012
EXAM TWO PART ONE CHM 451 (INORGANIC CHEMISTRY) DR. MATTSON 1 NOVEMBER 2012 NAME: Instructions: This exam has two parts. In Part One, only a pencil and a non-programmable calculator may be used. When you
More informationMidterm I Results. Mean: 35.5 (out of 100 pts) Median: 33 Mode: 25 Max: 104 Min: 2 SD: 18. Compare to: 2013 Mean: 59% 2014 Mean: 51%??
Midterm I Results Mean: 35.5 (out of 100 pts) Median: 33 Mode: 25 Max: 104 Min: 2 SD: 18 Compare to: 2013 Mean: 59% 2014 Mean: 51%?? Crystal Thermodynamics and Electronic Structure Chapter 7 Monday, October
More informationElectrons responsible for the chemical properties of atoms Electrons in the outer energy level Valence electrons are the s and p electrons in the
Electrons responsible for the chemical properties of atoms Electrons in the outer energy level Valence electrons are the s and p electrons in the outermost, or highest energy level The number of Valence
More informationIonic Bonding. Example: Atomic Radius: Na (r = 0.192nm) Cl (r = 0.099nm) Ionic Radius : Na (r = 0.095nm) Cl (r = 0.181nm)
Ionic Bonding Ion: an atom or molecule that gains or loses electrons (acquires an electrical charge). Atoms form cations (+charge), when they lose electrons, or anions (- charge), when they gain electrons.
More informationionic solids Ionic Solids
ionic solids Ionic Solids Properties characteristic of ionic solids low conductivity as solids, high when molten high melting points hard brittle solids soluble in polar solvents high melting Hardness
More informationClose-packing: - hexagonal close packing. - Cubic close packing. MO vs. band structure: - Diodes, QD
Chapter 7. The Crystalline Solid State What is the crystalline solid state?: - unitcell, crystal system, - Bravais lattice, lattice centering Close-packing: - hexagonal close packing - Cubic close packing
More informationChapter 10: Liquids and Solids
Chapter 10: Liquids and Solids Chapter 10: Liquids and Solids *Liquids and solids show many similarities and are strikingly different from their gaseous state. 10.1 Intermolecular Forces Intermolecular
More informationCrystalline Solids. Amorphous Solids
Crystal Structure Crystalline Solids Possess rigid and long-range order; atoms, molecules, or ions occupy specific positions the tendency is to maximize attractive forces Amorphous Solids lack long-range
More informationChapter 10 Review Packet
Chapter 10 Review Packet Name 1. If water and carbon dioxide molecules did interact, what major intermolecular force will exist between these molecules? a) Hydrogen bonding b) London dispersion c) Dipole-dipole
More informationChapter 12: Structures & Properties of Ceramics
Chapter 12: Structures & Properties of Ceramics ISSUES TO ADDRESS... Bonding and structure of ceramic materials as compared with metals Chapter 12-1 Atomic Bonding in Ceramics Bonding: -- Can be ionic
More informationProperties of Liquids and Solids. Vaporization of Liquids. Vaporization of Liquids. Aims:
Properties of Liquids and Solids Petrucci, Harwood and Herring: Chapter 13 Aims: To use the ideas of intermolecular forces to: Explain the properties of liquids using intermolecular forces Understand the
More informationProperties of Liquids and Solids. Vaporization of Liquids
Properties of Liquids and Solids Petrucci, Harwood and Herring: Chapter 13 Aims: To use the ideas of intermolecular forces to: Explain the properties of liquids using intermolecular forces Understand the
More informationSOLID STATE MODULE - 3. Objectives. Solid State. States of matter. Notes
Solid State MODULE - 3 8 SOLID STATE Y ou are aware that the matter exists in three different states viz., solid, liquid and gas. In these, the constituent particles (atoms, molecules or ions) are held
More informationIonic Bonding - Electrostatic Interactions and Polarization
Ionic Bonding - Electrostatic Interactions and Polarization Chemistry 754 Solid State Chemistry Dr. Patrick Woodward Lecture #13 Born-Haber Cycle for NaCl It is energetically unfavorable for Na metal and
More informationChapter 9. Liquids and Solids
Chapter 9 Liquids and Solids Chapter 9 Table of Contents (9.1) (9.2) (9.3) (9.4) (9.5) (9.6) (9.7) (9.8) (9.9) (9.10) Intermolecular forces The liquid state An introduction to structures and types of solids
More informationChemistry 101 Chapter 9 CHEMICAL BONDING. Chemical bonds are strong attractive force that exists between the atoms of a substance
CHEMICAL BONDING Chemical bonds are strong attractive force that exists between the atoms of a substance Chemical Bonds are commonly classified into 3 types: 1. IONIC BONDING Ionic bonds usually form between
More informationChapter 7. Ionic Compounds and Metals
Chapter 7 Ionic Compounds and Metals Periodic Trends Metals O Hate electrons O Give electrons away. O Have a low ionization energy. O Ions are always postive. O Cations (meow) Non-Metals O Love electrons
