Applications of the Micro Reaction Calorimeter
|
|
- John Norris
- 5 years ago
- Views:
Transcription
1 Applications of the Micro Reaction Calorimeter
2 Power-compensation method. Versatility Automated sample addition, repeated or timed. Wide temperature range Pressure measurement Stirring Highly sensitive Unattended operation Small footprint Moderate cost / benefits
3 The Micro Reaction Calorimeter has a wide range of potential applications. Any reaction where heat is produced or consumed (endo or exothermic) will be suitable for study with this technique. The quantification of heats of this kind will be important in: Process safety Process optimisation Process development Deviation studies Catalyst Screening Material compatibility Inter-material Reactivity Stability and storage testing Reaction Screening Kinetic analysis and development Binding studies Environmental studies Shelf Life Material Curing
4 The Micro Reaction Calorimeter can operate in number of different modes. 1. Incremental titration (Titration Calorimetry) 2. Continuous addition (Reaction Calorimetry) 3. Single shot addition (Safety Calorimetry) 4. Calibration, heater pulse (Specific Heat Measurement) 5. Non addition - stability and storage (Isothermal Calorimetry) 6. Temperature ramping (Scanning Calorimetry) 7. Pressure measurement (Safety Calorimetry) The integrated addition syringe means that all liquid-liquid reactions can be conducted with walk-away operation minimising the users time requirement. But the instrument is not restricted to liquids.
5 Thermodynamic measurement Heats of reaction, mixing Kinetic development Process development and optimisation Catalyst development Academic research Teaching Other applications Measurement of equilibrium constants Determination of state changes
6 Reaction Calorimetry / Safety Example Acetic anhydride hydrolysis 5 µl of Acetic Anhydride into water
7 This application shows how quickly the Micro Reaction Calorimeter can obtain reaction heats for slow processes. Although this reaction takes almost an hour to complete the measurement of the heat takes very little additional time. Note the rapid response and also the initial endothermic contribution this is the heat of mixing! The results compare with the published values of 58.6 kj/mol Volume Added /µl 5.0 Mass added /g Formula Mass Amount reacted /mmol Peak Area / J Heat of reaction /(kj/mol) -58.4
8 Advantages of Micro Reaction Calorimetry for Process Safety Measurement The small volume of the system reduces cost, time and waste Process deviation studies (considering overcharging, over temperature and mal-operation) are therefore quick and easy Total saving can be several days work and litres of reagents/waste
9 Typical compatibility study 5 µl of Isopropanol into water
10 Typical reaction hazards study Reduction of strontium oxide by organic acid Highly exothermic 103kJ/mol Shows the µrc s ability to measure highly exothermic systems and the reactions between solids and liquids
11 Process optimisation / catalyst study Data shows the kinetics of the reaction: Decreasing maximum heat shows the decrease in reactant concentration whilst the overall integral remains constant 4 consecutive injections of 10µl anhydride
12 Reaction calorimetry can easily be used for kinetic analysis. Low Volume systems improve the ability to collect better kinetic data Power compensation method gives rapid response improves the ability to get quality kinetic data Heat is directly related to reaction conversion and therefore to reagent concentration. These experiments save a lot of time over conventional kinetic techniques.
13 10ml injections of anhydride were added to thiophene. Analysis of the data produced: H= H=-29kJ/mol rate constant of 3.9e -04 (kmol/m 3 ) /s. Heat production rate, kj/kg/min /s Time, min Points measured data Line kinetic fitting
14 Binding study (Supramolecular, Host-Guest Chemistry) Binding of 18-Crown-6 ether to Barium ions Decrease of reaction heat with increasing 18-Crown-6 shows the binding equilibrium
15 Binding study (Supramolecular, Host-Guest Chemistry) integral of the data, changing with amount added Binding equilibrium constant, heat of binding and stoichiometry all can be obtained easily from these data
16 Stability Testing, High Energy Materials - isothermal calorimetry The high thermal stability of the system paired with excellent heat detection makes this ideal for determination of time induced processes.
