CLASSIFICATION OF REACTION TO FIRE PERFORMANCE IN ACCORDANCE WITH EN :2007+A1:2009

Transcription

1 P.O. Box ZN Bleiswij k Brandpunt laan Zuid NZ Bleiswij k The Net herlands nederland@efect is.com OF REACTION TO FIRE PERFORMANCE IN ACCORDANCE WITH EN :2007+A1:2009 Classificat ion no. Sponsor Product name Willem Eint hovenst raat BH OEGSTGEEST MPI 3000/ 3020 HOP series Prepared by BV Not ified body no Aut hor(s) C.C.M. St einhage B.Sc. A.J. Lock Proj ect number ENL Dat e of issue Number of pages 6 All right s reserved. No part of t his publicat ion may be reproduced and/ or published wit hout t he previous writ t en consent of. Submit t ing t he report for inspect ion t o part ies who have a direct int erest is permit t ed. In case t his report was draft ed on inst ruct ions, t he right s and obligat ions of cont ract ing part ies are subj ect t o eit her t he St andard Condit ions of Ef ect is Nederland or t he relevant agreement concluded bet ween t he cont ract ing part ies Efectis Nederland BV Page 1 / 6

2 1. INTRODUCTION This classificat ion report defines t he classificat ion assigned t o MPI MPI 3000/ 3020 HOP series in accordance wit h t he procedures given in EN :2007+A1: DETAILS OF CLASSIFIED PRODUCT 2.1 GENERAL The product, MPI 3000/ 3020 HOP series, is defined as a mult ipurpose film product t hat will be used for all kind of applicat ions. 2.2 MANUFACTURER Graphics & Ref lect ive Solut ions P.O. Box AA LEIDEN 2.3 PRODUCT DESCRIPTION According t o t he sponsor t he product is composed of: MPI 3000 HOP series Film: 95 µm gloss whit e high opacit y Adhesive: MPI 3000 HOP: Permanent, clear, acrylic based MPI 3001 HOP: Removable, clear, acrylic based Backing paper: Clay coat ed kraft paper, 125 g/ m 2 MPI 3020 HOP series Film : 95 µm mat t whit e high opacit y Adhesive : MPI 3020 HOP: Permanent, clear, acrylic based MPI 3021 HOP: Removable, clear, acrylic based Backing paper: Clay coat ed kraft paper, 125 g/ m 2 The product has a t hickness of approx. 95 µm and a mass per unit area of approx. 150 g/ m 2, (measured on t he product ). See also Product dat a sheet in t he t est report s. This report consist s of six pages and may only be used in it s ent iret y. Page 2 / 6

3 3. STANDARDS, REPORTS, RESULTS AND CRITERIA IN SUPPORT OF THIS 3.1 APPLICABLE (PRODUCT) STANDARDS EN ISO :2010 React ion t o fire t est s Ignit abilit y of product s subj ect ed t o direct impingement of flame Part 2: Singleflame source t est EN 13823:2010+A1:2014 React ion t o fire t est s for building product s Building product s, excluding f loorings exposed t o t he t hermal at t ack by a single burning it em EN :2007+A1:2009 Fire classificat ion of const ruct ion product s and building element s Part 1: Classificat ion using dat a from react ion t o fire t est s 3.2 REPORTS Name of Laboratories Name of sponsor Report ref. no. Test method BV Graphics & Ref lect ive Solut ions 2016Efect isr Efect isr EN ISO :2010 EN 13823: TEST RESULTS Test method and test number EN ISO surface flame impingement Edge f lame Impingement Parameter No. tests Continuous parameter mean (m) Results Compliance with parameters Fs 150 mm 20 6 Ignit ion of filt er paper Fs 150 mm 18 6 Ignit ion of filt er paper EN MPI 3001 FIGRA 0. 2MJ [W/ s] 94 THR 600s [MJ] TSP 600s [m 2 ] 37 This report consist s of six pages and may only be used in it s ent iret y. Page 3 / 6

4 Results Test method and test number Parameter No. tests Continuous parameter mean (m) Compliance with parameters EN MPI 3000 FIGRA 0. 2MJ [W/ s] 0 THR 600s [MJ] TSP 600s [m 2 ] 54 MPI 3020 FIGRA 0. 2MJ [W/ s] 0 THR 600s [MJ] TSP 600s [m 2 ] 60 MPI 3021 FIGRA 0. 2MJ [W/ s] 46 THR 600s [MJ] TSP 600s [m 2 ] 61 This report consist s of six pages and may only be used in it s ent iret y. Page 4 / 6

5 3.4 CRITERIA Classification criteria Fire classification of construction products and building elements Excluding floorings and linear pipe t hermal insulat ion product s Class Test met hod(s) B C D EN ISO Exposure = 30 s EN Additional classification F s 150 mm within 60 s Ignit ion of t he paper in EN ISO result s in a d2 classificat ion. FIGRA 0. 2 MJ 120 W/s LFS < edge of specimen THR 600s 7.5 MJ FIGRA 0. 4 MJ 250 W/s LFS < edge of specimen THR 600s 15 MJ Smoke product ion s1 = SMOGRA 30 m 2 / s 2 and TSP 600s 50 m 2 ; s2 = SMOGRA 180 m 2 / s 2 and TSP 600s 200 m 2 ; s3 = not s1 or s2 Flaming Droplet s/ part icles FIGRA 0. 4 MJ 750 W/s d0 = no flaming droplet s/ part icles in EN wit hin 600 s; d1 = no flaming droplet s/ part icles persist ing longer t han 10 s in EN wit hin 600 s; d2 = not d0 or d1. 4. AND FIELD OF APPLICATION 4.1 REFERENCE OF This classificat ion has been carried out in accordance wit h clause 11 of EN :2007+ A1: The product, MPI 3000/ 3020 HOP series, in relat ion t o it s react ion t o fire behaviour is classified: The addit ional classificat ion in relat ion t o smoke product ion is: The addit ional classificat ion in relat ion t o f laming droplet s / part icles is: B s1 d0 Reaction to fire classification: B s1, d0 This report consist s of six pages and may only be used in it s ent iret y. Page 5 / 6

6 4.3 FIELD OF APPLICATION This classificat ion is valid for t he following product paramet ers: Thickness Film 95 µm Surface densit y Approx. 150 g/ m 2 This classificat ion is valid for t he following end use applicat ions: Subst rat e Air gap Met hods and means of fixing Joint s Ot her aspect s of end use condit ions St eel sheet, t hickness approx. 1.2 mm (class A1/ A2 according t o EN 13238:2010) Including an air gap Glued, using t he product s adhesive Vert ical j oint s only Wall covering 4.4 DURATION OF THE VALIDITY OF THIS REPORT There are no limit at ions in t ime on t he validit y of t his report. 5. LIMITATIONS This classificat ion document does not represent t ype approval or cert ificat ion of t he product. C.C.M. St einhage B.Sc. Proj ect leader react ion t o fire A.J. Lock Proj ect leader react ion t o fire This report consist s of six pages and may only be used in it s ent iret y. Page 6 / 6