More informationBonding and Packing: building crystalline solids
Bonding and Packing: building crystalline solids The major forces of BONDING Gravitational forces: F = G m m 1 2 F = attractive forces between 2 bodies G = universal graviational constant (6.6767 * 10
More informationStates of Matter SM VIII (post) Crystallography. Experimental Basis. Experimental Basis Crystal Systems Closed Packing Ionic Structures
States of Matter SM VIII (post) Crystallography Experimental Basis Crystal Systems Closed Packing Ionic Structures Ref 12: 8 22-1 Experimental Basis is X-ray diffraction; see HT Fig. 21.1, Pet. Fig. 12.43
More informationChapter 11. Intermolecular Forces and Liquids & Solids
Chapter 11 Intermolecular Forces and Liquids & Solids The Kinetic Molecular Theory of Liquids & Solids Gases vs. Liquids & Solids difference is distance between molecules Liquids Molecules close together;
More informationWhy is water so awesome?
Why is water so awesome? (Near) universal solvent The high polarity (and, therefore, hydrogen bonding power) of water means it can dissolve so many compounds ionic compounds, polar, nonionic compounds
More informationIonic bonds occur between a metal and a nonmetal. Covalent bonds occur between two or more nonmetals. Metallic bonds occur between metal atoms only.
Ionic bonds occur between a metal and a nonmetal. Covalent bonds occur between two or more nonmetals. Metallic bonds occur between metal atoms only. Using chemical equations to show ionization: Na Na +
More informationGHW#3. Chapter 3. Louisiana Tech University, Chemistry 481. POGIL(Process Oriented Guided Inquiry Learning) Exercise on Chapter 3.
GHW#3. Chapter 3. Louisiana Tech University, Chemistry 481. POGIL(Process Oriented Guided Inquiry Learning) Exercise on Chapter 3. Energetics of Ionic Bonding. Why? What are the properties of ionic compounds?
More informationChapter 12. Insert picture from First page of chapter. Intermolecular Forces and the Physical Properties of Liquids and Solids
Chapter 12 Insert picture from First page of chapter Intermolecular Forces and the Physical Properties of Liquids and Solids Copyright McGraw-Hill 2009 1 12.1 Intermolecular Forces Intermolecular forces
More informationChapter 11 Intermolecular Forces, Liquids, and Solids
Chapter 11 Intermolecular Forces, Liquids, and Solids Dissolution of an ionic compound States of Matter The fundamental difference between states of matter is the distance between particles. States of
More information* motif: a single or repeated design or color
Chapter 2. Structure A. Electronic structure vs. Geometric structure B. Clean surface vs. Adsorbate covered surface (substrate + overlayer) C. Adsorbate structure - how are the adsorbed molecules bound
More informationExperiment 2a Models of the Solid State*
Experiment 2a Models of the Solid State* *This lab is adapted from solid-state labs offered at Purdue and Rice Universities. Introduction The structures of metals and simple ionic solids are prototypes
More informationChapter 11: Intermolecular Forces. Lecture Outline
Intermolecular Forces, Liquids, and Solids 1 Chapter 11: Intermolecular Forces Lecture Outline 11.1 A Molecular Comparison of Gases, Liquids and Solids Physical properties of substances are understood
More informationChapter 9 Ionic and Covalent Bonding
Chem 1045 Prof George W.J. Kenney, Jr General Chemistry by Ebbing and Gammon, 8th Edition Last Update: 06-April-2009 Chapter 9 Ionic and Covalent Bonding These Notes are to SUPPLIMENT the Text, They do
More information15.2 Born-Haber Cycles
15.2 Born-Haber Cycles 15.2.1 - Define and apply the terms lattice enthalpy and electron affinity Lattice Enthalpy The energy required to completely separate one mole of a solid ionic compound into its
More informationInorganic Exam 1 Chm October 2010
Inorganic Exam 1 Chm 451 28 October 2010 Name: Instructions. Always show your work where required for full credit. 1. In the molecule CO 2, the first step in the construction of the MO diagram was to consider
More informationSolid Type of solid Type of particle Al(s) aluminium MgCl2 Magnesium chloride S8(s) sulfur
QUESTION (2017:1) (iii) Sodium chloride, NaCl, is another compound that is excreted from the body in sweat. Use your knowledge of structure and bonding to explain the dissolving process of sodium chloride,
More informationIonic Bond, Latice energy, characteristic of Ionic compounds
Ionic Bond, Latice energy, characteristic of Ionic compounds 1. The strong electrostatic attraction between two oppositely charged ions which are formed due to transfer of electrons from one atom to another
More informationUNIT-1 SOLID STATE. Ans. Gallium (Ga) is a silvery white metal, liquid at room temp. It expands by 3.1% on solidifica-tion.