The THT micro reaction calorimeter μrc
The THT micro reaction calorimeter μrc Titration calorimetry isothermal calorimetry and scanning calorimetry - all in one instrument CHEMICAL APPLICATIONS BROCHURE Introduction and reaction kinetics The
More informationThe THT micro reaction calorimeter RC
The THT micro reaction calorimeter RC Titration calorimetry isothermal calorimetry and scanning calorimetry - all in one instrument C H E M I C A L A P P L I C A T I O N S B R O C H U R E Introduction
More informationMicro Reaction Calorimeter
C3 Prozess- und Analysentechnik GmbH Produktinformation µrc Micro Reaction Calorimeter Tel. (089) 45 60 06 70 info@c3-analysentechnik.de www.c3-analysentechnik.de The THT micro reaction calorimeter µrc
More informationCalorimetry: differential scanning calorimetry (DSC), isothermal titration calorimetry (ITC)
Calorimetry: differential scanning calorimetry (DSC), isothermal titration calorimetry (ITC) Dr. Yin Li Department of Biophysics, Medical School University of Pecs Thermal Analysis IUPAC definition - a
More informationcalorimeter heat flow calorimetry, power compensation calorimetry
calorimeter heat flow calorimetry, power compensation calorimetry Atlas simply does it all What is the Atlas Reaction Calorimeter? The Atlas Reaction Calorimeter accurately measures the power and enthalpy
More informationISoTherMal TITraTIon Calorimetry
ISoTherMal TITraTIon Calorimetry With the Nano ITC, heat effects as small as 1 nanojoules are detectable using one nanomole or less of biopolymer. The Nano ITC uses a solid-state thermoelectric heating
More information10.02 PE Diagrams. 1. Given the equation and potential energy diagram representing a reaction:
10.02 PE Diagrams 1. Given the equation and potential energy diagram representing a reaction: 3. Given the potential energy diagram and equation representing the reaction between substances A and D : If
More informationIMPROVED ADIABATIC CALORIMETRY IN THE PHI-TEC APPARATUS USING AUTOMATED ON-LINE HEAT LOSS COMPENSATION
# 27 IChemE IMPROVED ADIABATIC CALORIMETRY IN THE PHI-TEC APPARATUS USING AUTOMATED ON-LINE HEAT LOSS COMPENSATION B Kubascikova, D.G. Tee and S.P. Waldram HEL Ltd, 5 Moxon Street, Barnet, Hertfordshire,
More informationTHE USE OF DEWAR CALORIMETRY IN THE ASSESSMENT OF CHEMICAL REACTION HAZARDS
THE USE OF DEWAR CALORIMETRY IN THE ASSESSMENT OF CHEMICAL REACTION HAZARDS R.L. ROGERS* Dewar Calorimetry is one of the simplest and most useful techniques used in the assessment of chemical reaction
More informationAGrignard reaction, in which a reactant, A, is coupled with phenyl magnesium chloride, is used to
DEVELOPMENT OF AN EFFICIENT AND SAFE PROCESS FOR A GRIGNARD REACTION VIA REACTION CALORIMETRY H. Ferguson and Y. M. Puga The Dow Chemical Co., Inc. Engineering Sciences/Market Development A paper from
More informationSAMPLE CHEMISTRY QUESTIONS MIXTURE OF UNIT 3 & 4 MATERIALS
SAMPLE CHEMISTRY QUESTIONS MIXTURE OF UNIT 3 & 4 MATERIALS QUESTION 1 The equation describing the production of butyl ethanoate is given below. Catalyst C4H 9OH CH 3COOH CH 3COOC 4H 9 H 2O( l ) 0.0500
More informationCALORIMETRIA. strumenti ed applicazioni
09/11/2010 CALORIMETRIA strumenti ed applicazioni Università di Parma, 9 novembre 2010 R. Pepi TA Instruments Thermal Analysis Thermal analysis refers to a group of techniques in which a physical property
More informationExperiment #12. Enthalpy of Neutralization
Experiment #12. Enthalpy of Neutralization Introduction In the course of most physical processes and chemical reactions there is a change in energy. In chemistry what is normally measured is ΔH (enthalpy
More informationEnthalpy and Internal Energy
Enthalpy and Internal Energy H or ΔH is used to symbolize enthalpy. The mathematical expression of the First Law of Thermodynamics is: ΔE = q + w, where ΔE is the change in internal energy, q is heat and
More informationChapter Practice Test
Name: Class: Date: Chapter 17-18 Practice Test Multiple Choice Identify the choice that best completes the statement or answers the question. 1. Examining a chemical system before and after a reaction
More informationThe aldol condensation of benzaldehyde and acetone is a classical example of a spontaneous, exothermic reaction. To avoid controlled reagent addition
The aldol condensation of benzaldehyde and acetone is a classical example of a spontaneous, exothermic reaction. To avoid controlled reagent addition and cooling, the reaction was successfully translated
More informationThermochemistry. The study of the ENERGY CHANGES that accompany changes in matter. 3 Ways: Monday, February 3, 2014
Thermochemistry The study of the ENERGY CHANGES that accompany changes in matter 3 Ways: 1 Thermodynamics FIRST LAW OF THERMODYNAMICS the total amount of energy in the universe is constant (conservation
More informationCalorimetric Determination of Reaction Enthalpies
H + (aq) + OH - q H 2 O Calorimetric Determination of Reaction Enthalpies Purpose: Determine the enthalpy of dissociation of CH 3 COOH CH 3 COOH (aq) CH 3 COO - (aq) + H + (aq) Techniques: Calorimetry
More informationAP Chemistry: Designing an Effective Hand Warmer Student Guide INTRODUCTION
AP Chemistry: Designing an Effective Hand Warmer Student Guide INTRODUCTION AP and the Advanced Placement Program are registered trademarks of the College Entrance Examination Board. The activity and materials
More informationChapter Objectives. Chapter 9 Energy and Chemistry. Chapter Objectives. Energy Use and the World Economy. Energy Use and the World Economy
Chapter Objectives Larry Brown Tom Holme www.cengage.com/chemistry/brown Chapter 9 Energy and Chemistry Explain the economic importance of conversions between different forms of energy and the inevitability
More information7.1 Dynamic Equilibrium
7.1 Dynamic 7.1.1 - Outline the characteristics of chemical and physical systems in a state of equilibrium Open system When a reaction occurs in an unsealed container Closed system When a reaction occurs
More informationReaction Calorimetry as a Tool in Process Development, Research and Safety Analysis
Reaction Calorimetry as a Tool in Process Development, Research and Safety nalysis Rikard Widell Department of Chemical Engineering II, Lund University, P. O. Box 14, SE-1 Lund, Sweden bstract Reaction
More informationCHEMICAL KINETICS (RATES OF REACTION)
Kinetics F322 1 CHEMICAL KINETICS (RATES OF REACTION) Introduction Chemical kinetics is concerned with the dynamics of chemical reactions such as the way reactions take place and the rate (speed) of the
More informationHow many grams of ethylene glycol must be added to 6.00 kg of water to lower its freezing point to C? ETHYLENE GLYCOL:
How many grams of ethylene glycol must be added to 6.00 kg of water to lower its freezing point to -11.0 C? ETHYLENE GLYCOL: 77 KINETICS - the study of the RATE of chemical reactions. Or, the study of
More informationAgilent G3212 GC-APCI Source
Agilent G3212 GC-APCI Source Quick Start Guide Where to find information 2 Getting Started 3 Step 1. Start the Data Acquisition program for the GC and the Q-TOF 3 Step 2. Prepare the GC and Q-TOF for data
More information4 th Edition Chapter 9
Insert Page 547A 4 th Edition Chapter 9 In summary, if any one of the following three things had not occurred the explosion would not have happened. 1. Tripled production 2. Heat exchanger failure for
More informationChemistry Honors Curriculum Pacing Guide
Chemistry Honors Curriculum Guide 2013-2014 Areas Unit 1 - Scientific Inquiry Unit 2 - Measurement C-1.2 C-1.4 C-1.5 C-1.6 C-1.8 Daily - 4 days A/B - 2 days Use appropriate laboratory apparatuses, technology,