UNIT-1 SOLID STATE 1 MARK QUESTIONS Q. 1. Name a liquefied metal which expands on solidification. Ans. Gallium (Ga) is a silvery white metal, liquid at room temp. It expands by 3.1% on solidifica-tion.
More informationChapter 3. Crystal Binding
Chapter 3. Crystal Binding Energy of a crystal and crystal binding Cohesive energy of Molecular crystals Ionic crystals Metallic crystals Elasticity What causes matter to exist in three different forms?
More informationIonic and Metallic Bonding
Ionic and Metallic Bonding 7.1 Ions BONDING AND INTERACTIONS Essential Understanding electrically charged. Ions form when atoms gain or lose valence electrons, becoming Lesson Summary Valence Electrons
More informationCHEM1902/ N-2 November 2014
CHEM1902/4 2014-N-2 November 2014 The cubic form of boron nitride (borazon) is the second-hardest material after diamond and it crystallizes with the structure shown below. The large spheres represent
More informationCartoon courtesy of NearingZero.net. Unit 3: Chemical Bonding and Molecular Structure
Cartoon courtesy of NearingZero.net Unit 3: Chemical Bonding and Molecular Structure Bonds Forces that hold groups of atoms together and make them function as a unit. Ionic bonds transfer of electrons
More information100% ionic compounds do not exist but predominantly ionic compounds are formed when metals combine with non-metals.
2.21 Ionic Bonding 100% ionic compounds do not exist but predominantly ionic compounds are formed when metals combine with non-metals. Forming ions Metal atoms lose electrons to form +ve ions. Non-metal
More informationChemical Bonding Ionic Bonding. Unit 1 Chapter 2
Chemical Bonding Ionic Bonding Unit 1 Chapter 2 Valence Electrons The electrons responsible for the chemical properties of atoms are those in the outer energy level. Valence electrons - The s and p electrons
More informationS.No. Crystalline Solids Amorphous solids 1 Regular internal arrangement of irregular internal arrangement of particles
Classification of solids: Crystalline and Amorphous solids: S.No. Crystalline Solids Amorphous solids 1 Regular internal arrangement of irregular internal arrangement of particles particles 2 Sharp melting
More informationMODERN PUBLISHERS (Producers of Quality Text & Competition Books)
MODERN PUBLISHERS (Producers of Quality Text & Competition Books) UR ADDRESSES IN INDIA MBD PRINTOGRAPHICS (P) LTD. Ram Nagar, Industrial Area, Gagret, Distt. Una (H.P.) and...write to save nature we
More informationIntermolecular Forces. Chapter 16 Liquids and Solids. Intermolecular Forces. Intermolecular Forces. Intermolecular Forces. Intermolecular Forces
Big Idea: Systems that form macromolecules (ionic, metallic, and covalent network) have the strongest interactions between formula units. Systems that cannot form macro molecules still contain intermolecular
More informationChem 728 Introduction to Solid Surfaces
Chem 728 Introduction to Solid Surfaces Solids: hard; fracture; not compressible; molecules close to each other Liquids: molecules mobile, but quite close to each other Gases: molecules very mobile; compressible
More informationSolid State. Subtopics
01 Solid State Chapter 01: Solid State Subtopics 1.0 Introduction 1.1 Classification of solids 1.2 Classification of crystalline solids 1.3 Unit cell, two and three dimensional lattices and number of atoms
More informationEnergetics of Bond Formation
BONDING, Part 4 Energetics of Bond Formation 167 Energetics of Covalent Bond Formation 168 1 169 Trends in Bond Energies the more electrons two atoms share, the stronger the covalent bond C C (837 kj)
More informationBonding. Polar Vs. Nonpolar Covalent Bonds. Ionic or Covalent? Identifying Bond Types. Solutions + -
Chemical Bond Mutual attraction between the nuclei and valence electrons of different atoms that binds them together. Bonding onors Chemistry 412 Chapter 6 Types of Bonds Ionic Bonds Force of attraction