More informationChapter 3: Energy and Work. Energy and Work, con t. BCH 4053 Spring 2003 Chapter 3 Lecture Notes. Slide 1. Slide 2
BCH 4053 Spring 2003 Chapter 3 Lecture Notes 1 Chapter 3: Thermodynamics of Biological Systems 2 Energy and Work Work = force x distance Energy = ability to do work Mechanical Energy Kinetic Energy = mv
More informationN H 2 2 NH 3 and 2 NH 3 N H 2
Chemical Equilibrium Notes (Chapter 18) So far, we ve talked about all chemical reactions as if they go only in one direction. However, as with many things in life, chemical reactions can go both in the
More informationCalorimetry: Heat of Solution
Calorimetry: Heat of Solution When a substance undergoes a change in temperature, the quantity of heat lost or gained can be calculated using the following relationship: (heat) = m s T (1) The specific
More informationResults of Evaluation of the LKB 2277 Calorimeter for stability testing of Pharmaceuticals
Results of Evaluation of the LKB 2277 Calorimeter for stability testing of Pharmaceuticals M.J. Pikal Lilly Research Laboratories Indianapolis, Indiana, USA Background At the preformulation stage of product
More informationMeasuring and Expressing Enthalpy Changes. Copyright Pearson Prentice Hall. Measuring and Expressing Enthalpy Changes. Calorimetry
Measuring and Expressing Enthalpy Changes A burning match releases heat to its surroundings in all directions. How much heat does this exothermic reaction release? You will learn to measure heat flow in
More informationCharacterization of Solid State Drugs by Calorimetry
Characterization of Solid State Drugs by Calorimetry Christin T. Choma TA Instruments, 109 Lukens Drive, New Castle, DE 19720, USA Drug product development and manufacture requires numerous studies to
More information3.2 Calorimetry and Enthalpy
3.2 Calorimetry and Enthalpy Heat Capacity Specific heat capacity (c) is the quantity of thermal energy required to raise the temperature of 1 g of a substance by 1 C. The SI units for specific heat capacity
More informationEXPERIMENTAL STUDY OF THE LIQUID PHASE HYDROLYSIS REACTION OF TITANIUM TETRACHLORIDE
EXPERIMENTAL STUDY OF THE LIQUID PHASE HYDROLYSIS REACTION OF TITANIUM TETRACHLORIDE Luc Vechot 1, Jonathan E. H. Buston 1, Jake Kay 1, Glen A. Round 2, Shishir Masharani 2, Graham A. Tickle 3, and Ralph
More informationWe use a special symbol to denote a reaction which is reversible: The double-headed arrow means the reaction can go in either direction
Reversible reactions Some reactions do not go to completion we don t get 100% yield because not all of the reactants react to form products. One of the reasons for this is that some reactions are reversible
More informationS2004 Methods for characterization of biomolecular interactions - classical versus modern
S2004 Methods for characterization of biomolecular interactions - classical versus modern Isothermal Titration Calorimetry (ITC) Eva Dubská email: eva.dubska@ceitec.cz Outline Calorimetry - history + a
More informationThermochemistry: Calorimetry and Hess s Law
Thermochemistry: Calorimetry and Hess s Law Some chemical reactions are endothermic and proceed with absorption of heat while others are exothermic and proceed with an evolution of heat. The magnitude
More informationQuick Start: Isothermal Titration Calorimetry (ITC)
Quick Start: Isothermal Titration Calorimetry (ITC) Keywords: Isothermal titration calorimetry, experimental design MCAPN-216-1 INTRODUCTION Isothermal titration calorimetry (ITC) is a technique used to
More informationChemistry 6A F2007. Dr. J.A. Mack 11/19/07. Chemical Kinetics measure the rate of appearance of products or the rate of disappearance of reactants.
Chemistry 6A F2007 Dr. J.A. Mack Chemical Kinetics measure the rate of appearance of products or the rate of disappearance of reactants. Reactants Products Reactants go away with time. Products appear
More informationThe Enthalpies of Reactions
The Enthalpies of Reactions Collect 2 Styrofoam cups & a cup lid Digital thermometer Stop watch (from TA) Prepare 400 ml beaker 50 ml graduated cylinder * Take the warm water heated in hood (2015/09/20
More informationTitration Curves equivalence point
1 Here is an example of a titration curve, produced when a strong base is added to a strong acid. This curve shows how ph varies as 0.100 M NaOH is added to 50.0 ml of 0.100 M HCl. The equivalence point
More informationExperiment Nein! Acid Base. Equilibria. Last Week. This week. CH 204 Fall 2008 Dr. Brian Anderson
Slide 1 Experiment Nein! Acid Base Equilibria CH 204 Fall 2008 Dr. Brian Anderson Slide 2 Last Week Heat in chemical reactions: heat is a measurable quantity produced and consumed in stoichiometric amounts
More informationTo use calorimetry results to calculate the specific heat of an unknown metal. To determine heat of reaction ( H) from calorimetry measurements.
Calorimetry PURPOSE To determine if a Styrofoam cup calorimeter provides adequate insulation for heat transfer measurements, to identify an unknown metal by means of its heat capacity and to determine
More informationMultiple Choice Identify the letter of the choice that best completes the statement or answers the question.
CP Chem Review 2 Matching Match each item with the correct statement below. a. activated complex d. activation energy b. reaction rate e. free energy c. inhibitor 1. the minimum energy colliding particles
More informationExp 09: Heat of Reaction
Your job is to use a calorimeter to determine the heat of reaction for three different chemical reactions. Each of these reactions is an acid-base neutralization reaction. Before using your calorimeter
More information7.4 Potential Energy Diagrams
Name: Date: Chemistry ~ Ms. Hart Class: Anions or Cations Remember: 7.4 Potential Energy Diagrams Chemical reactions can react in both the and directions All chemical reactions need Reactions can either
More informationReaction Stoichiometry
Reaction Stoichiometry PURPOSE To determine the stoichiometry of acid-base reactions by measuring temperature changes which accompany them. GOALS To learn to use the MicroLab Interface. To practice generating
More informationKc is calculated for homogeneous reactions using the concentrations of the reactants and products at equilibrium:
Chemical Equilibrium Dynamic Equilibrium A dynamic equilibrium exists in a closed system when the rate of the forward reaction is equal to the rate of the reverse reaction. When a dynamic equilibrium is
More informationTitle: Bulk Thermal Stability Characterization via the SBAT Apparatus
Title: Bulk Thermal Stability Characterization via the SBAT Apparatus Author: Clint Guymon, PhD PE, Chemical Engineer, Safety Management Services, Inc. Robert (Bob) Ford, President, Safety Management Services,
More informationIncorporation of Reaction Chemicals Testing Data in Reactivity Hazard Evaluation. Ken First Dow Chemical Company Midland, MI
Incorporation of Reaction Chemicals Testing Data in Reactivity Hazard Evaluation Ken First Dow Chemical Company Midland, MI Reactivity Hazard Screening Evaluation Evaluation of reactivity hazards involves
More informationUnit 7 Kinetics and Thermodynamics
17.1 The Flow of Energy Heat and Work Unit 7 Kinetics and Thermodynamics I. Energy Transformations A. Temperature 1. A measure of the average kinetic energy of the particles in a sample of matter B. Heat
More informationExperiment 14 - Heats of Reactions
Experiment 14 - Heats of Reactions If a chemical reaction is carried out inside a calorimeter, the heat evolved or absorbed by the reaction can be determined. A calorimeter is an insulated container, and
More information8.6 The Thermodynamic Standard State
8.6 The Thermodynamic Standard State The value of H reported for a reaction depends on the number of moles of reactants...or how much matter is contained in the system C 3 H 8 (g) + 5O 2 (g) > 3CO 2 (g)
More informationI. CHEM. E. SYMPOSIUM SERIES NO. 68
ADIABATIC CALORIMETRY AND SIKAREX TECHNIQUE L. Hub* The suitability of adiabatic calorimetry for safety investigations, the specific requirements on the experimental set-up and the problems of correct