More informationChapter 1 Overview of Semiconductor Materials and Physics
Chapter 1 Overview of Semiconductor Materials and Physics Professor Paul K. Chu Conductivity / Resistivity of Insulators, Semiconductors, and Conductors Semiconductor Elements Period II III IV V VI 2 B
More informationFree Electron Model for Metals
Free Electron Model for Metals Metals are very good at conducting both heat and electricity. A lattice of in a sea of electrons shared between all nuclei (moving freely between them): This is referred
More information3-D Crystal Lattice Images
3-D Crystal Lattice Images All of the following images are crossed-stereo pairs. To view them, cross your eyes and focus. Author's note this material has been expanded and updated, and can be found at
More informationPhysical Chemistry I. Crystal Structure
Physical Chemistry I Crystal Structure Crystal Structure Introduction Crystal Lattice Bravis Lattices Crytal Planes, Miller indices Distances between planes Diffraction patters Bragg s law X-ray radiation
More informationFree Electron Model for Metals
Free Electron Model for Metals Metals are very good at conducting both heat and electricity. A lattice of in a sea of electrons shared between all nuclei (moving freely between them): This is referred
More informationChapter 6. Chemical Bonding
Chapter 6 Chemical Bonding Section 6.1 Intro to Chemical Bonding 6.1 Objectives Define chemical bond. Explain why most atoms form chemical bonds. Describe ionic and covalent bonding. Explain why most chemical
More informationCeramic Bonding. CaF 2 : large SiC: small
Recall ceramic bonding: - Mixed ionic and covalent. - % ionic character ( f ) increases with difference in electronegativity Large vs small ionic bond character: Ceramic Bonding CaF : large SiC: small
More informationModels Of Chemical Bonding. Chapter Nine. AP Chemistry
Models Of Chemical Bonding Chapter Nine AP Chemistry Q. Why do atoms bond? A. To lower the potential energy between positive and negative particles. Atoms like humans seek to become more stable. Metals
More informationก ก ก Intermolecular Forces: Liquids, Solids, and Phase Changes
ก ก ก Intermolecular Forces: Liquids, Solids, and Phase Changes ก ก ก ก Mc-Graw Hill 1 Intermolecular Forces: Liquids, Solids, and Phase Changes 12.1 An Overview of Physical States and Phase Changes 12.2
More informationCHAPTER 8 Ionic and Metallic Bonds
CHAPTER 8 Ionic and Metallic Bonds Shows the kind of atoms and number of atoms in a compound. MgCl 2 NaCl CaCO 3 Al 2 O 3 Ca 3 (PO 4 ) 2 Chemical Formulas Al: Cl: counting atoms AlCl 3 Pb: N: O: Pb(NO
More informationCrystals, packings etc.
Crystals, packings etc. Ram Seshadri MRL 2031, x6129, seshadri@mrl.ucsb.edu These notes complement chapter 6 of Anderson, Leaver, Leevers and Rawlings Bond Distances We have seen that in the P-cubic structure,
More informationTypes of Bonding : Ionic Compounds. Types of Bonding : Ionic Compounds
Types of Bonding : Ionic Compounds Ionic bonding involves the complete TRANSFER of electrons from one atom to another. Usually observed when a metal bonds to a nonmetal. - - - - - - + + + + + + + + + +
More informationTopics in the June 2006 Exam Paper for CHEM1901
June 006 Topics in the June 006 Exam Paper for CHEM1901 Click on the links for resources on each topic. 006-J-: 006-J-3: 006-J-4: 006-J-5: 006-J-6: 006-J-7: 006-J-8: 006-J-9: 006-J-10: 006-J-11: 006-J-1:
More information1 8 =1 8 8 =1 6 =3. Unit cell Atoms at corner Atoms at faces Atoms at centre. Total no. of atoms per unit cell. bcc. fcc
Q. No. Amorphous substances show () Short and long range order (2) Short range order (3) Long range order (4) Have no sharp M.P. Option and 3 are correct Option 2 2 and 3 are correct Option 3 3 and 4 are
More information