More informationAP LAB 9b: Indirect Enthalpy Changes
AP LAB 9b: Indirect Enthalpy Changes Aim To indirectly determine the enthalpy change for the combustion of magnesium Apparatus Coffee-cup calorimeter, thermometer, weighing boat, spatula, goggles, electronic
More informationProposed Content for the Project (Scope and Sequence)
Proposed Content for the Project (Scope and Sequence) The scope and sequence of the proposed project is not unusual. It follows the path of many available general chemistry texts. What we feel is innovative
More informationInvestigation of adiabatic batch reactor
Investigation of adiabatic batch reactor Introduction The theory of chemical reactors is summarized in instructions to Investigation of chemical reactors. If a reactor operates adiabatically then no heat
More informationChemistry 200: General Chemistry I - Lecture
Name Date Chemistry 200: General Chemistry I - Lecture Exam #3, 100 Points Total Form: A Read all directions carefully. Answers not conforming to the directions will be marked as incorrect! Section 1:
More informationHW Help. How do you want to run the separation? Safety Issues? Ease of Processing
HW Help Perform Gross Profitability Analysis on NaOH + CH4 --> Na+CO+H NaOH+C-->Na+CO+1/H NaOH+1/ H-->Na+HO NaOH + CO Na+CO+1/H How do you want to run the reaction? NaOH - Solid, Liquid or Gas T for ΔGrxn
More informationReaction Energy. Thermochemistry
Reaction Energy Thermochemistry Thermochemistry The study of the transfers of energy as heat that accompany chemical reactions & physical changes Thermochemistry -In studying heat changes, think of defining
More informationIB Chemistry Solutions Gasses and Energy
Solutions A solution is a homogeneous mixture it looks like one substance. An aqueous solution will be a clear mixture with only one visible phase. Be careful with the definitions of clear and colourless.
More informationCalorimetric Principles and TAM III
Calorimetric Principles and III Nomenclature t P Φ (dq/) Q H time Heat production rate or Thermal power Heat flow heat Enthalpy change [sec] [W = J s -1 ] [W = J s -1 ] [J] [J mol -1, J g -1 ] Thermal
More informationChapter Chemical Kinetics
CHM 51 Chapter 13.5-13.7 Chemical Kinetics Graphical Determination of the Rate Law for A Product Plots of [A] versus time, ln[a] versus time, and 1/[A] versus time allow determination of whether a reaction
More informationCAMOSUN COLLEGE. Chemistry 121 Section 03
CAMOSUN COLLEGE Chemistry 121 Section 03 Instructor: H. M. Cartwright Page 1 Midterm 2 Examination, March 25 th, 2015, 6.30 p.m. Time: 1 ½ hours Name Student Number Answer all questions on the examination
More informationCHEM*3440. Thermal Methods. Thermogravimetry. Instrumental Components. Chemical Instrumentation. Thermal Analysis. Topic 14
Thermal Methods We will examine three thermal analytical techniques: Thermogravimetric Analysis (TGA) CHEM*3440 Chemical Instrumentation Topic 14 Thermal Analysis Differential Thermal Analysis (DTA) Differential
More informationUNIT #10: Reaction Rates Heat/Energy in Chemical Reactions Le Chatlier s Principle Potential Energy Diagrams
UNIT #10: Reaction Rates Heat/Energy in Chemical Reactions Le Chatlier s Principle Potential Energy Diagrams NAME: 1. REACTION RATES a) The speed of a chemical reaction determined by the change in concentration
More informationMicroCal itc 200. System MicroCal Auto-iTC 200. System. GE Healthcare Life Sciences. System design and description. provide:
GE Healthcare Life Sciences Data file 28-97822 AC MicroCal label-free interaction analysis MicroCal itc 2 System MicroCal Auto-iTC 2 System MicroCal itc 2 and MicroCal Auto-iTC 2 isothermal titration calorimetry
More informationCHEMISTRY CONTENT SKILLS CHART
I. NATURE OF CHEMISTRY A. Safety B. Fundamental quantitative relationships 1. Metric system a. Prefixes b. Difference between base units and derived units 2. Significant figures 3. Scientific notation
More informationChapter 8 Thermochemistry: Chemical Energy. Chemical Thermodynamics
Chapter 8 Thermochemistry: Chemical Energy Chapter 8 1 Chemical Thermodynamics Chemical Thermodynamics is the study of the energetics of a chemical reaction. Thermodynamics deals with the absorption or
More informationEnergy Changes, Reaction Rates and Equilibrium. Thermodynamics: study of energy, work and heat. Kinetic energy: energy of motion
Energy Changes, Reaction Rates and Equilibrium Thermodynamics: study of energy, work and heat Kinetic energy: energy of motion Potential energy: energy of position, stored energy Chemical reactions involve
More informationExam 4, Ch 14 and 15 December 7, Points
Chem 130 Name Exam 4, Ch 14 and 15 December 7, 2016 100 Points Please follow the instructions for each section of the exam. Show your work on all mathematical problems. Provide answers with the correct
More informationExam 3, Ch 7, 19, 14 November 9, Points
Chem 30 Name Exam 3, Ch 7, 9, 4 November 9, 206 00 Points Please follow the instructions for each section of the exam. Show your work on all mathematical problems. Provide answers with the correct units
More informationEnzyme Kinetics Using Isothermal Calorimetry. Malin Suurkuusk TA Instruments October 2014
Enzyme Kinetics Using Isothermal Calorimetry Malin Suurkuusk TA Instruments October 2014 ITC is a powerful tool for determining enzyme kinetics Reactions, including enzymatic reactions, produce or absorb
More information= (25.0 g)(0.137 J/g C)[61.2 C - (-31.4 C)] = 317 J (= kj)
CHEM 101A ARMSTRONG SOLUTIONS TO TOPIC D PROBLEMS 1) For all problems involving energy, you may give your answer in either joules or kilojoules, unless the problem specifies a unit. (In general, though,
More informationThe Clinical Chemistry System that offers more so you do less!
The Clinical Chemistry System that offers more so you do less! A unique level of automation in a compact system Safe and flexible sample management Fully automatic cuvette management Cuvette management
More informationChemistry Slide 1 of 33
Chemistry 17.2 1 of 33 17.2 Measuring and Expressing Enthalpy Changes A burning match releases heat to its surroundings in all directions. How much heat does this exothermic reaction release? You will
More informationAP Chemistry Standards and Benchmarks
Standard: Understands and applies the principles of Scientific Inquiry Benchmark 1: Scientific Reasoning Course Level Benchmarks A. Formulates and revises scientific explanations and models B. Understands
More informationTA Instruments Application Note
Q ( µj) TA Instruments Application Note Isothermal Titration Calorimetry (ITC) with Reduced Cell Volumes: A Comparison of the TA Instruments Nano ITC-Low Volume with the GE Healthcare Auto-iTC 200. Colette
More informationFor purification/separation of organic and aqueous phases from a two phase mixture within a 96 or 24 array tube system
Lollipop Phase Separator For purification/separation of organic and aqueous phases from a two phase mixture within a 96 or 24 array tube system Lollipop Phase Separator GreenHouse Parallel Synthesiser
More informationReaction rate. reaction rate describes change in concentration of reactants and products with time -> r = dc j
Reaction rate ChE 400 - Reactive Process Engineering reaction rate describes change in concentration of reactants and products with time -> r = dc j /dt r is proportional to the reactant concentrations
More informationUnit 9a: Kinetics and Energy Changes
Unit 9a: Kinetics and Energy Changes Student Name: Key Class Period: Website upload 2015 Page 1 of 43 Unit 9a (Kinetics & Energy Changes) Key Page intentionally blank Website upload 2015 Page 2 of 43 Unit
More informationChemistry: The Central Science Twelfth Edition, AP* Edition 2012
A Correlation of The Central Science Twelfth Edition, AP* Edition 2012 to the AP* Chemistry Topics I. Structure of Matter A. Atomic theory and atomic structure 1. Evidence for the atomic theory SECTIONS:
More information2013, 2011, 2009, 2008 AP
Lecture 15 Thermodynamics I Heat vs. Temperature Enthalpy and Work Endothermic and Exothermic Reactions Average Bond Enthalpy Thermodynamics The relationship between chemical reactions and heat. What causes
More informationAtoms, Elements, Atoms, Elements, Compounds and Mixtures. Compounds and Mixtures. Atoms and the Periodic Table. Atoms and the.
Atoms, Elements, Compounds and Mixtures Explain how fractional distillation can be used to separate a mixture. 1 Atoms, Elements, Compounds and Mixtures Fractional distillation is used to separate components
More informationMULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question.
Exam Name MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question. 1) The effect of a catalyst on a chemical reaction is to. A) increase the entropy change
More informationEnergy Conversions. Energy. the ability to do work or produce heat. energy energy due to composition or position of an object
Energy Energy the ability to do work or produce heat energy energy due to composition or position of an object energy the energy of motion Energy - SI unit for energy 1 J = 1 Kgm 2 / s 2 Energy Conversions
More informationSaturday Study Session 1 3 rd Class Student Handout Thermochemistry
Saturday Study Session 1 3 rd Class Student Handout Thermochemistry Multiple Choice Identify the choice that best completes the statement or answers the question. 1. C 2 H 4 (g) + 3 O 2 (g) 2 CO 2 (g)
More informationwith increased Lecture Summary #33 Wednesday, December 3, 2014
5. Lecture Summary #33 Wednesday, December 3, 204 Reading for Today: 4.-4.3 in 5 th ed and 3.-3.3 in 4 th ed Reading for Lecture #34: 4.4 & 4.6 in 5 th ed and 3.4 & 3.6 in 4 th ed Topic: Kinetics I. Effect
More informationNote: 1 calorie = 4.2 Joules
Enthalpy Changes All substances contain chemical energy, called enthalpy. Like any kind of energy it is measured in Joules (previously energy was measured in Calories). When reactions happen, energy is
More informationA dual redox-responsive supramolecular amphiphile fabricated by selenium-containing pillar[6]arene-based molecular recognition
Electronic Supplementary Material (ESI) for ChemComm. This journal is The Royal Society of Chemistry 2018 A dual redox-responsive supramolecular amphiphile fabricated by selenium-containing pillar[6]arene-based
More informationChemical Thermodynamics
Chemical Thermodynamics 1 Thermodynamics Thermodynamics is a Greek term which means, heat power. Thermodynamics is the study of energy and its transformations. 2 Thermodynamics Thermochemistry how we observe,
More informationhigh performance OPTIC 3 and applications a total analytical solution
high performance OPTIC 3 and applications a total analytical solution Excellent by nature Excellent effectivity, efficient performance and great flexibility. OPTIC 3: a fully programmable injector for
More informationChp 13, 14, 15 SHOW ALL WORK AND CIRCLE FINAL ANSWERS. a) 1 only b) 2 only c) 3 only d) 1 and 2 only e) 1, 2, and H 2
Chp 13, 14, 15 Name: SHOW ALL WORK AND CIRCLE FINAL ANSWERS 1. Which of the following factors affect the initial rate of a reaction? 1) The nature of the reactants. 2) The concentration of the reactants.
More informationFirst Law of Thermodynamics
Energy Energy: ability to do work or produce heat. Types of energy 1) Potential energy - energy possessed by objects due to position or arrangement of particles. Forms of potential energy - electrical,
More informationPractice Test: Energy and Rates of Reactions
Practice Test: Energy and Rates of Reactions NAME: /65 Multiple Choice Identify the letter of the choice that best completes the statement or answers the question. (20 marks) 1. What is the symbol for
More informationJust a reminder that everything you do related to lab should be entered directly into your lab notebook. Calorimetry
Just a reminder that everything you do related to lab should be entered directly into your lab notebook. Objectives: Calorimetry After completing this lab, you should be able to: - Assemble items of common
More information1. Entropy questions: PICK TWO (6 each)
1. Entropy questions: PICK TWO (6 each) 1.00 mole of water freezes at 0.00ºC and 1 atm, releasing 6.01 kj of heat. Calculate the change in entropy and free energy for the process. Calculate the entropy
More informationIntermolecular Forces 2 nd Semester Review Questions and Problems
Intermolecular Forces 2 nd Semester Review Questions and Problems 1. Complete the following table: Molecule Lewis Structure Molecule Shape Polar/Nonpolar CS 2 H 3 O + CdBr 2 CHI 3 2. What makes the dipole
More informationEquilibrium and Reaction Rate
Equilibrium and Reaction Rate Multiple Choice Questions - Answers 1. Activation energy could be considered as the minimum energy required to do which of these? A. change the orientation of the reactant
More information